iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60315-7:1999

(Main)

Methods of measurement on radio receivers for various classes of emission -- Part 7: Methods of measurement on digital satellite radio (DSR) receivers

Methods of measurement on radio receivers for various classes of emission -- Part 7: Methods of measurement on digital satellite radio (DSR) receivers

EN following parallel vote

Meßverfahren für Funkempfänger für verschiedene Sendearten -- Teil 7: Meßverfahren für Empfänger für digitale Satelliten-Tonrundfunksendungen (DSR)

Méthodes de mesure applicables aux récepteurs radioélectriques pour diverses classes d'émission -- Partie 7: Méthodes de mesure pour les récepteurs de radiodiffusion sonore numérique par satellite (DSR)

Methods of measurement on radio receivers for various classes of emission -- Part 7: Methods of measurement on digital satellite radio (DSR) receivers (IEC 60315-7:1995)

General Information

Status
Withdrawn
Publication Date
31-Mar-1999
Withdrawal Date
15-Aug-2024
ICS
33.070.40 - Satellite
33.160.20 - Radio receivers
Technical Committee
AVM - Audio, video and multimedia systems and equipment
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
13-Aug-2024
Due Date
05-Sep-2024
Completion Date
16-Aug-2024
Ref Project
EN 60315-7:1995 - Methods of measurement on radio receivers for various classes of emission - Part 7: Methods of measurement on digital satellite radio (DSR) receivers

Buy Standard

EN 60315-7:1999EN 60315-7:1999
PreviousNext
Standard
EN 60315-7:1999
English language
46 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-1999
Methods of measurement on radio receivers for various classes of emission -- Part
7: Methods of measurement on digital satellite radio (DSR) receivers (IEC 60315-
7:1995)
Methods of measurement on radio receivers for various classes of emission -- Part 7:
Methods of measurement on digital satellite radio (DSR) receivers
Meßverfahren für Funkempfänger für verschiedene Sendearten -- Teil 7: Meßverfahren
für Empfänger für digitale Satelliten-Tonrundfunksendungen (DSR)
Méthodes de mesure applicables aux récepteurs radioélectriques pour diverses classes
d'émission -- Partie 7: Méthodes de mesure pour les récepteurs de radiodiffusion sonore
numérique par satellite (DSR)
Ta slovenski standard je istoveten z: EN 60315-7:1995
ICS:
33.070.40 Satelit Satellite
33.160.20 Radijski sprejemniki Radio receivers
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- P
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 19152-3:2024(Main)
Geographic information - Land Administration Domain Model (LADM) - Part 3: Marine georegulation (ISO 19152-3:2024)
EN ISO 19152-3:2024

This part of ISO 19152 provides the concepts and structure for standardization for georegulation in the marine space.
This standard addresses the information structures related to management of legal spaces, such as the international maritime limits and boundaries, marine living and non-living resources management areas, marine conservation areas, etc. and their related rights and obligations.
This part of 19152 establishes the common elements and basic schema to structure marine georegulation information system. It builds upon the common components defined in 19152 Part 1 – Fundamentals.

  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18563-3:2024(Main)
Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 3: Complete systems (ISO 18563-3:2024)
EN ISO 18563-3:2024

ISO 18563-3:2015 addresses ultrasonic test systems implementing linear phased array probes, in contact (with or without wedge) or in immersion, with centre frequencies in the range of 0,5 MHz?10 MHz.
It provides methods and acceptance criteria for verifying the performance of combined equipment (i.e. instrument, probe and cables connected). The methods described are suitable for users working under on-site or shop floor conditions. Its purpose is for the verification of the correct operation of the system prior to testing, and also the characterization of sound beams or verification of the absence of degradation of the system.
The methods are not intended to prove the suitability of the system for particular applications, but are intended to prove the capability of the combined equipment to generate ultrasonic beams according to the settings used.
The calibration of the system for a specific application is outside of the scope of part of ISO 18563 and it is intended that it be covered by the test procedure.
ISO 18563-3:2015 does not address the following:
- encircling arrays;
- series of apertures having a different number of elements;
- different settings for transmitting and receiving (e.g. active aperture, number of active elements, delays);
- techniques using post-processing of the signals of individual elements in a more complex manner than a simple delay law (e.g. full matrix capture).

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 21536:2024(Main)
Non-active surgical implants - Joint replacement implants - Specific requirements for knee-joint replacement implants (ISO 21536:2023)
EN ISO 21536:2024

This document specifies requirements for knee-joint replacement implants. Regarding safety, this document specifies requirements for intended performance, design attributes, materials, design evaluation, manufacture, sterilization, packaging, information supplied by the manufacturer and methods of test.
This document applies to both total and partial knee joint replacement implants. It applies to these replacements both with and without the replacement of the patella-femoral joint. It applies to components made of metallic and non-metallic materials.
This document applies to a wide variety of knee replacement implants, but for some specific knee replacement implant types, some considerations, not specifically covered in this document, can be applicable. Further details are given in 7.2.1.2.
The requirements which are specified in this document are not intended to require the re-design or re-testing of implants which have been legally marketed and for which there is a history of sufficient and safe clinical use. For such implants, compliance with this document can be demonstrated by providing evidence of the implant’s sufficient and safe clinical use.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 2997-012:2024(Main)
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 012: Jam-nut for jam-nut receptacles - Product standard
EN 2997-012:2024

This document specifies the characteristics of jam-nuts for jam-nut receptacles in the family of circular electrical connectors coupled by threaded ring.
It applies to class defined in Table 3.
For receptacles using these jam-nuts, see EN 2997-004, and EN 2997-006 for class SE only.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20045:2024(Main)
Measurement of the radioactivity in the environment - Air: tritium - Test method using bubbler sampling (ISO 20045:2023, vključno s popravljeno različico 2023-09)
EN ISO 20045:2024

This document describes a test method to determine the activity concentration of atmospheric tritium by trapping tritium in air by bubbling through a water solution.
The formulae are given for a sampling system with four bubblers. They can also be applied to trapping systems with only one trapping module consisting of two bubblers if only tritiated water vapour (HTO) is in the atmosphere to be sampled.
This document does not cover laboratory test sample results, in becquerel per litre of trapping solution, according to ISO 9698 or ISO 13168.
The test method detection limit result is between 0,2 Bq∙m-3 and 0,5 Bq∙m-3 when the sampling duration is about one week.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 24342:2024(Main)
Resilient and textile floor-covering - Determination of side length, edge straightness and squareness of tiles and planks (ISO 24342:2024)
EN ISO 24342:2024

adapt the test methods to planks

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 24804:2022/A11:2024(Amendment)
Recreational diving services - Requirements for rebreather diver training - No-decompression diving
EN ISO 24804:2022/A11:2024

This document specifies requirements for rebreather diver training programmes which provide the competencies required to perform dives with a rebreather to a maximum depth of 30 m that do not require mandatory decompression stops using a nitrox breathing gas.
This document specifies evaluation criteria for these competencies.
This document specifies the requirements under which training is provided, in addition to the general requirements for recreational diving service provision in accordance with ISO 24803.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20044:2024(Main)
Measurement of radioactivity in the environment - Air: aerosol particles - Test method using sampling by filter media (ISO 20044:2022)
EN ISO 20044:2024

This document provides guidance for
—   the sampling process of the aerosol particles in the air using filter media. This document takes into account the specific behaviour of aerosol particles in ambient air.
—   Two methods for sampling procedures with subsequent or simultaneous measurement:
—   the determination of the activity concentration of radionuclides bound to aerosol particles in the air knowing the activity deposited in the filter;
—   the operating use of continuous air monitoring devices used for real time measurement.
This document describes the test method to determine activity concentrations of radionuclides bound to aerosol particles after air sampling passing through a filter media designed to trap aerosol particles. The method can be used for any type of environmental study or monitoring.
This document does not cover the details of measurement test techniques (gamma spectroscopy, global alpha and beta counting, liquid scintillation, alpha spectrometry) used to determine the activity deposited in the media filter, which are either based on existing standards or internal methods developed by the laboratory in charge of those measurements. Also, this document does not cover the variability of the aerosol particle sizes as given by the composition of the dust contained in ambient air. This document does not address to sampling of radionuclides bound to aerosol particles in the effluent air of nuclear facilities [see ISO 2889:2021].

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 18015:2024(Main)
Automotive fuels - Determination of hydrocarbon group types and select hydrocarbon and oxygenate compounds - Gas chromatography with vacuum ultraviolet absorption spectroscopy (GC-VUV) method
EN 18015:2024

This test method is a standard procedure for the determination of saturates, olefins, aromatics and oxygenates in unleaded petrol using gas chromatography and vacuum ultraviolet detection (GC-VUV).
Concentrations of compound classes and certain individual compounds are determined by mass fraction % (m/m) or volume fraction % (V/V). The concentration ranges for which precision has been determined are as given in Table 1.
NOTE    For the purposes of this document, the terms “% (m/m)” and “% (V/V)” are used to represent respectively the mass fraction and the volume fraction, respectively.
The method is found to be applicable to other oxygenates including isopropanol, iso-butanol, tert-butanol, n-propanol, acetone, tert-pentanol and di-isopropyl ether (DIPE), however precision has not been determined.
Table 1 — Ranges of method applicability
Property   Units   Applicable Range
Saturates   % (V/V)   21,48 to 80,87
Olefins   % (V/V)   0,22 to 41,90
Aromatics   % (V/V)   2,35 to 64,55
Benzene   % (V/V)   0,20 to 2,54
Toluene   % (V/V)   0,87 to 30,97
Ethylbenzene   % (V/V)   0,20 to 3,45
Xylenes   % (V/V)   0,49 to 18,59
Methanol   % (V/V)   0,07 to 15,30
Ethanol   % (V/V)   0,08 to 24,96
MTBE   % (V/V)   0,22 to 22,21
ETBE   % (V/V)   0,13 to 23,44
TAME   % (V/V)   0,24 to 21,96
TAEE   % (V/V)   0,24 to 8,60
Oxygen   % (m/m)   0,52 to 12,19
Individual hydrocarbon components are typically not baseline-separated by the procedure described in this test method. The coelutions are resolved at the detector using VUV absorbance spectra and deconvolution algorithms.
While this test method reports by mass fraction % (m/m) or volume fraction % (V/V) for several specific components that can be present in unleaded petrol, it does not attempt to speciate all possible components that can occur in unleaded petrol. In particular, this test method is not intended as a type of detailed hydrocarbon analysis (DHA).
This test method has been tested for unleaded petrol according EN 228 [1]; the method may apply to petrol blending streams but has not been extensively tested for such applications.
WARNING —The use of this document may involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18589-2:2024(Main)
Measurement of radioactivity in the environment - Soil - Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples (ISO 18589-2:2022)
EN ISO 18589-2:2024

This document specifies the general requirements, based on ISO 11074 and ISO/IEC 17025, for all steps in the planning (desk study and area reconnaissance) of the sampling and the preparation of samples for testing. It includes the selection of the sampling strategy, the outline of the sampling plan, the presentation of general sampling methods and equipment, as well as the methodology of the pre-treatment of samples adapted to the measurements of the activity of radionuclides in soil including granular materials of mineral origin which contain NORM or artificial radionuclides, such as sludge, sediment, construction debris, solid waste of different type and materials from technologically enhanced naturally occurring radioactive materials (mining, coal combustion, phosphate fertilizer production etc.).

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day