SIST EN ISO 18332:2008

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Metallic and other inorganic coatings - Definitions and conventions concerning porosity (ISO 18332:2007)Kovinske in druge anorganske prevleke - Definicije in dogovori v zvezi s poroznostjo (ISO 18332:2007)Revetements métalliques et autres revetements inorganiques - Définitions et principes concernant la porosité (ISO 18332:2007)Metallische und andere anorganische Überzüge - Definitionen und Festlegungen, die die Porigkeit betreffen (ISO 18332:2007)Ta slovenski standard je istoveten z:EN ISO 18332:2008SIST EN ISO 18332:2008en25.220.40ICS:SLOVENSKI
STANDARDSIST EN ISO 18332:200801-april-2008







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 18332January 2008ICS 25.220.40; 25.220.20Supersedes EN 13143:2003
English VersionMetallic and other inorganic coatings - Definitions andconventions concerning porosity (ISO 18332:2007)Revêtements métalliques et autres revêtementsinorganiques - Définitions et principes concernant laporosité (ISO 18332:2007)Metallische und andere anorganische Überzüge -Definitionen und Festlegungen, die die Porigkeit betreffen(ISO 18332:2007)This European Standard was approved by CEN on 29 December 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 18332:2008: E



EN ISO 18332:2008 (E)
2
Foreword
The text of ISO 18332:2007 has been prepared by Technical Committee ISO/TC 107 "Metallic and other inorganic coatings” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 18332:2008 by Technical Committee CEN/TC 262 "Metallic and other inorganic coatings", the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2008, and conflicting national standards shall be withdrawn at the latest by July 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13143:2003. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice
The text of ISO 18332:2007 has been approved by CEN as EN ISO 18332:2008 without any modifications.



INTERNATIONALSTANDARDISO18332First edition2007-02-01Reference numberISO18332:2007(E)© ISO2007Metallic and other inorganic coatings— Definitions and conventions concerning porosityRevêtements métalliques et autres revêtements inorganiques— Définitions et principes concernant la porosité



ISO18332:2007(E)ii© ISO2007–All rights reservedPDF disclaimerThis PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shallnot be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. Indownloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariataccepts no liability in this area.Adobe is a trademark of Adobe Systems Incorporated.Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creationparameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In theunlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.©ISO2007All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below orISO's member body in the country of the requester.ISO copyright officeCase postale 56  CH-1211 Geneva 20Tel.+ 41 22 749 01 11Fax+ 41 22 749 09 47E-mailcopyright@iso.orgWebwww.iso.orgPublished in Switzerland



ISO18332:2007(E)© ISO2007–All rights reservediiiForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies(ISO member bodies). The work of preparing International Standards is normally carried out through ISOtechnical committees. Each member body interested in a subject for which a technical committee has beenestablished has the right to be represented on that committee. International organizations, governmental andnon-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the InternationalElectrotechnical Commission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part2.The main task of technical committees is to prepare International Standards. Draft International Standardsadopted by the technical committees are circulated to the member bodi
...