iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1011-3:2001/A1:2004

(Amendment)

Welding - Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels

Welding - Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels

This European Standard gives general recommendations for the fusion welding of stainless steels. Specific details relevant to austenitic, austenitic-ferritic, ferritic and martensitic stainless are given in annexes A to D.

Schweißen - Empfehlungen zum Schweißen metallischer Werkstoffe - Teil 3: Lichtbogenschweißen von nichtrostenden Stählen

Diese Europäische Norm enthält allgemeine Anforderungen für das Schmelzschweißen von nichtrostenden Stählen. Besondere Hinweise, die sich auf austenitisch-ferritische, ferritische und martensitische nichtrostende Stählen beziehen, sind in den Anhängen A bis D wiedergegeben.

Soudage - Recommendations pour le soudage des matériaux métalliques - Partie 3 : Soudage a l'arc des aciers inoxydables

La présente Norme européenne donne des recommandations générales pour le soudage par fusion des aciers inoxydables. Des détails spécifiques aux aciers inoxydables. austénitiques, austéno-ferritiques, ferritiques et martensitiques sont donnés dans les annexes A a D.

Varjenje - Priporočila za varjenje kovinskih materialov - 3. del: Obločno varjenje nerjavnih jekel

General Information

Status
Withdrawn
Publication Date
31-May-2004
Withdrawal Date
30-Jan-2019
ICS
25.160.10 - Welding processes
77.140.20 - Stainless steels
Technical Committee
VAR - Welding
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
09-Jan-2019
Due Date
01-Feb-2019
Completion Date
31-Jan-2019
Directive
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
Ref Project
EN 1011-3:2000/A1:2003 - Welding - Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels

Relations

Replaced By
SIST EN 1011-3:2019 - Welding - Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels
Effective Date
01-Mar-2019
Amends
SIST EN 1011-3:2001 - Welding - Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels
Effective Date
01-Jun-2004
Amends
SIST EN 1011-3:2001 - Welding - Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels
Effective Date
08-Jun-2022

Buy Standard

EN 1011-3:2001/A1:2004EN 1011-3:2001/A1:2004
PreviousNext
Amendment
EN 1011-3:2001/A1:2004
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1011-3:2001/A1:2004
01-junij-2004
9DUMHQMH3ULSRURþLOD]DYDUMHQMHNRYLQVNLKPDWHULDORYGHO2EORþQRYDUMHQMH
QHUMDYQLKMHNHO
Welding - Recommendations for welding of metallic materials - Part 3: Arc welding of
stainless steels
Schweißen - Empfehlungen zum Schweißen metallischer Werkstoffe - Teil 3:
Lichtbogenschweißen von nichtrostenden Stählen
Soudage - Recommendations pour le soudage des matériaux métalliques - Partie 3 :
Soudage a l'arc des aciers inoxydables
Ta slovenski standard je istoveten z: EN 1011-3:2000/A1:2003
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
77.140.20 Visokokakovostna j
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 1011-3:2019(Main)
Welding - Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels
EN 1011-3:2018

This European Standard gives general recommendations for the fusion welding of stainless steels. Specific details relevant to austenitic, austenitic-ferritic, ferritic and martensitic stainless are given in annexes A to D.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1011-3:2019(Main)
Welding - Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels
EN 1011-3:2018

This European Standard gives general recommendations for the fusion welding of stainless steels. Specific details relevant to austenitic, austenitic-ferritic, ferritic and martensitic stainless are given in annexes A to D.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN ISO/TS 16486-7:2023(Main)
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 7: Assessment of conformity (ISO/TS 16486-7:2023)
CEN ISO/TS 16486-7:2023

This document gives guidance and requirements for the assessment of conformity of compounds, products, joints and assemblies in accordance with the applicable part(s) of the ISO 16486 series which are intended to be included in the manufacturer’s quality plan as part of the quality management system and for the establishment of certification procedures.
NOTE 1    A basic test matrix in Annex B provides an overview of the testing scheme.
It is recommended for the manufacturer to have a management system such as ISO 9001[4] or equivalent.
NOTE 2    If certification is involved, certification bodies and inspection bodies operating according to ISO/IEC 17065 and ISO/IEC 17020 are considered to be competent.
In conjunction with the other parts of the ISO 16486 series (see Clause 2), this document is applicable to unplasticized polyamide (PA-U) piping systems intended to be buried and used for the supply of gaseous fuels. It is applicable to PA-U pipes, fittings and valves, as well as to their joints and to joints with components of other materials intended to be used under the following conditions:
a)    a maximum operating pressure (MOP) up to and including 18 bar[1] (the MOP is limited to 16 bar for CEN member countries, where ISO 16486-6 is replaced by CEN/TS 12007-6[1]);
b)    an operating temperature of 20 °C as the reference temperature.
NOTE 3    For operating temperatures different to 20 °C, derating coefficients can be used (see ISO 16486-6). CEN member countries use CEN/TS 12007-6[1] and ISO/TS 16486-7 (this document) as a basis, but they can also request additional requirements. For non-CEN member countries, information for dealing with special cases for PA-U can be found in ISO/TS 16486-7 (this document) and PPI TR-3.[7]
For mechanical fittings conforming to ISO 17885, guidance for assessment of conformity is not given in this document. When requested, a quality plan based on the tests mentioned can be set up in agreement between user and manufacturer.
The ISO 16486 series covers a range of maximum operating pressures and gives requirements concerning colours.
NOTE 4    It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes.
[1] 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2.

  • Technical specification
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 301 406-2 V3.1.1:2023(Main)
Digital Enhanced Cordless Telecommunications (DECT) - Harmonised Standard for access to radio spectrum - Part 2: DECT-2020 NR
ETSI EN 301 406-2 V3.1.1 (2023-08)

DEN/DECT-00359-2

  • Standard
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    76 pages
    English language
    sale 15% off
  • Standard
    76 pages
    English language
    sale 15% off
  • Draft
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60061-3:2000/A59:2023(Main)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges (IEC 60061-3:1969/AMD59:2023)
EN 60061-3:1993/A59:2023
  • Amendment
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16186-5:2021+A1:2023(Main + Amendment)
Railway applications - Driver's cabs - Part 5: External visibility for tram vehicles
EN 16186-5:2021+A1:2023

This document specifies the external front and rear visibility conditions from cabs of tram
vehicles and the associated assessment method.
This document applies to vehicles operating on tram networks.
This document does not apply to driver's auxiliary desks.
This standard is not intended to be applied for tram train.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60061-2:1999/A59:2023(Main)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders (IEC 60061-2:1969/AMD59:2023)
EN 60061-2:1993/A59:2023
  • Amendment
    19 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST IEC 60050-811:2023/A1:2023(Amendment)
Amendment 1: International Electrotechnical Vocabulary (IEV) - Part 811: Electric traction
IEC 60050-811:2017/AMD1:2021
  • Standard
    3 pages
    English and French language
    sale 15% off
  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60721-3-4:2019/AC:2023(Corrigendum)
Classification of environmental conditions - Part 3-4: Classification of groups of environmental parameters and their severities - Stationary use at non-weatherprotected locations (IEC 60721-3-4:2019/COR1:2023)
EN IEC 60721-3-4:2019/AC:2023-08
  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST IEC 60050-811:2023(Main)
International Electrotechnical Vocabulary (IEV) - Part 811: Electric traction
IEC 60050-811:2017

IEC 60050-811:2017 gives the general terminology relating to electric traction used in electrical equipment and systems for railways, as well as general terms pertaining to specific applications and associated technologies. This new edition reviews and complements the previous one. This terminology is consistent with the terminology developed in the other specialized parts of the IEV.
It has the status of a horizontal standard in accordance with IEC Guide 108.

  • Standard
    626 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    612 pages
    English and French language
    sale 15% off