SIST EN 17877:2024
(Main)Dynamic mixers and agitators - Definitions and hydraulic characterizations
Dynamic mixers and agitators - Definitions and hydraulic characterizations
This document defines the terms and definitions relating to the field of dynamic mixing and agitation. It covers the hydraulic characteristics of mixers and agitators. It is intended to contribute to mutual understanding of the various stakeholders in a mixing or agitation project: manufacturers, users, integrators, inspection agencies...
This document applies to mixing and agitation systems where there is at least one dominant liquid phase.
It does not apply to:
- static mixers;
- kneaders;
- submersible mixers covered by ISO 21630;
- aerators;
- pumps.
Annex A lists the definitions by alphabetic order.
Dynamische Agitatoren - Definition und hydraulische Charakteristik
Dieses Dokument legt die Begriffe fest, die sich auf das Gebiet des dynamischen Rührens beziehen. Es behandelt die hydraulischen Eigenschaften von Agitatoren. Es soll zum gegenseitigen Verständnis der verschiedenen Beteiligten an einem Rührprojekt beitragen: z. B. Hersteller, Anwender, Integratoren, Prüfstellen.
Dieses Dokument ist anwendbar auf Rührsysteme mit mindestens einer dominanten Flüssigphase.
Es ist nicht anwendbar auf Folgende:
- statische Mischer;
- Kneter;
- Tauchrührwerke, die in ISO 21630 behandelt werden;
- Belüfter;
- Pumpen.
In Anhang A werden die Begriffe in alphabetischer Reihenfolge aufgeführt.
Mélangeurs et agitateurs dynamiques - Définitions et caractéristiques hydrauliques
Le présent document définit les termes et définitions relatifs au domaine du mélange et de l’agitation dynamiques. Il couvre les caractéristiques hydrauliques des mélangeurs et agitateurs. Il vise à contribuer à la compréhension mutuelle des différentes parties prenantes dans un projet de mélange ou d’agitation : fabricants, utilisateurs, intégrateurs, organismes de contrôle...
Le présent document s’applique aux systèmes de mélange et d’agitation où il existe au moins une phase dominante liquide.
Il ne s’applique pas aux :
- mélangeurs statiques ;
- malaxeurs ;
- mélangeurs immergés couverts par l'ISO 21630 ;
- aérateurs ;
- pompes.
L'Annexe A énumère les définitions par ordre alphabétique.
Dinamične mešalne naprave in mešala - Definicije in hidravlične karakteristike
Ta dokument določa izraze in definicije v zvezi z dinamičnim mešanjem in stresanjem. Obravnava hidravlične karakteristike mešalnih naprav in mešal. Njegov namen je prispevati k medsebojnemu razumevanju različnih deležnikov, ki so vključeni v projekt mešanja oziroma stresanja: proizvajalcev, uporabnikov, integratorjev, inšpekcijskih služb itd.
Ta dokument se uporablja za sisteme za mešanje in stresanje, pri katerih prevladuje vsaj ena tekoča faza.
Ne uporablja se za:
– statične mešalnike;
– gnetilnike;
– potopne mešalnike, zajete v standardu ISO 21630;
– prezračevalnike;
– črpalke.
V dodatku A so navedene definicije v abecednem vrstnem redu.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 17877:2024
01-januar-2024
Dinamične mešalne naprave in mešala - Definicije in hidravlične karakteristike
Dynamic mixers and agitators - Definitions and hydraulic characterizations
Dynamische Agitatoren - Definition und hydraulische Charakteristik
Mélangeurs et agitateurs dynamiques - Définitions et caractéristiques hydrauliques
Ta slovenski standard je istoveten z: EN 17877:2023
ICS:
01.040.23 Tekočinski sistemi in sestavni Fluid systems and
deli za splošno rabo (Slovarji) components for general use
(Vocabularies)
23.100.99 Drugi sestavni deli Other fluid power system
hidravličnih sistemov components
SIST EN 17877:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 17877:2024
---------------------- Page: 2 ----------------------
SIST EN 17877:2024
EN 17877
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2023
EUROPÄISCHE NORM
ICS 01.040.23; 23.100.99
English Version
Dynamic mixers and agitators - Definitions and hydraulic
characterizations
Mélangeurs et agitateurs dynamiques - Définitions et Dynamische Mischer und Rührwerke - Definition und
caractéristiques hydrauliques hydraulische Charakteristik
This European Standard was approved by CEN on 8 October 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17877:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 17877:2024
EN 17877:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
3.1 Basic mixing operations . 5
3.2 Mixing parts . 6
3.3 Mixer types . 17
3.4 Impeller types . 21
3.5 Hydraulic data . 28
3.6 Mechanical data . 37
4 Symbols and associated formulae . 40
Annex A (informative) Alphabetical index . 45
Bibliography .
...
SLOVENSKI STANDARD
oSIST prEN 17877:2022
01-september-2022
Dinamične mešalne naprave in mešala - Definicije in hidravlične karakteristike
Dynamic mixers and agitators - Definitions and hydraulic characterizations
Dynamische Agitatoren - Definition und hydraulische Charakteristik
Mélangeurs et agitateurs dynamiques - Définitions et caractéristiques hydrauliques
Ta slovenski standard je istoveten z: prEN 17877
ICS:
01.040.23 Tekočinski sistemi in sestavni Fluid systems and
deli za splošno rabo (Slovarji) components for general use
(Vocabularies)
23.100.99 Drugi sestavni deli Other fluid power system
hidravličnih sistemov components
oSIST prEN 17877:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 17877:2022
---------------------- Page: 2 ----------------------
oSIST prEN 17877:2022
DRAFT
EUROPEAN STANDARD
prEN 17877
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2022
ICS 01.040.23; 23.100.99
English Version
Dynamic mixers and agitators - Definitions and hydraulic
characterizations
Mélangeurs et agitateurs dynamiques - Définitions et Dynamische Agitatoren - Definition und hydraulische
caractéristiques hydrauliques Charakteristik
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 458.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17877:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 17877:2022
prEN 17877:2022 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
3.1 Basic mixing operations . 5
3.2 Mixing parts . 6
3.3 Mixer types . 18
3.4 Impeller types . 22
3.5 Hydraulic data . 29
3.6 Mechanical data . 37
4 Symbols and associated for
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.