iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST ENV 12282:1997

(Main)

Paper - Printing and business paper - Determination of edge dust

Paper - Printing and business paper - Determination of edge dust

This European Prestandard specifies the test method for measuring dust release from the edges of cut size papers.

Papier - Druck- und Büropapiere - Bestimmung des Schnittkantenstaubes

Diese Europäische Vornorm legt ein Prüfverfahren zur Messung des Schnittkantenstaubes von Formatpapieren fest.

Papier - Papier d'impression et de bureau - Détermination de la poussiere des bords

La présente prénorme européenne prescrit la méthode d'essai pour mesurer la poussière des bords de coupe des papiers en formats.

Papir - Tiskovni papir in papirji za poslovne namene - Določanje robne prašnosti

General Information

Status
Withdrawn
Publication Date
31-Aug-1997
Withdrawal Date
08-Mar-2016
ICS
85.080.10 - Office paper
Technical Committee
VPK - Pulp, paper, board and products
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
08-Mar-2016
Due Date
31-Mar-2016
Completion Date
09-Mar-2016
Ref Project
ENV 12282:1996 - Paper - Printing and business paper - Determination of edge dust

Buy Standard

ENV 12282:1997ENV 12282:1997
PreviousNext
Standard
ENV 12282:1997
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-1997
3DSLU7LVNRYQLSDSLULQSDSLUML]DSRVORYQHQDPHQH'RORþDQMHUREQHSUDãQRVWL
Paper - Printing and business paper - Determination of edge dust
Papier - Druck- und Büropapiere - Bestimmung des Schnittkantenstaubes
Papier - Papier d'impression et de bureau - Détermination de la poussiere des bords
Ta slovenski standard je istoveten z: ENV 12282:1996
ICS:
85.080.10 Pisarniški papir Office paper
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 216:2009(Main)
Writing paper and certain classes of printed matter - Trimmed sizes - A and B series, and indication of machine direction (ISO 216:2007)
EN ISO 216:2007

ISO 216:2007 specifies the trimmed sizes of writing paper and certain classes of printed matter.
It applies to trimmed sizes of paper for administrative, commercial and technical use, and also to certain classes of printed matter, such as forms, catalogues, etc.
It does not necessarily apply to newspapers, published books, posters or other special items which may be the subject of separate International Standards.
ISO 216:2007 also specifies the method for the indication of the machine direction for trimmed sheets.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12281:2003(Main)
Printing and business paper - Requirements for copy paper for dry toner imaging processes
EN 12281:2002

This European Standard specifies the performance requirements for uncoated cut-size paper for dry toner imaging processes (i.e. copy paper), in 80 g/m2 and in A4 format based on EN 20216. Other grammages and sizes of the ISO-A series are covered by this European standard, as long as the requirements specified in this European standard are fulfilled.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12283:2003(Main)
Printing and business paper - Determination of toner adhesion
EN 12283:2002

This European Standard specifies the determination of the adhesion of dry toner on paper sheets, printed with imaging machines such as copiers and printers. The chosen measuring range allows discrimination of toner adhesion around the level found with many common paper and machine combinations. Since divers imaging processes give different toner adhesion, the described method at constant IGT speed is not advised to compare degree of toner adhesion between different types of machines.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
kSIST FprEN ISO 9706:2025(Main)
Information and documentation - Paper for documents - Requirements for permanence (ISO/FDIS 9706:2025)
FprEN ISO 9706

Specifies the requirements for permanent paper intended for documents given in terms of minimum strength measured by a tear test, minimum content of substance (such as calcium carbonate) that neutralize acid action measured by the alkali reserve, maximum content of easily oxidized material measured by the kappa number, maximum and minimum pH values of a cold water extract of the paper. Is applicable to unprinted papers. Is not applicable to boards.

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 17217:2025(Main)
Postal services - Reverse envelope - Design and printing requirements
CEN/TS 17217:2024

This document covers physical properties and manufacturing requirements for envelopes having an address window and the flap on the front side once the flap has been sealed, hereafter the flap side. It covers the main design features of the reverse envelope, notably of the flap and address window, and the materials used for the manufacturing thereof. It applies to reverse envelopes with advertising or communication printed on the plain side, eventually on its entire surface.
This document covers empty envelopes, but also finished mailpieces that have been properly inserted, addressed and franked (reverse mailpieces) and are submitted to Postal Operators. In particular, reverse mailpieces will be compliant with relevant Postal standards applicable in the member states.
By extension, these requirements also apply to non-window envelopes used for reverse mailpieces and having the address printed on the flap side.
This document does not apply to:
-   envelopes with a large window on the plain side (opposite to the flap) as these are already common and widely accepted,
-   paper requirements to ensure print quality (except for the postage mark and address) and notably colour rendering.

  • Technical specification
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 216:2009(Main)
Writing paper and certain classes of printed matter - Trimmed sizes - A and B series, and indication of machine direction (ISO 216:2007)
EN ISO 216:2007

ISO 216:2007 specifies the trimmed sizes of writing paper and certain classes of printed matter.
It applies to trimmed sizes of paper for administrative, commercial and technical use, and also to certain classes of printed matter, such as forms, catalogues, etc.
It does not necessarily apply to newspapers, published books, posters or other special items which may be the subject of separate International Standards.
ISO 216:2007 also specifies the method for the indication of the machine direction for trimmed sheets.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12281:2003(Main)
Printing and business paper - Requirements for copy paper for dry toner imaging processes
EN 12281:2002

This European Standard specifies the performance requirements for uncoated cut-size paper for dry toner imaging processes (i.e. copy paper), in 80 g/m2 and in A4 format based on EN 20216. Other grammages and sizes of the ISO-A series are covered by this European standard, as long as the requirements specified in this European standard are fulfilled.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12283:2003(Main)
Printing and business paper - Determination of toner adhesion
EN 12283:2002

This European Standard specifies the determination of the adhesion of dry toner on paper sheets, printed with imaging machines such as copiers and printers. The chosen measuring range allows discrimination of toner adhesion around the level found with many common paper and machine combinations. Since divers imaging processes give different toner adhesion, the described method at constant IGT speed is not advised to compare degree of toner adhesion between different types of machines.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
kSIST FprEN ISO 9706:2025(Main)
Information and documentation - Paper for documents - Requirements for permanence (ISO/FDIS 9706:2025)
FprEN ISO 9706

Specifies the requirements for permanent paper intended for documents given in terms of minimum strength measured by a tear test, minimum content of substance (such as calcium carbonate) that neutralize acid action measured by the alkali reserve, maximum content of easily oxidized material measured by the kappa number, maximum and minimum pH values of a cold water extract of the paper. Is applicable to unprinted papers. Is not applicable to boards.

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 488-2:2025(Main)
District heating and district cooling pipes - Bonded pipe systems for directly buried hot and cold water networks - Factory made steel valve assembly for draining and venting, polyurethane thermal insulation and a casing of polyethylene
EN 488-2:2025

This document specifies requirements for factory made thermally insulated bonded steel service valve assemblies for filling, draining, venting and operation purposes for directly buried hot and cold water networks in accordance with EN 13941-1, comprising a steel service valve, steel service pipe, polyurethane (PUR) foam thermal insulation and a casing of polyethylene (PE).
This document applies of steel service valve assemblies with an internal pressure of maximum 2,5 MPa.
The principles of this document can be applied to thermal insulated bonded steel service valve assemblies with internal pressures higher than 2,5 MPa, provided that special attention is paid to the effects of pressure.
The steel service valve assembly can also include the following additional elements: measuring wires, spacers, and diffusion barriers.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day