SIST EN ISO 4259-1:2018/A2:2021

SLOVENSKI STANDARD
01-marec-2021
Nafta in sorodni proizvodi - Natančnost merilnih metod in rezultatov - 1. del:
Določanje natančnosti preskusnih metod - Dopolnilo 2 (ISO 4259-1:2017/Amd
2:2020)
Petroleum and related products - Precision of measurement methods and results - Part
1:Determination of precision data in relation to methods of test - AMENDMENT 2 (ISO
4259-1:2017/Amd 2:2020)
Mineralölerzeugnisse - Präzision von Messverfahren und Ergebnissen - Teil 1:
Bestimmung der Präzisionsdaten von Prüfverfahren - ÄNDERUNG 2 (ISO 4259-
1:2017/Amd 2:2020)
Produits pétroliers - Fidélité des méthodes de mesure et des résultats - Partie 1:
Détermination des valeurs de fidélité relatives aux méthodes d’essai - AMENDEMENT 2
(ISO 4259-1:2017/Amd 2:2020)
Ta slovenski standard je istoveten z: EN ISO 4259-1:2017/A2:2020
ICS:
75.080 Naftni proizvodi na splošno Petroleum products in
general
75.180.30 Oprema za merjenje Volumetric equipment and
prostornine in merjenje measurements
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 4259-1:2017/A2
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2020
EUROPÄISCHE NORM
ICS 75.080
English Version
Petroleum and related products - Precision of
measurement methods and results - Part 1:Determination
of precision data in relation to methods of test -
AMENDMENT 2 (ISO 4259-1:2017/Amd 2:2020)
Produits pétroliers - Fidélité des méthodes de mesure Mineralölerzeugnisse - Präzision von Messverfahren
et de leurs résultats - Partie 1: Détermination des und Ergebnissen - Teil 1: Bestimmung der
valeurs de fidélité relatives aux méthodes d'essai - Präzisionsdaten von Prüfverfahren - ÄNDERUNG 2
AMENDEMENT 2 (ISO 4259-1:2017/Amd 2:2020) (ISO 4259-1:2017/Amd 2:2020)
This amendment A2 modifies the European Standard EN ISO 4259-1:2017; it was approved by CEN on 19 October 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4259-1:2017/A2:2020 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 4259-1:2017/A2:2020) has been prepared by Technical Committee ISO/TC 28
"Petroleum and related products, fuels and lubricants from natural or synthetic sources" in
collaboration with Technical Committee CEN/TC 19 “Gaseous and liquid fuels, lubricants and related
products of petroleum, synthetic and biological origin.” the secretariat of which is held by NEN.
This Amendment to the European Standard EN ISO 4259-1:2017 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by June 2021, and
conflicting national standards shall be withdrawn at the latest by June 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 4259-1:2017/Amd 2:2020 has been approved by CEN as EN ISO 4259-1:2017/A2:2020
without any modification.
INTERNATIONAL ISO
STANDARD 4259-1
First edition
2017-11
AMENDMENT 2
2020-12
Petroleum and related products —
Precision of measurement methods
and results —
Part 1:
Determination of precision data in
relation to methods of test
AMENDMENT 2
Produits pétroliers et connexes — Fidélité des méthodes de mesure et
de leurs résultats —
Partie 1: Détermination des valeurs de fidélité relatives aux
méthodes d'essai
AMENDEMENT 2
Reference number
ISO 4259-1:2017/Amd.2:2020(E)
©
ISO 2020
ISO 4259-1:2017/Amd.2:2020(E)
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by
...