SIST EN ISO 10991:2010

SLOVENSKI STANDARD
oSIST prEN ISO 10991:2008
01-november-2008
Mikroprocesna tehnika - Terminologija (ISO/DIS 10991:2008)
Micro process engineering - Terminology (ISO/DIS 10991:2008)
Mikroverfahrenstechnik - Begriffe (ISO/DIS 10991:2008)
Microtechnique des procédés - Vocabulaire (ISO/DIS 10991:2008)
Ta slovenski standard je istoveten z: prEN ISO 10991
ICS:
01.040.71 Kemijska tehnologija Chemical technology
(Slovarji) (Vocabularies)
71.020 Proizvodnja v kemijski Production in the chemical
industriji industry
oSIST prEN ISO 10991:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 10991:2008

---------------------- Page: 2 ----------------------
oSIST prEN ISO 10991:2008
EUROPEAN STANDARD
DRAFT
prEN ISO 10991
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2008
ICS 01.040.71; 71.020

English Version
Micro process engineering - Terminology (ISO/DIS 10991:2008)
Microtechnique des procédés - Vocabulaire (ISO/DIS Mikroverfahrenstechnik - Begriffe (ISO/DIS 10991:2008)
10991:2008)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/TC 332.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
: This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
Warning
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 10991:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN ISO 10991:2008
prEN ISO 10991:2008 (E)
Contents Page
Foreword.3

2

---------------------- Page: 4 ----------------------
oSIST prEN ISO 10991:2008
prEN ISO 10991:2008 (E)
Foreword
This document (prEN ISO 10991:2008) has been prepared by Technical Committee ISO/TC 48 "Laboratory
glassware and related apparatus" in collaboration with Technical Committee CEN/TC 332 “Laboratory
equipment”, the secretariat of which is held by DIN.
This document is currently submitted to the parallel Enquiry.
Endorsement notice
The text of ISO/DIS 10991:2008 has been approved by CEN as a prEN ISO 10991:2008 without any
modification.

3

---------------------- Page: 5 ----------------------
oSIST prEN ISO 10991:2008

---------------------- Page: 6 ----------------------
oSIST prEN ISO 10991:2008
DRAFT INTERNATIONAL STANDARD ISO/DIS 10991
ISO/TC 48 Secretariat: DIN
Voting begins on: Voting terminates on:
2008-09-04 2009-02-04
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Micro process engineering — Terminology
Microtechnique des procédés — Vocabulaire
ICS 01.040.71; 71.040.10

ISO/CEN PARALLEL ENQUIRY
The CEN Secretary-General has advised the ISO Secretary-General that this ISO/DIS covers a subject
of interest to European standardization. In accordance with the ISO-lead mode of collaboration as
defined in the Vienna Agreement, consultation on this ISO/DIS has the same effect for CEN
members as would a CEN enquiry on a draft European Standard. Should this draft be accepted, a
final draft, established on the basis of comments received, will be submitted to a parallel two-month FDIS
vote in ISO and formal vote in CEN.
In accordance with the provisions of Council Resolution 15/1993 this document is circulated in
the English language only.
Conformément aux dispositions de la Résolution
...