SIST EN ISO 105-E04:2013
(Main)Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (ISO 105-E04:2013)
Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (ISO 105-E04:2013)
ISO 105-E04:2013 specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to the action of human perspiration.
Textilien - Farbechtheitsprüfungen - Teil E04: Farbechtheit gegen Schweiß (ISO 105-E04:2013)
Dieser Teil der ISO 105 legt ein Verfahren zur Bestimmung der Widerstandskraft der Farbe von Textilien aller Art und in allen Verarbeitungszuständen gegen die Einwirkung von menschlichem Schweiß fest.
Textiles - Essais de solidité des coloris - Partie E04: Solidité des coloris à la sueur (ISO 105-E04:2013)
L'ISO 105-E04:2013 spécifie une méthode de détermination de la solidité des coloris sur les textiles de toute nature, à tous leurs stades de transformation, à l'action de la sueur produite par le corps humain.
Tekstilije - Preskušanje barvne obstojnosti - Del E04: Barvna obstojnost proti znoju (ISO 105-E04:2013)
Ta del standarda ISO 105 določa metodo za določevanje odpornosti barve tekstilij vseh vrst in oblik tekstilij proti znojenju.
General Information
- Status
- Published
- Publication Date
- 07-Oct-2013
- Technical Committee
- ITEK - Textile and textile products
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 27-Sep-2013
- Due Date
- 02-Dec-2013
- Completion Date
- 08-Oct-2013
Relations
- Effective Date
- 01-Nov-2013
Overview
EN ISO 105‑E04:2013 - Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration specifies a laboratory method to determine the resistance of textile colour to the action of human perspiration. Published by CEN and identical to ISO 105‑E04:2013, this standard defines specimen preparation, test solutions, apparatus, test conditions and assessment procedures for measuring change in colour and staining caused by acidic and alkaline perspiration solutions.
Key topics and technical requirements
- Scope: Tests textiles of all kinds and in all forms for colour fastness to perspiration.
- Test principle: Composite specimens (test fabric + adjacent fabric) are soaked in acid (pH 5.5) and alkaline (pH 8.0) perspiration solutions containing l‑histidine, sodium chloride and phosphates, then pressed under a defined pressure, dried and assessed.
- Apparatus & conditions:
- Specimen size: (40 ± 2) mm × (100 ± 2) mm.
- Nominal pressure: (12.5 ± 0.9) kPa applied by a stainless steel weight-piece.
- Oven temperature: (37 ± 2) °C, test duration 4 h.
- Solutions: Freshly prepared acid and alkaline solutions using grade 3 water (ISO 3696), histidine, NaCl and specified phosphate salts; pH adjusted with 0.1 mol/L NaOH.
- Adjacent fabrics: Use a multifibre adjacent fabric (ISO 105‑F10) or two single-fibre adjacent fabrics (ISO 105‑F01–F06). One adjacent fabric should match the fibre type of the tested textile; Table 1 in the standard lists recommended second-piece fibres (e.g., if first is cotton → second wool).
- Assessment: Change in colour and staining are rated using grey scales (ISO 105‑A02 / A03) or instrumentally (ISO 105‑A04 / A05). Reporting must include numerical grey scale ratings and identification of adjacent fabrics used.
Applications and practical value
- Assessing colour fastness to perspiration is critical for apparel, sportswear, workwear, medical textiles and upholstery where contact with human sweat may cause dye transfer or colour change.
- Results guide dye selection, finishing processes, quality control and product specifications to reduce customer complaints about staining or fading.
- Test data support product labelling, supplier contracts and comparative performance claims (e.g., “sweat‑fastness grades”).
Who uses this standard
- Textile and apparel manufacturers, dye houses and fabric finishers
- Independent textile testing laboratories and QA departments
- Retailers, specifiers and product compliance teams assessing garment durability
Related standards
- ISO 105 series: ISO 105‑A01 (general principles), A02 (grey scale for change), A03 (grey scale for staining), A04/A05 (instrumental assessment)
- ISO 105‑F01 to F06 (single‑fibre adjacent fabrics), ISO 105‑F10 (multifibre adjacent fabric)
- ISO 3696 (water for analytical laboratory use)
Keywords: colour fastness to perspiration, EN ISO 105‑E04:2013, textile testing, perspiration testing, grey scale, adjacent fabric, ISO 105.
Frequently Asked Questions
SIST EN ISO 105-E04:2013 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (ISO 105-E04:2013)". This standard covers: ISO 105-E04:2013 specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to the action of human perspiration.
ISO 105-E04:2013 specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to the action of human perspiration.
SIST EN ISO 105-E04:2013 is classified under the following ICS (International Classification for Standards) categories: 59.080.01 - Textiles in general. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN ISO 105-E04:2013 has the following relationships with other standards: It is inter standard links to SIST EN ISO 105-E04:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN ISO 105-E04:2013 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2013
1DGRPHãþD
SIST EN ISO 105-E04:2009
Tekstilije - Preskušanje barvne obstojnosti - Del E04: Barvna obstojnost proti
znoju (ISO 105-E04:2013)
Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (ISO 105-
E04:2013)
Textilien - Farbechtheitsprüfungen - Teil E04: Farbechtheit gegen Schweiß (ISO 105-
E04:2013)
Textiles - Essais de solidité des coloris - Partie E04: Solidité des coloris à la sueur (ISO
105-E04:2013)
Ta slovenski standard je istoveten z: EN ISO 105-E04:2013
ICS:
59.080.01 Tekstilije na splošno Textiles in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 105-E04
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2013
ICS 59.080.01 Supersedes EN ISO 105-E04:2009
English Version
Textiles - Tests for colour fastness - Part E04: Colour fastness
to perspiration (ISO 105-E04:2013)
Textiles - Essais de solidité des coloris - Partie E04: Textilien - Farbechtheitsprüfungen - Teil E04: Farbechtheit
Solidité des coloris à la sueur (ISO 105-E04:2013) gegen Schweiß (ISO 105-E04:2013)
This European Standard was approved by CEN on 14 January 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 105-E04:2013: E
worldwide for CEN national Members.
Contents Page
Foreword . 3
Foreword
This document (EN ISO 105-E04:2013) has been prepared by Technical Committee ISO/TC 38 "Textiles" in
collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of which is
held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2013, and conflicting national standards shall be
withdrawn at the latest by September 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 105-E04:2009.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 105-E04:2013 has been approved by CEN as EN ISO 105-E04:2013 without any modification.
INTERNATIONAL ISO
STANDARD 105-E04
Sixth edition
2013-03-15
Textiles — Tests for colour fastness —
Part E04:
Colour fastness to perspiration
Textiles — Essais de solidité des coloris —
Partie E04: Solidité des coloris à la sueur
Reference number
ISO 105-E04:2013(E)
©
ISO 2013
ISO 105-E04:2013(E)
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved
ISO 105-E04:2013(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Principle . 1
4 Apparatus and materials. 2
5 Test specimen . 3
6 Procedure. 3
7 Test report . 5
ISO 105-E04:2013(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 105-E04 was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 1, Tests for
coloured textiles and colorants.
This sixth edition cancels and replaces the fifth edition (ISO 105-E04:2008), of which it constitutes a
minor revision.
ISO 105 consists of many parts designated by a part letter and a two-digit serial number (e.g. A01), under
the general title Textiles — Tests for colour fastness. A complete list of these parts is given in ISO 105-A01.
iv © ISO 2013 – All rights reserved
INTERNATIONAL STANDARD ISO 105-E04:2013(E)
Textiles — Tests for colour fastness —
Part E04:
Colour fast
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...