iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST-TP CEN/TR 16395:2024

(Main)

Gas Infrastructure - CEN/TC 234 Pressure Definitions - Guideline Document

Gas Infrastructure - CEN/TC 234 Pressure Definitions - Guideline Document

This Technical Report gives explanation on the pressure definitions and pressure units used by the gas network operators with regard to the standards of CEN/TC 234 “Gas infrastructure” listed in Clause 2.
The European Standards of CEN/TC 234 comprise the functional requirements in the field of gas infrastructure from the input of gas into the on-shore transmission network up to the inlet connection of gas appliances, including transmission, distribution, storage, compression, pressure regulation and metering, installation, injection of (renewable) gases such as biomethane, hydrogen, gas quality issues and others.

Gasinfrastruktur - CEN/TC 234 Druckdefinitionen - Leitliniendokument

Dieses Dokument gibt eine Erklärung der Druckdefinitionen, die die Gasnetzbetreiber in Hinblick auf die Normen des CEN/TC 234 „Gasinfrastruktur“ anwenden.
Die europäischen Normen des CEN/TC 234 sind anwendbar für den Bereich der leitungsgebundenen Gasinfrastruktur für gasförmige Energieträger und deren Mischungen von der Einspeisung in das landseitige Fernleitungsnetz bis zum Eingangsanschluss von Gasverbrauchsgeräten; dies umfasst die zugehörigen funktionalen Anforderungen an Einspeisung, Transport, Verdichtung, Druckregelung, Speicherung, Mischung, Gasaufbereitung, Odorierung, Verteilung, Messung und zugehörige Installationsleitungen sowie zugehörige Anforderungen wie Sicherheit, Gasqualität, Nachhaltigkeit, Umwelt und Emissionen.
Im Zuständigkeitsbereich des CEN/TC 234 sind gasförmige Energieträger und deren Gemische Gase, die sich bei der Beförderung in der Gasleitungsinfrastruktur in gasförmigem Zustand befinden, wie Wasserstoff, wasserstoffreiche und methanreiche Gase, Dimethylether (DME) sowie Propan und Butane, die zur Verbrennung und/oder als Rohstoff verwendet werden, mit Ausnahme von Dampf und Druckluft.

Infrastructures gazières - Définitions des pressions du CEN/TC 234 - Lignes directrices

Le présent Rapport technique donne des explications sur les définitions de pression utilisées par les opérateurs de réseau de gaz à l'égard des normes du CEN/TC 234 "Infrastructures gazières".
Les Normes européennes du CEN/TC 234 comprennent les exigences fonctionnelles dans le domaine des infrastructures gazières depuis l'entrée du gaz dans le réseau de transport terrestre jusqu’à la connexion d'entrée des appareils à gaz. Cela comprend les exigences fonctionnelles connexes pour l'injection, le transport, la compression, le contrôle de la pression, le stockage, le mélange, le traitement du gaz, l'odorisation, la distribution, la mesure et les tuyauteries d'installation associées, ainsi que les exigences connexes telles que la sécurité, la qualité du gaz, la durabilité, l'environnement et les émissions.
Dans le domaine d’application du CEN/TC 234, les vecteurs énergétiques gazeux et les mélanges décrivent les gaz qui sont à l'état gazeux lorsqu'ils sont transportés dans l'infrastructure des canalisations, tels que l'hydrogène, les gaz riches en hydrogène et en méthane, l'éther diméthylique (DME) et le propane et les butanes. utilisé pour la combustion et/ou comme matière première, à l'exclusion de la vapeur et de l'air comprimé.

Infrastruktura za plin - Definicije tlaka, ki se uporabljajo v CEN/TC 234 - Smernice

To tehnično poročilo pojasnjuje opredelitve tlaka in tlačnih enot, ki jih uporabljajo upravljavci plinskega omrežja v zvezi s standardi odbora CEN/TC 234 »Infrastruktura za plin«, navedenimi v točki 2.
Evropski standardi odbora CEN/TC 234 zajemajo funkcionalne zahteve na področju infrastrukture za plin od vnosa plina v kopensko prenosno omrežje do dovodnega priključka plinskih naprav, vključno s prenosom, distribucijo, skladiščenjem, kompresijo, uravnavanjem in merjenjem tlaka, namestitvijo, vnosom plinov iz (obnovljivih) virov, kot so biometan, vodika, vprašanji kakovosti plina itd.

General Information

Status
Published
Public Enquiry End Date
02-Oct-2023
Publication Date
19-Dec-2023
ICS
91.140.40 - Gas supply systems
Technical Committee
DPL - Gas supply
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
16-Nov-2023
Due Date
21-Jan-2024
Completion Date
20-Dec-2023
Ref Project
CEN/TR 16395:2023 - Gas Infrastructure - CEN/TC 234 Pressure Definitions - Guideline Document

Relations

Replaced By
SIST-TP CEN/TR 16395:2013 - Gas Infrastructure - CEN/TC 234 Pressure Definitions - Guideline Document
Effective Date
01-Feb-2024

Buy Standard

TP CEN/TR 16395:2024TP CEN/TR 16395:2024
PreviousNext
Technical report
TP CEN/TR 16395:2024
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CEN/TR 16395:2024
01-februar-2024
Infrastruktura za plin - Definicije tlaka, ki se uporabljajo v CEN/TC 234 - Smernice
Gas Infrastructure - CEN/TC 234 Pressure Definitions - Guideline Document
Gasinfrastruktur - CEN/TC 234 Druckdefinitionen - Leitliniendokument
Infrastructures gazières - Définitions des pressions du CEN/TC 234 - Lignes directrices
Ta slovenski standard je istoveten z: CEN/TR 16395:2023
ICS:
91.140.40 Sistemi za oskrbo s plinom Gas supply systems
SIST-TP CEN/TR 16395:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST-TP CEN/TR 16395:2024

---------------------- Page: 2 ----------------------
SIST-TP CEN/TR 16395:2024


CEN/TR 16395
TECHNICAL REPORT

RAPPORT TECHNIQUE

November 2023
TECHNISCHER REPORT
ICS 91.140.40 Supersedes CEN/TR 16395:2012
English Version

Gas Infrastructure - CEN/TC 234 Pressure Definitions -
Guideline Document
Infrastructures gazières - Définitions des pressions du Gasinfrastruktur - CEN/TC 234 Druckdefinitionen -
CEN/TC 234 - Lignes directrices Leitliniendokument


This Technical Report was approved by CEN on 13 November 2023. It has been drawn up by the Technical Committee CEN/TC
234.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 16395:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST-TP CEN/TR 16395:2024
CEN/TR 16395:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
3.1 Key pressure definitions used in CEN/TC 234 standards . 6
3.2 Derived pressure definitions used in CEN/TC 234 standards . 7
3.3 Commonly used pressure definitions in European product standards . 7
4 Explanation of Gas pressure definitions for gas transport and distribution systems . 8
4.1 General. 8
4.2 Pressure demarcation . 8
4.3 Operating conditions . 9
4.3.1 Normal operating conditions. 9
4.3.2 Gas pressure under incidental operating conditions . 9
4.4 Design pressure . 10
4.5 Test pressures . 10
4.6 Equipment in the scope of the European Pressure Equipment Directive . 10
5 Relationships between MOP, TOP and MIP and test pressures . 11
6 Pressure units in CEN/TC 234 European Standards . 11
Annex A (informative) Examples of relationships between pressure designations . 12
Annex B (informative) Industrial installations according to EN 15001 [16], [18] . 14
Bibliography .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 15001-2:2023(Main)
Gas supply systems - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance
EN 15001-2:2023

This European Standard specifies detailed functional requirements for the commissioning, operation and maintenance of
•   industrial gas installations and assemblies with an operating pressure greater than 0,5 bar and of
•   non-industrial installations (residential and commercial) with an operating pressure greater than 5 bar,
starting from the outlet of the network operator’s point of delivery up to the inlet connection to the gas appliance; normally the inlet isolation valve. This European Standard also covers the inlet connection to the gas appliance comprising of the pipework that does not fall within the scope of the appliance standard.
This standard applies to gas installations operating at ambient temperatures between –20 °C and 40 °C and operating pressures up to and including 60 bar. For operating conditions outside these limitations, reference should additionally be made to EN 13480 for metallic pipework.
For industrial gas installations up to and including 0,5 bar and for non-industrial (residential and commercial) gas installations up to and including 5 bar EN 1775 applies.
For gas installations that do not fall within the scope of EN 1775 or other European Standards, this European Standard applies.
In this European Standard, the term “gas“ refers to combustible gases, which are gaseous at 15 °C and 1 013 mbar absolute atmospheric pressure. These gases are commonly referred to as manufactured gas, natural gas or Liquefied Petroleum Gas (LPG). They are also referred to as first, second or third family gases (see table 1 of EN 437:2003).
LPG storage vessels (including all ancillaries fitted directly to storage vessels) are excluded. Also excluded are LPG installations and sections of LPG installations operating at vapour pressure (e.g. between the storage vessel and its pressure regulator).
In this European Standard, all pressures are gauge pressures unless otherwise stated.
For gas installations within the scope of this standard, national legisl

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15001-1:2023(Main)
Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
EN 15001-1:2023

This standard specifies detailed functional requirements for the design, selection of materials, construction, inspection and testing of industrial gas installation pipework and assemblies with an operating pressure greater than 0,5 bar, and non industrial gas installation pipework (residential and commercial) with an operating pressure greater than 5 bar in buildings, starting from the outlet of the network operator’s point of delivery up to the inlet connection to the gas appliance; normally the inlet isolation valve. This standard also covers the inlet connection to the gas appliance comprising of the pipework that does not fall within the scope of the appliance standard.
NOTE   The use of the term installation and pipework is interchangeable.
This standard applies to gas installations operating at ambient temperatures between - 20 °C and 40 °C and operating pressures up to and including 60 bar. For operating conditions outside these limitations, reference should additionally be made to EN 13480 for metallic pipework.
For industrial gas installations up to and including 0,5 bar and for non industrial (residential and commercial) gas installations up to and including 5 bar in buildings, EN 1775 applies.
For gas installations that do not fall within the scope of EN 1775 or other European Standards, this standard applies.
In this standard, the term “gas“ refers to combustible gases, which are gaseous at 15 °C and 1 013 mbar absolute atmospheric pressure (normal conditions). These gases are commonly referred to as manufactured gas, natural gas or Liquefied Petroleum Gas (LPG). They are also referred to as first, second or third family gases (see Table 1 of EN 437:2003). The given values are considered as normal conditions for all volumes given in this standard.

  • Standard
    131 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17649:2022(Main)
Gas infrastructure - Safety Management System (SMS) and Pipeline Integrity Managementsystem (PIMS) - Functional requirements
EN 17649:2022

This document specifies requirements on the development and implementation of a safety management system for operators of gas transmission and/or distribution infrastructure.
This document refers to all activities and processes related to safety aspects and performed by operators of a gas network, including those activities entrusted to contractors. It includes safety-related provisions on operation of the gas network.
The described safety management system is applicable to infrastructure for the transmission and distribution of processed, non-toxic and non-corrosive gas of the 2nd gas family as classified in EN 437 , including injected gases.
NOTE 1 Injected gases can be bio methane, hydrogen, synthetic gases and others.
This document can also apply for gas infrastructure conveying only other gases such as bio methane, hydrogen, syntactic gases or gases of the 3rd family as classified in EN 437.
Specific requirements for either transmission or distribution can be found in de specific parts for transmission and distribution.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17526:2022(Main)
Gas meters - Thermal-mass flow-meter based gas meter
EN 17526:2021

This European Standard specifies requirements and tests for the construction, performance and safety of class 1,5 Capillary Thermal-Mass Flow sensor gas meters (hereinafter referred to as meter(s)). This applies to meters having co-axial single pipe, or two pipe connections, that are used to measure volumes of fuel gases, which are within the limits of the test gases of the 2nd and/or 3rd family according to EN 437.  
These meters have a maximum working pressures not exceeding 0,5 bar and a maximum flowrate not exceeding 160 m3.h−1 over a minimum ambient temperature range of −10 °C to +40 °C and a gas temperature range as specified by the manufacturer with a minimum range of 40 K.

  • Standard
    82 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12405-1:2022(Main)
Gas meters - Conversion devices - Part 1: Volume conversion
EN 12405-1:2021

This document specifies the requirements and tests for the construction, performance, safety and conformity of gas volume electronic conversion devices associated to gas meters, used to measure volumes of fuel gases of the 1st and 2nd families according to EN 437.
This document is intended for type testing, the detailed relevant provisions of which are given in Annex A.
Only three kinds of conversion are treated in this document:
-   conversion as a function of temperature only (called T conversion);
-   conversion as a function of the pressure and of the temperature with constant compression factor (called PT conversion);
-   conversion as a function of the pressure, the temperature and taking into account the compression factor (called PTZ conversion).
This document is not relevant to temperature conversion integrated into gas meters which only indicate the converted volume.
EN 12405-2 applies for energy conversion.
Gas-volume conversion devices consist of a calculator and a temperature transducer or a calculator, a temperature transducer and a pressure transducer locally installed.
For application of this document, a conversion device may be, as a choice of the manufacturer, considered as a complete instrument (Type 1) or made of separate elements (Type 2), according to the definitions given in 3.1.18.1 and 3.1.18.2.
In this last case, the provisions concerning pressure transducers, temperature sensors and temperature transducers are given in Annexes B, C and D respectively.
Any conversion device can provide an error curve correction for a gas meter.
NOTE   When rendering an account to an end user the readings from the conversion device can be used in conjunction with the readings from a gas meter conforming to EN 1359, EN 12480, or EN 12261, as appropriate, or to any other appropriate and relevant international or national standard for gas meters, without prejudice of national regulations.

  • Standard
    122 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12732:2022(Main)
Gas infrastructure - Welding steel pipework - Functional requirements
EN 12732:2021

This European Standard contains requirements for the production and testing of weld joints for the installation and modification of onshore steel pipelines and pipework used in gas infrastructure, including in-service pipelines, for all pressure ranges for the carriage of processed, non-toxic and non-corrosive natural gas according to EN ISO 13686 and for the carriage of non-conventional gases
such as injected biomethane including hydrogen,  
where
- the pipeline elements are made of unalloyed or low-alloyed carbon steel;
- the pipeline is not located within commercial or industrial premises as integral part of the industrial process on those premises except for any pipelines and facilities delivering gas to such premises;
- the pipework is not located within household installations according to EN 1775;
- the design temperature of the system is between -40 °C up to and including 120 °C.
The onshore steel pipelines and pipework used in gas infrastructure include in-service pipelines, for all pressure ranges for the carriage of processed, non-toxic and non-corrosive natural gas according to EN ISO 13686 and for the carriage of non-conventional gases complying with EN ISO 13686, and for which a detailed technical evaluation of the functional requirements (such as injected biomethane, hydrogen) is performed ensuring there are no other constituents or properties of the gases that can affect the integrity of the pipeline.
This standard is not applicable to welds produced prior to the publication of this European Standard.
Table 1 assigns the application areas to quality requirement categories as a function of the working pressure and pipe materials used.  
Additional requirements may be specified when, for example:
- the strain on pipelines and systems,
- the materials,
- the line routing,
- the design or the welding technique
are considered critical.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 12007-6:2021(Main)
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 6: Specific functional recommendations for unplasticized polyamide (PA-U)
CEN/TS 12007-6:2021

This Technical Specification describes specific functional recommendations for the safe
design, handling, installation and operation of unplasticized polyamide (PA-U) gas piping
systems with fusion jointing and mechanical jointing with
a)  a maximum operating pressure (MOP) up to and including 16 bar;
b)  an operating temperature between -20 °C and +40 °C.
This Technical Specification covers PA pipes single layer solid wall.
This Technical Specification should be applied complementary to the functional requirements
in EN 12007-2.

  • Technical specification
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14236:2018(Main)
Ultrasonic domestic gas meters
EN 14236:2018

To revise the Annex ZA, and the associated body text only, of EN 14236 to ensure the alignment with the Directive 2014/32/EU.

  • Standard
    79 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12261:2018(Main)
Gas meters - Turbine gas meters
EN 12261:2018

This document specifies the measuring conditions, requirements and tests for the construction,
performance and safety of class 1,0 axial and radial turbine gas meters with mechanical indicating
devices, herein after referred to as a meter(s), having in-line pipe connections for gas flow
measurement.
This document applies to turbine gas meters used to measure the volume of fuel gases of the 1st
and 2nd gas families, the composition of which is specified in EN 437, at maximum working
pressures up to 420 bar, actual flow rates up to 25 000 m3/h over a gas temperature range of at
least 40 K and for a climatic environmental temperature range of at least 50 K.
This document applies to meters that are installed in locations with vibration and shocks of low
significance and in
— closed locations (indoor or outdoor with protection as specified by the manufacturer) with
condensing or with non-condensing humidity
or, if specified by the manufacturer,
— open locations (outdoor without any covering) with condensing humidity or with noncondensing
humidity
and in locations with electromagnetic disturbances.
Unless otherwise specified in this document:
— all pressures used are gauge;
— all influence quantities, except the one under test, are kept relatively constant at their
reference value.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12480:2018(Main)
Gas meters - Rotary displacement gas meters
EN 12480:2018

This European Standard specifies ranges, construction, performances, output characteristics and testing of rotary displacement gas meters (hereinafter referred to as RD meters or simply meters) for gas volume measurement.
This European Standard applies to rotary displacement gas meters used to measure the volume of fuel gases of at least the 1st, 2nd and 3rd gas families, the composition of which is specified in EN 437:2003+A1:2009, at a maximum working pressure up to and including 20 bar over an ambient and gas temperature range of at least −10 °C to +40 °C.
This European Standard applies to meters that are installed in locations with vibration and shocks of low significance (class M1) and in
-   closed locations (indoor or outdoor with protection as specified by the manufacturer) with condensing or with non-condensing humidity
or, if specified by the manufacturer,
-   open locations (outdoor without any covering) with condensing humidity or with non-condensing humidity,
and in locations with electromagnetic disturbances (class E1 and E2). The standards apply to mechanical meters with mechanical index, electronic devices are not covered by this standard.
Unless otherwise specified in this standard:
-   all pressures used are gauge;
-   all influence quantities, except the one under test, are kept relatively constant at their reference value.
This European Standard applies to meters with a maximum allowable pressure PS and the volume V of less than 6 000 bar · litres or with a product of PS and DN of less than 3 000 bar.
This European Standard can be used for both pattern approval and individual meter testing. Cross-reference tables are given in:
-   Annex A for the tests that need to be undertaken for pattern approval;
-   Annex B for individual meter testing.
Some parts of this standard cover meters with mechanical index only.
The risk philosophy adopted in this standard is based on the analysis of hazards including pressure. The standard applies principles to eliminate or reduce hazards. Where these hazards cannot be eliminated appropriate protection measures are specified.

  • Standard
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day