49.030.40 - Pins, nails

This standard specifies the characteristics, qualification and acceptance requirements for quick release pins, single and double acting for aerospace applications.
It is applicable whenever referenced.

This standard provides particulars of hole sizes and associated fitting conditions to suit locating pins EN 3150 and EN 3151 series.

This standard specifies the characteristics of steel EN 2573 split pins passivated, for use in aerospace applications at a maximum temperature of 600 °C.

This standard specifies the characteristics of close tolerance headed shear pins in steel: cadmium plated, for use in aerospace at temperatures below 235 °C.
These shear pins are intended for use as a connecting part in conjunction with collars EN 2365 and split pins EN 2367.

This standard specifies the characteristics of headless shoulder pins in NI-P100HT for aerospace applications. Note: Installation holes EN 3368

This standard specifies the requirements for close tolerance, headed, shear pins in alloy steel. It is applicable provided that it is referenced on the product standard or on the definition document.

This document specifies the dimensions, tolerances and the required characteristics of a quick release, self retaining, positive locking, double acting pin with button handle for aerospace application.

This document specifies the dimensions, tolerances and the required characteristics of a quick release, self retaining, positive locking, double acting pin with button handle for aerospace application.

This document specifies the characteristics of close tolerance pins, swage locking, 100° countersunk reduced head, shear type, in aluminium alloy 7050-T73 with chemical film, inch series, with a maximum operating temperature of 80 °C for aerospace application.