SIST EN 14596:2018
(Main)Tanks for transport of dangerous goods - Service equipment for tanks - Emergency pressure relief valve
Tanks for transport of dangerous goods - Service equipment for tanks - Emergency pressure relief valve
This document covers the emergency pressure relief valve.
It specifies the performance requirements and the critical dimensions of the emergency pressure relief valve. It also specifies the tests necessary to verify the compliance of the equipment with this document.
The service equipment specified by this document is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR [2] which have a vapour pressure not exceeding 110 kPa at 50 oC and petrol, and which have no sub-classification as toxic or corrosive.
Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - Notentlastungsventil
Dieses Dokument behandelt das Notentlastungsventil.
Dieses Dokument legt die Leistungsanforderungen und die entscheidenden Maße des Notentlastungsventils fest. Es sind außerdem die Prüfungen festgelegt, um die Übereinstimmung der Ausrüstung mit den Anforderungen dieses Dokuments zu bestätigen.
Die in diesem Dokument beschriebene Bedienungsausrüstung ist für flüssige Erdölerzeugnisse und andere gefährliche Güter der Klasse 3 des ADR [2] geeignet, deren Dampfdruck bei 50 °C max. 110 kPa beträgt (einschließlich Ottokraftstoff), und die nicht als giftig oder ätzend eingestuft sind.
Citernes destinées au transport de matières dangereuses - Equipements de service pour citernes - Clapet de surpression accidentelle
Le présent document s’applique aux clapets de surpression accidentelle.
Il spécifie les exigences de performances et les dimensions critiques des clapets de surpression accidentelles. Il spécifie également les essais nécessaires pour vérifier la conformité de l’équipement au présent document.
L’équipement de service spécifié dans le présent document convient à une utilisation avec des produits pétroliers liquides et autres matières dangereuses de la classe 3 de l’ADR [2] dont la tension de vapeur ne dépasse pas 110 kPa à 50 °C (y compris l’essence) et qui n’appartiennent à aucune sous-classification des produits toxiques ou corrosifs.
Cisterne za prevoz nevarnega blaga - Oprema za obratovanje cistern - Ventil za razbremenitev tlaka v sili
Ta dokument obravnava ventil za razbremenitev tlaka v sili.
Določa zahteve glede zmogljivosti in kritične mere ventila za razbremenitev tlaka v sili. Določa tudi preskuse, potrebne za preverjanje skladnosti opreme s tem dokumentom.
Oprema, opredeljena v tem dokumentu, je primerna za uporabo s tekočimi naftnimi proizvodi in drugimi nevarnimi snovmi kategorije 3 ADR [2], katerih parni tlak ne presega 110 kPa pri 50 °C, ter z motornim bencinom, pri čemer niso dodatno opredeljeni kot strupeni ali korozivni.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cisterne za prevoz nevarnega blaga - Oprema za obratovanje cistern - Ventil za razbremenitev tlaka v siliTanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - NotentlastungsventilCiternes destinées au transport de matières dangereuses - Equipements de service pour citernes - Clapet de surpression accidentelleTanks for transport of dangerous goods - Service equipment for tanks - Emergency pressure relief valve23.060.40Pressure regulators23.020.20Posode in vsebniki, montirani na vozilaVessels and containers mounted on vehicles13.300Varstvo pred nevarnimi izdelkiProtection against dangerous goodsICS:Ta slovenski standard je istoveten z:EN 14596:2018SIST EN 14596:2018en,fr,de01-november-2018SIST EN 14596:2018SLOVENSKI
STANDARDSIST EN 14596:20051DGRPHãþD
SIST EN 14596:2018
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14596
August
t r s z ICS
s uä u r râ
t uä r t rä t râ
t uä r x rä v r Supersedes EN
s v w { xã t r r wEnglish Version
Tanks for transport of dangerous goods æ Service equipment for tanks æ Emergency pressure relief valve Citernes destinées au transport de matières dangereuses æ Équipements de service pour citernes æ Clapet de surpression accidentelle
Tanks für die Beförderung gefährlicher Güter æ Bedienungsausrüstung von Tanks æ Notentlastungsventil This European Standard was approved by CEN on
t u April
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
9
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s v w { xã t r s z ESIST EN 14596:2018
EN 14596:2018 (E) 2 Contents Page European foreword . 3 Introduction . 5 1 Scope. 6 2 Normative references . 6 3 Terms and definitions . 6 4 Functions . 6 5 Design characteristics . 7 5.1 Relieving pressure . 7 5.2 Weather protection . 7 5.3 Drop test . 7 5.4 Vapour venting performance. 7 5.5 Temperature range . 7 5.6 Materials of construction . 7 5.7 Dimensional characteristics . 7 5.8 Electrical resistance . 7 5.9 Optional function . 8 6 Tests. 8 6.1 General . 8 6.2 Production tests . 8 6.3 Type tests . 9 7 Marking . 11 8 Installation, operating and maintenance instructions. 11 Annex A (normative)
Drop test apparatus . 12 Annex B (informative)
Minimum vapour venting capacity for fire engulfment relief . 13 Bibliography . 14 SIST EN 14596:2018
EN 14596:2018 (E) 3 European foreword This document (EN 14596:2018) has been prepared by Technical Committee CEN/TC 296 “Tanks for transport of dangerous goods”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2019, and conflicting national standards shall be withdrawn at the latest by February 2019. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14596:2005. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. This edition of EN 14596 has the following significant changes from the earlier standard: — Introduction and relieving pressure changed to reflect the change in ADR tank classification from low pressure tanks to gravity discharge tanks; — a note regarding weather protection; — a vapour venting performance test has been added; — the keeping period for test results clarified; — drop test rig, (Annex A), dimensions of sand boxes improved; — venting capacity table moved to new annex (Annex B) and made informative. This document forms part of a coherent standards programme (i.e. Tanks for transport of liquid dangerous goods with vapour pressure not exceeding 110 kPa (absolute pressure) at 50° C and petrol - Service equipment). This standards programme comprises the following standards: EN 13081, Tanks for transport of dangerous goods – Service equipment for tanks – Vapour collection adaptor and coupler EN 13082, Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve. EN 13083, Tanks for transport of dangerous goods - Service equipment for tanks – Adaptor for bottom loading and unloading. EN 13308, Tanks for transport of dangerous goods - Service equipment for tanks - Non-pressure balanced footvalve. EN 13314, Tanks for transport of dangerous goods - Service equipment for tanks - Fill hole cover. SIST EN 14596:2018
EN 14596:2018 (E) 4 EN 13315, Tanks for transport of dangerous goods - Service equipment for tanks - Gravity discharge coupler.
EN 13316, Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve. EN 13317, Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly. EN 14595, Tanks for transport of dangerous goods - Service equipment – Breather device. EN 14596, Tanks for transport of dangerous goods - Service equipment for tanks - Emergency pressure relief valve EN 16249, Tanks for transport of dangerous goods – Service equipment – Cap for the adaptor for bottom loading and unloading EN 16257, Tanks for transport of dangerous goods – Service equipment – Footvalve sizes other than 100 mm dia. (nom) EN 16522, Tanks for transport of dangerous goods – Service equipment for tanks – Flame arresters for breather devices According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 14596:2018
EN 14596:2018 (E) 5 Introduction An emergency pressure relief valve allows venting from a tank compartment during excess pressure. The emergency pressure relief valve may, in addition, perform the closing and opening functions of a fill hole cover, as specified in EN 13314 [1]. The emergency pressure relief valve is fitted to gravity discharge tanks and should not be considered as a pressure tank safety valve as defined in ADR [2]. The function of the emergency pressure relief valve may also be performed by the fill hole cover in accordance with EN 13314. SIST EN 14596:2018
EN 14596:2018 (E) 6 1 Scope This document covers the emergency pressure relief valve. It specifies the performance requirements and the critical dimensions of the emergency pressure relief valve. It also specifies the tests necessary to verify the compliance of the equipment with this document. The service equipment specified by this document is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR [2] which have a vapour pressure not exceeding 110 kPa at 50 °C and petrol, and which have no sub-classification as toxic or corrosive. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12266-1:2012, Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements EN 12266-2:2012, Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements EN 14564, Tanks for transport of dangerous goods - Terminology ISO 2859-1, Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 145
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.