SIST EN 13892-6:2003
(Main)Methods of test for screed materials - Part 6: Determination of surface hardness
Methods of test for screed materials - Part 6: Determination of surface hardness
This European standard specifies a method for determining the surface hardness of moulded mortar specimens made from magnesite screed material or from cementitious screed-, calcium sulfate screed-, and synthetic resin screed material with fine aggregates (
Prüfverfahren für Estrichmörtel und Estrichmassen - Teil 6: Bestimmung der Oberflächenhärte
Diese Europäische Norm legt ein Verfahren zur Bestimmung der Oberflächenhärte von geformten Mörtel-Prüf-körpern aus Magnesiaestrichmörtel oder aus Zementestrich-, Calciumsulfatestrich- und Kunstharzestrichmörteln fest. Dieses Verfahren ist nur für Estrichmörtel und -massen mit Zuschlägen geeignet, deren Korngröße weniger als 4 mm beträgt.
Méthodes d'essai des matériaux pour chapes - Partie 6: Détermination de la dureté superficielle
La présente Norme européenne spécifie une méthode permettant de déterminer la dureté de surface sur des éprouvettes de mortier moulées, confectionnées avec des matériaux pour chapes a base de magnésie ou avec des matériaux pour chapes a base de ciment, de sulfate de calcium, de magnésie ou de résine synthétique. Cette méthode ne convient que pour les matériaux pour chapes qui contiennent des agrégats de moins de 4 mm.
Metode preskušanja za mešanice za estrih – 6. del: Določevanje trdote površine
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Prüfverfahren für Estrichmörtel und Estrichmassen - Teil 6: Bestimmung der OberflächenhärteMéthodes d'essai des matériaux pour chapes - Partie 6: Détermination de la dureté superficielleMethods of test for screed materials - Part 6: Determination of surface hardness91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. MortarICS:Ta slovenski standard je istoveten z:EN 13892-6:2002SIST EN 13892-6:2003en01-september-2003SIST EN 13892-6:2003SLOVENSKI
STANDARD
SIST EN 13892-6:2003
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13892-6November 2002ICS 91.100.10English versionMethods of test for screed materials - Part 6: Determination ofsurface hardnessMéthodes d'essai des matériaux pour chapes - Partie 6:Détermination de la dureté superficiellePrüfverfahren für Estrichmörtel und Estrichmassen - Teil 6:Bestimmung der OberflächenhärteThis European Standard was approved by CEN on 9 October 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13892-6:2002 ESIST EN 13892-6:2003
EN 13892-6:2002 (E)2ContentspageForeword.31Scope.42Normative references.43Principle.44Symbols and abbreviations.45Apparatus.46Procedure.57Test report.5Bibliography.7SIST EN 13892-6:2003
EN 13892-6:2002 (E)3ForewordThis document (EN 13892-6:2002) has been prepared by Technical Committee CEN/TC 303, "Floor screeds andin-situ floorings in buildings", the secretariat of which is held by DIN.It was prepared by Working Group 2 ”Screed materials and floor screeds -Test-methods“ taking into account theproposals submitted by Working Group 1 ”Screed materials and floor screeds - Definitions, properties and re-quirements“.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by May 2003, and conflicting national standards shall be withdrawn at the latest byMay 2003.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.SIST EN 13892-6:2003
EN 13892-6:2002 (E)41 ScopeThis European standard specifies a method for determining the surface hard
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.