iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN IEC 60404-6:2018/AC:2019

(Corrigendum)

Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens (IEC 60404-6:2018/COR1:2018)

Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens (IEC 60404-6:2018/COR1:2018)

IEC - Corrected version

Magnetische Werkstoffe - Teil 6: Verfahren zur Messung der magnetischen Eigenschaften weichmagnetischer und pulverförmiger Werkstoffe bei Frequenzen im Bereich 20 Hz bis 100 kHz mit Hilfe von Ringproben (IEC 60404-6:2018/COR1:2018)

Matériaux magnétiques - Partie 6: Méthodes de mesure des propriétés magnétiques des matériaux métalliques et des matériaux en poudre magnétiquement doux, aux fréquences comprises entre 20 Hz et 100 kHz, sur des éprouvettes en forme de tore (IEC 60404-6:2018/COR1:2018)

Magnetni materiali - 6. del: Metode merjenja magnetnih lastnosti mehkomagnetnih kovinskih in praškastih materialov s frekvencami v območju 20 Hz do 200 kHz z uporabo obročastih vzorcev - Popravek AC (IEC 60404-6:2018/COR1:2018)

General Information

Status
Published
Publication Date
10-Jan-2019
ICS
17.220.20 - Measurement of electrical and magnetic quantities
29.030 - Magnetic materials
Technical Committee
I11 - Imaginarni 11
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
03-Jan-2019
Due Date
10-Mar-2019
Completion Date
11-Jan-2019
Ref Project
EN IEC 60404-6:2018/AC:2018-12 - Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens

Relations

Corrects
SIST EN IEC 60404-6:2018 - Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens (IEC 60404-6:2018)
Effective Date
25-Dec-2018

Buy Standard

EN IEC 60404-6:2018/AC:2019EN IEC 60404-6:2018/AC:2019
PreviousNext
Corrigendum
EN IEC 60404-6:2018/AC:2019
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.PHKNRPDJQHWQLKMagnetische Werkstoffe - Teil 6: Verfahren zur Messung der magnetischen Eigenschaften weichmagnetischer und pulverförmiger Werkstoffe bei Frequenzen im Bereich 20 Hz bis 100 kHz mit Hilfe von Ringproben (IEC 60404-6:2018/COR1:2018)Matériaux magnétiques - Partie 6: Méthodes de mesure des propriétés magnétiques des matériaux métalliques et des matériaux en poudre magnétiquement doux, aux fréquences comprises entre 20 Hz et 100 kHz, sur des éprouvettes en forme de tore (IEC 60404-6:2018/COR1:2018)Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens (IEC 60404-6:2018/COR1:2018)29.030Magnetni materialiMagnetic materials17.220.20Measurement of electrical and magnetic quantitiesICS:Ta slovenski standard je istoveten z:EN IEC 60404-6:2018/AC:2018-12SIST EN IEC 60404-6:2018/AC:2019en01-marec-2019SIST EN IEC 60404-6:2018/AC:2019SLOVENSKI
STANDARD



SIST EN IEC 60404-6:2018/AC:2019



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN IEC 60404-6:2018/AC:2018-12
December 2018
ICS 17.220.20; 29.030 English Version
Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens (IEC 60404-6:2018/COR1:2018)
Matériaux magnétiques - Partie 6: Méthodes de mesure despropriétés magnétiques des matériaux métalliques et des matériaux en poudre magnétiquement doux, aux fréquences comprises entre 20 Hz et 100 kHz, sur des éprouvettes en forme de tore (IEC 60404-6:2018/COR1:2018)
Magnetische Werkstoffe - Teil 6: Verfahren zur Messung der magnetischen Eigenschaften weichmagnetischer und pulverförmiger Werkstoffe bei Frequenzen im Bereich 20 Hz bis 100 kHz mit Hilfe von Rin
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60404-12:2023(Main)
Magnetic materials - Part 12: Methods of test for the assessment of the thermal endurance of surface insulation coatings on electrical steel strip and sheet (IEC 60404-12:2023)
EN IEC 60404-12:2023

This part of IEC 60404 is applicable to surface insulation coatings on electrical steel strip and
sheet classified in IEC 60404-1-1.
This document defines the general principles and technical details of the tests for the
assessment of the thermal endurance of surface insulation coatings on electrical steel strip and
sheet.
The assessment is made by evaluating the change of a specified property of the surface
insulation coating due to a heat treatment at a specified temperature up to 850 °C for a specified
duration time up to 2 500 h. The specified property is measured at an ambient temperature of
(23 ± 5) °C both without heat treatment and after heat treatment.
This document is applicable to the following properties of surface insulation coatings:
– adhesion;
– surface insulation resistance;
– stacking factor.
This document is not applicable to other properties of surface insulation coatings, e.g. welding
properties, or to other effects, e.g. discoloration and off-gassing, which can be caused by
exposure to elevated temperatures.
NOTE Some of the tests take a very long time to perform and therefore they are often not appropriate for acceptance
tests of material supplied on a specific order.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60404-3:2023(Main)
Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester (IEC 60404-3:2022)
EN IEC 60404-3:2022

IEC 60404-3:2022 is available as IEC 60404-3:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60404-3:2022 is applicable to grain-oriented and non-oriented electrical steel strip and sheet for measurement of AC magnetic properties at power frequencies. The object of this document is to define the general principles and the technical details of the measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester (SST). This edition includes the following significant technical changes with respect to the previous edition:
- Annex A was revised. The method of determining the yokes’ lamination resistance was added to Annex A;
- Annex B of the consolidated version of 2010 referred to calibration of the SST using the Epstein method. It was cancelled;
- Annex B (new), Annex C and Annex D were revised, they are for information only;
- Annex C was modified taking account of the new situation regarding P and R grades;
- Annex D was amended by addition of Clause D.4 on the numerical air flux compensation.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60404-17:2022(Main)
Magnetic materials - Part 17: Methods of measurement of the magnetostriction characteristics of grainoriented electrical steel strip and sheet by means of a single sheet tester and an optical sensor (IEC 60404-17:2021)
EN IEC 60404-17:2021

This part of IEC 60404 is applicable to grain-oriented electrical steel strip and sheet specified in IEC 60404-8-7 for the measurement of magnetostriction characteristics under an applied AC magnetic field at 50 Hz or 60Hz.
This document defines the general principles and technical details of the measurement of magnetostriction characteristics of grain-oriented electrical steel strip and sheet by means of a single sheet tester and an optical sensor.
NOTE 1 The accelerometer method [5] is also an established method for the measurement of magnetostriction.
However, it is more suited to the measurement of magnetostriction under an externally applied tensile or compressive stress, not zero stress, because it places a weight on the test specimen to prevent a deformation of the test specimen.
Since this document includes the measurement at zero stress, the optical sensor method is provided as the optimum method.
This document is applicable to the measurement of:
- the butterfly loop;
- the peak-to-peak value λp-p;
- the zero-to-peak value λ0-p.
The magnetostriction characteristics are determined for a sinusoidal induced secondary voltage, for a specified peak value of the magnetic polarization and at a specified magnetizing frequency.
NOTE 2 Throughout this document the term “magnetic polarization” is used as described in IEC 60050-121-11-54.
In some standards of the 60404 series, the term “magnetic flux density” is used.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60404-6:2018/A1:2021(Amendment)
Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens (IEC 60404-6:2018/AMD1:2021)
EN IEC 60404-6:2018/A1:2021

No scope available

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60404-11:2021(Main)
Magnetic materials - Part 11: Methods of measurement of the surface insulation resistance of electrical steel strip and sheet (IEC 60404-11:2021)
EN IEC 60404-11:2021

This part of IEC 60404 is applicable to electrical steel strip and sheet insulated by coating on one or both surfaces.
The object of this document is to define the general principles and technical details of the measurement of the surface insulation resistance of electrical steel strip and sheet.
NOTE This test is suitable for manufacturing and quality control in the application of insulation coatings.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60404-7:2020(Main)
Magnetic materials - Part 7: Method of measurement of the coercivity (up to 160 kA/m) of magnetic materials in an open magnetic circuit (IEC 60404-7:2019)
EN IEC 60404-7:2020

IEC 60404-7 specifies a method of measurement of the coercivity of magneticmaterials in an open magnetic circuit.This document is applicable to all magnetic materials with coercivities from 0,2 A/m to160 kA/m.NOTE Examples of magnetic materials covered by this document are amorphous alloys, nanocrystalline alloys, allsoftmagnetic crystalline materials (e.g. Fe, FeSi-, CoFe- and FeNi-alloys), soft ferrites, hard metals, semi-hardmagnetic alloys (e.g. FeCoTiAl-, FeCoV-, FeCrCo- and AlNiCo-alloys) [1]1.Special precautions are to be taken in measuring coercivities below 40 A/m, in materials withhigh conductivity and in test specimens which have a shape different from ellipsoids (seeAnnex A).

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60404-16:2018/AC:2019(Corrigendum)
Magnetic materials - Part 16: Methods of measurement of the magnetic properties of Fe-based amorphous strip by means of a single sheet tester (IEC 60404-16:2018/COR1:2018)
EN IEC 60404-16:2018/AC:2018-12

IEC - Corrected version

  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60404-13:2019(Main)
Magnetic materials - Part 13: Methods of measurement of resistivity, density and stacking factor of electrical steel strip and sheet (IEC 60404-13:2018)
EN IEC 60404-13:2018

This part of IEC 60404 specifies the methods used for determining the resistivity, density and
stacking factor of grain-oriented and non-oriented electrical steel strip and sheet. These
quantities are necessary to establish the physical characteristics of the material. Moreover,
the density is necessary to allow specified values of the magnetic polarization, resistivity and
stacking factor to be determined.
Since these properties are functions of temperature, the measurements will be made at an
ambient temperature of (23 ±5) °C except when specified in this document.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60404-2:2002/A1:2008/AC:2018(Corrigendum)
Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of an Epstein frame (IEC 60404-2:1996/A1:2008/COR1:2018)
EN 60404-2:1998/A1:2008/AC:2018-08

IEC - Corrected version

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60404-16:2018(Main)
Magnetic materials - Part 16: Methods of measurement of the magnetic properties of Fe-based amorphous strip by means of a single sheet tester (IEC 60404-16:2018)
EN IEC 60404-16:2018

This part of IEC 60404 is applicable to Fe-based amorphous strips specified in IEC 60404-8-
11 for the measurement of AC magnetic properties at frequencies up to 400 Hz.
The object of this part is to define the general principles and technical details of the
measurement of the magnetic properties of Fe-based amorphous strips by means of a single
sheet tester.
The single sheet tester is applicable to test specimens obtained from Fe-based amorphous
strips of any quality. The AC magnetic characteristics are determined for a sinusoidal induced
voltage, for specified peak values of magnetic polarization and for a specified frequency.
The measurements are made at an ambient temperature of (23 ± 5) °C on test specimens
which have first been demagnetized.
NOTE 1 The single sheet tester specified in this document is appropriate for other materials which have magnetic
properties and physical characteristics similar to those of Fe-based amorphous strip, such as nano-crystalline soft
magnetic strip. The single sheet tester for electrical steel sheets is specified in IEC 60404-3.
NOTE 2 Throughout this document the term “magnetic polarization” is used as described in IEC 60050-121. In
some standards of the IEC 60404 series, the term “magnetic flux density” is used.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day