SIST EN ISO 6501:2020

SLOVENSKI STANDARD
SIST EN ISO 6501:2020
01-oktober-2020
Nadomešča:
SIST EN 26501:2009
Feronikelj - Specifikacija in zahteve pri dobavi (ISO 6501:2020)
Ferronickel - Specification and delivery requirements (ISO 6501:2020)
Ferronickel - Spezifikation und Lieferbedingungen (ISO 6501:2020)
Ferro-nickel - Spécifications et conditions de livraison (ISO 6501:2020)
Ta slovenski standard je istoveten z: EN ISO 6501:2020
ICS:
77.100 Železove zlitine Ferroalloys
SIST EN ISO 6501:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 6501:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 6501:2020


EN ISO 6501
EUROPEAN STANDARD

NORME EUROPÉENNE

June 2020
EUROPÄISCHE NORM
ICS 77.100 Supersedes EN 26501:1992
English Version

Ferronickel - Specification and delivery requirements (ISO
6501:2020)
Ferro-nickel - Spécifications et conditions de livraison Ferronickel - Spezifikation und Lieferbedingungen (ISO
(ISO 6501:2020) 6501:2020)
This European Standard was approved by CEN on 4 April 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6501:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 6501:2020
EN ISO 6501:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 6501:2020
EN ISO 6501:2020 (E)
European foreword
This document (EN ISO 6501:2020) has been prepared by Technical Committee ISO/TC 155 "Nickel and
nickel alloys" in collaboration with CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2020, and conflicting national standards
shall be withdrawn at the latest by December 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 26501:1992.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 6501:2020 has been approved by CEN as EN ISO 6501:2020 without any modification.


3

---------------------- Page: 5 ----------------------
SIST EN ISO 6501:2020

---------------------- Page: 6 ----------------------
SIST EN ISO 6501:2020
INTERNATIONAL ISO
STANDARD 6501
Second edition
2020-06
Ferronickel — Specification and
delivery requirements
Ferro-nickel — Spécifications et conditions de livraison
Reference number
ISO 6501:2020(E)
©
ISO 2020

---------------------- Page: 7 ----------------------
SIST EN ISO 6501:2020
ISO 6501:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

---------------------- Page: 8 ----------------------
SIST EN ISO 6501:2020
ISO 6501:2020(E)

Contents  Page
Foreword .iv
1 Scope . 1
2  Normative references . 1
3  Terms and definitions . 1
4  Information for ordering . 2
5  Requirements . 2
5.1 Chemical composition . 2
5.2 Form of delivery and formation of lots . 3
5.2.1 General. 3
5.2.2 Ferronickel in ingots . 3
5.2.3 Ferronickel in pieces . . 3
5.2.4 Ferronickel in the form of shot . 4
5.3 Contamination . 4
6  Control . 4
6.1 General . 4
6.2 Sampling for analysis . 4
6.3 Analysis. 4
6.3.1 Ferronickel furnished with analysis certificate . 4
6.3.2 Ferronickel settled with exchange analysis . 4
6.4 Procedures in case of dispute . 5
6.4.1 General. 5
6.4.2 Contradictory procedure . 5
6.4.3 Arbitration procedure . 5
Annex A (informative) Examples of ferronickel classification . 6
© ISO 2020 – All rights reserved iii

---------------------- Page: 9 ----------------------
SIST EN ISO 6501:2020
ISO 6501:2020(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO’s adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see
www .iso .org/ iso/ foreword .html.
This do
...