SIST EN ISO 24342:2024
(Main)Resilient and textile floor-covering - Determination of side length, edge straightness and squareness of tiles and planks (ISO 24342:2024)
Resilient and textile floor-covering - Determination of side length, edge straightness and squareness of tiles and planks (ISO 24342:2024)
adapt the test methods to planks
Elastische und textile Bodenbeläge - Bestimmung der Kantenlänge, Rechtwinkligkeit und Geradheit von Platten und Dielen (ISO 24342:2024)
Dieses Dokument legt Verfahren zur Bestimmung der Kantenlängen, Kantengeradheit und Rechtwinkligkeit von quadratischen und/oder rechtwinkligen elastischen oder textilen Bodenplatten und Dielen fest.
Revêtements de sol résilients ou textiles - Détermination de la longueur des bords, de la rectitude des arêtes et de l'équerrage des dalles et des lames(ISO 24342:2024)
Le présent document spécifie des méthodes de détermination de la longueur des bords, de la rectitude des arêtes et de l’équerrage des revêtements de sol résilients ou textiles carrés et/ou rectangulaires sous forme de dalles et de lames.
Netekstilne in tekstilne talne obloge - Določanje stranske dolžine, ravnosti robov in pravokotnosti plošč in desk (ISO 24342:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2024
Netekstilne in tekstilne talne obloge - Določanje stranske dolžine, ravnosti robov
in pravokotnosti plošč in desk (ISO 24342:2024)
Resilient and textile floor-covering - Determination of side length, edge straightness and
squareness of tiles and planks (ISO 24342:2024)
Elastische und textile Bodenbeläge - Bestimmung der Kantenlänge, Rechtwinkligkeit und
Geradheit von Platten und Dielen (ISO 24342:2024)
Revêtements de sol résilients ou textiles - Détermination de la longueur des bords, de la
rectitude des arêtes et de l'équerrage des dalles et des lames(ISO 24342:2024)
Ta slovenski standard je istoveten z: EN ISO 24342:2024
ICS:
97.150 Talne obloge Floor coverings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 24342
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2024
EUROPÄISCHE NORM
ICS 97.150 Supersedes EN ISO 24342:2018
English Version
Resilient and textile floor-covering - Determination of side
length, edge straightness and squareness of tiles and
planks (ISO 24342:2024)
Revêtements de sol résilients ou textiles - Elastische und textile Bodenbeläge - Bestimmung der
Détermination de la longueur des bords, de la rectitude Kantenlänge, Rechtwinkligkeit und Geradheit von
des arêtes et de l'équerrage des dalles et des lames(ISO Platten und Dielen (ISO 24342:2024)
24342:2024)
This European Standard was approved by CEN on 28 April 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 24342:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 24342:2024) has been prepared by Technical Committee ISO/TC 219 "Floor
coverings" in collaboration with Technical Committee CEN/TC 134 “Resilient, textile, laminate and
modular mechanical locked floor coverings” the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2025, and conflicting national standards shall
be withdrawn at the latest by January 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 24342:2018.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 24342:2024 has been approved by CEN as EN ISO 24342:2024 without any modification.
International
Standard
ISO 24342
Fourth edition
Resilient and textile floor
2024-06
coverings — Determination of
side length, edge straightness and
squareness of tiles and planks
Revêtements de sol résilients et textiles — Détermination de la
longueur des bords, de la rectitude des arêtes et de l’équerrage
des dalles et des lames
Reference number
ISO 24342:2024(en) © ISO 2024
ISO 24342:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 24342:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
5.1 Reference plate .2
5.2 Rigid metal or glass plate .3
5.3 Flat bedplate apparatus . .3
5.4 Dial gauge, calliper gauge and/or thickness gauges .5
5.5 Movable dial gauges apparatus . .5
6 Sampling and selection of specimens . 6
7 Atmosphere for conditioning and testing . 6
7.1 Resilient floor coverings .6
7.2 Textile floor coverings .7
8 Procedure . 7
8.1 General .7
8.2 Side length .7
8.2.1 Gauge method .7
8.2.2 Movable dial gauge method .7
8.2.3 Sliding calliper method . . .8
8.3 Edge straightness .8
8.3.1 Thickness gauge method .8
8.3.2 Movable dial gauge method .8
8.4 Squareness .9
8.4.1 Thickness gauge method .9
8.4.2 Movable dial gauge method .9
9 Calculation and expression of the results . 9
9.1 For flat bedplate apparatus (5.3) and thickness gauge (5.4) .9
9.1.1 Side length .9
9.1.2 Edge straightness .9
9.1.3 Squareness .9
9.2 For the movable dial gauge apparatus .9
9.2.1 Tiles .9
9.2.2 Planks .9
9.3 For the sliding calliper apparatus . .10
10 Test report . 10
Bibliography .12
iii
ISO 24342:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be repr
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.