SIST EN 2714-009:2009
(Main)Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 009: Screened (spiral) and jacketed, YAG X3 laser printable - Product standard
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 009: Screened (spiral) and jacketed, YAG X3 laser printable - Product standard
This standard specifies the characteristics of YAG X3 laser printable, single and multicore screened (spiral) and jacketed electrical cables for use in the on-board electrical systems of aircraft, at operating temperatures between - 55 °° and 260 °C.
It shall also be possible to mark these cables by hot stamp printing or ink jet printing.
These markings shall be in accordance with EN 3838.
Luft- und Raumfahrt - Leitungen, elektrisch, ein- und mehradrig, für allgemeine Verwendung - Betriebstemperaturen zwischen - 55 °C und 260 °C - Teil 009: Geschirmt (Umseilung) und ummantelt, YAG X3 Laser bedruckbar - Produktnorm
Diese Norm legt die Eigenschaften von YAG X3 Laser bedruckbaren, ein und mehradrigen, geschirmten (Umseilung) und ummantelten elektrischen Leitungen fest, die zur Verwendung in Bordnetzen von Luftfahr¬zeugen bei Betriebstemperaturen zwischen - 55 °C und 260 °C bestimmt sind.
Es muss auch möglich sein, diese Leitungen mittels Heißprägung oder Tintenstrahl zu kennzeichnen.
Diese Kennzeichnungen müssen EN 3838 entsprechen.
Série aérospatiale - Câbles, électriques, mono et multiconducteurs d'usage général - Températures de fonctionnement comprises entre - 55 °C et 260 °C - Partie 009 : Blindés (guipés) et gainés, marquable au laser YAG X3 - Norme de produit
Aeronavtika - Eno- ali večžilni električni kabli za splošno uporabo - Delovne temperature med –55 °C in 260 °C - 009. del: Oklopljeni (spirala) in oplaščeni, z možnostjo laserskega tiskanja YAG X3 - Standard za proizvod
General Information
- Status
- Published
- Publication Date
- 13-Apr-2009
- Technical Committee
- I13 - Imaginarni 13
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 06-Apr-2009
- Due Date
- 11-Jun-2009
- Completion Date
- 14-Apr-2009
Overview
EN 2714-009:2007 (CEN) is a product standard for aerospace electrical cables - single- and multicore, screened (spiral) and jacketed - specified for use in on-board aircraft electrical systems at operating temperatures between −55 °C and 260 °C. The standard covers YAG X3 laser printable cables and requires compatibility with alternative marking methods (hot stamp and ink-jet) in accordance with EN 3838. It defines materials, construction, performance tests and identification/marking rules for reliable high-temperature aerospace cabling.
Key topics and technical requirements
- Scope & application: Intended for general-purpose aircraft wiring where high temperature resistance and traceable marking are required. Cables have 1 to 4 cores; 2–4 core cables must be twisted (EN 2235).
- Materials & construction:
- Cores per EN 2267-003 (nominal sections from ~0.15 mm² to 5 mm²; AWG references provided).
- Spiral screen: nickel-plated copper stranded spiral (plating and tests per EN 2083 and EN 3475-100).
- Outer jacket: multi-layer system - polyimide layer (
30 µm) coated both sides with fluorocarbon (2.5 µm), PTFE second layer (~0.07 mm) wound opposite to first layer, plus a dispersion fluorocarbon top coat (≥15 µm) to accept YAG X3 laser marking. - No filler cores permitted.
- Marking: Must accept YAG X3 laser marking; also compatible with hot stamp and ink-jet per EN 3838.
- Performance & tests (references to EN 3475-100): visual, mass, dimensions, ohmic resistance, voltage proof, insulation/surface resistance, accelerated ageing, shrinkage/delamination, thermal shock, bending/cold bend, flammability (extinguishing time ≤ 3 s), thermal endurance (40 000 h at 260 °C), resistance to fluids, notch propagation, scrape abrasion, plating tests, smoke density and toxicity.
- Quality & designation: Quality assurance per EN 9133; designation and identification rules provided (example code: EN2714-009B002F).
Applications and users
- Primary users: aerospace cable manufacturers, aircraft OEMs, electrical/harness design engineers, procurement/specification teams, maintenance and repair organizations.
- Practical applications:
- High-temperature wiring in engines, environmental control systems, and other heat-exposed aircraft zones.
- Locations requiring durable, permanently legible markings (YAG X3 laser) for traceability and maintenance records.
- Systems where flame, smoke and toxicity performance are critical.
Related standards
- EN 2714-002 (general screened & jacketed rules)
- EN 2235 (twisting, technical spec)
- EN 2267-003 (core insulation / ink-jet printable references)
- EN 2083 (conductors)
- EN 3475-100 (test methods)
- EN 3838 (user-applied markings)
- EN 9133 (quality management for aerospace parts)
Keywords: EN 2714-009, aerospace cables, YAG X3 laser printable, screened spiral cable, jacketed cable, high-temperature aircraft wiring, CEN standard.
Frequently Asked Questions
SIST EN 2714-009:2009 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 009: Screened (spiral) and jacketed, YAG X3 laser printable - Product standard". This standard covers: This standard specifies the characteristics of YAG X3 laser printable, single and multicore screened (spiral) and jacketed electrical cables for use in the on-board electrical systems of aircraft, at operating temperatures between - 55 °° and 260 °C. It shall also be possible to mark these cables by hot stamp printing or ink jet printing. These markings shall be in accordance with EN 3838.
This standard specifies the characteristics of YAG X3 laser printable, single and multicore screened (spiral) and jacketed electrical cables for use in the on-board electrical systems of aircraft, at operating temperatures between - 55 °° and 260 °C. It shall also be possible to mark these cables by hot stamp printing or ink jet printing. These markings shall be in accordance with EN 3838.
SIST EN 2714-009:2009 is classified under the following ICS (International Classification for Standards) categories: 49.060 - Aerospace electric equipment and systems. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 2714-009:2009 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Leitungen, elektrisch, ein- und mehradrig, für allgemeine Verwendung - Betriebstemperaturen zwischen - 55 °C und 260 °C - Teil 009: Geschirmt (Umseilung) und ummantelt, YAG X3 Laser bedruckbar - ProduktnormSérie aérospatiale - Câbles, électriques, mono et multiconducteurs d'usage général - Températures de fonctionnement comprises entre - 55 °C et 260 °C - Partie 009 : Blindés (guipés) et gainés, marquable au laser YAG X3 - Norme de produitAerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 009: Screened (spiral) and jacketed, YAG X3 laser printable - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 2714-009:2007SIST EN 2714-009:2009en,de01-junij-2009SIST EN 2714-009:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2714-009
November 2007 ICS 49.060 English Version
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 009: Screened (spiral) and jacketed, YAG X3 laser printable - Product standard
Série aérospatiale - Câbles, électriques, mono et multiconducteurs d'usage général - Températures de fonctionnement comprises entre - 55 °C et 260 °C - Partie 009 : Blindés (guipés) et gainés, marquable au laser YAG X3 - Norme de produit
Luft- und Raumfahrt - Leitungen, elektrisch, ein- und mehradrig, für allgemeine Verwendung - Betriebstemperaturen zwischen - 55 °C und 260 °C - Teil 009: Geschirmt (Umseilung) und ummantelt,YAG X3 Laser bedruckbar - Produktnorm This European Standard was approved by CEN on 27 April 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2714-009:2007: ESIST EN 2714-009:2009
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...