SIST EN 60118-0:2015
(Main)Electroacoustics - Hearing aids - Measurement of the performance characteristics of hearing aids
Electroacoustics - Hearing aids - Measurement of the performance characteristics of hearing aids
This part of IEC 60118 gives recommendations for the measurement of the performance
characteristics of air conduction hearing aids based on a free field technique and measured
with an acoustic coupler.
This part of IEC 60118 is applicable to the measurement and evaluation of the
electroacoustical characteristics of hearing aids, for example for type testing and
manufacturer data sheets.
The test results obtained by the methods specified in this part of IEC 60118 will express the
performance under conditions of the test and may deviate substantially from the performance
of the hearing aid under actual conditions of use.
This part of IEC 60118 uses an acoustic coupler according to IEC 60318-5 which is only
intended for loading a hearing aid with a specified acoustic impedance and is not intended to
model the sound pressure in a person’s ear. The use of this acoustic coupler will yield
different results from those obtained using the occluded ear simulator of IEC 60318-4 as used
in former editions of IEC 60118-0.
For the measurement of the performance characteristics of hearing aids for simulated in situ
working conditions, IEC 60118-8 can be used. For measurement of hearing aids under typical
user settings and using a speech-like signal, IEC 60118-15 can be used.
For the measurement of the performance characteristics of hearing aids for production, supply
and delivery quality-assurance purposes, IEC 60118-7 can be used. The frequency range has
been extended to 8 kHz in this part of IEC 60118 as opposed to 5 kHz in IEC 60118-7.
Though the number of measurements covered by this part of IEC 60118 is limited, it is not
intended that all measurements described herein are mandatory.
In cases of custom-made in-the-ear instruments, the data supplied by the manufacturer
applies only to the particular hearing aid being tested.
/
Electroacoustique Appareils de correction auditive Mesure des caractéristiques de performance des corrections auditives
L'IEC 60118-0:2015 donne des recommandations pour la mesure des caractéristiques fonctionnelles des appareils de correction auditive à conduction aérienne, fondée sur une technique en champ acoustique libre utilisant un coupleur acoustique. Cette troisième édition annule et remplace la deuxième édition parue en 1983 et son Amendement 1:1994, l'IEC 60118-1:1995, l'Amendement 1:1998, l'IEC 60118-2:1983, l'Amendement 1:1993, l'Amendement 2:1997 et l'IEC 60118-6:1999. Cette édition constitue une révision technique.
Elektroakustika - Slušni aparati - Meritve tehničnih karakteristik slušnih aparatov
Ta del standarda IEC 60118 podaja priporočila za meritve tehničnih karakteristik slušnih aparatov, ki delujejo na podlagi prevajanja zvoka po zraku in ki temeljijo na tehniki prostega polja (free field technique) ter so izmerjene s pomočjo akustičnega spojnika.
Ta del standarda IEC 60118 velja za meritve in ocenjevanje elektroakustičnih karakteristik slušnih aparatov za potrebe, na primer, tipskega preskušanja in tehničnih listov proizvajalca.
Rezultati preskusov, pridobljeni z metodami, ki so navedene v tem delu standarda IEC 60118, prikazujejo delovanje v preskusnih pogojih in lahko znatno odstopajo od delovanja slušnega aparata v dejanskih pogojih uporabe.
Ta del standarda IEC 60118 uporablja akustični spojnik skladno s standardom IEC 60318-5, ki obremeni slušni aparat z določeno akustično impedanco in ne spreminja zvočnega tlaka v ušesu. Rezultati, pridobljeni z uporabo tega akustičnega spojnika, se bodo razlikovali od tistih, ki so pridobljeni z uporabo simulatorja zamašenega ušesa, zajetega v standardu IEC 60318-4, kot jo določajo starejše različice standarda IEC 60118-0.
Za meritev tehničnih karakteristik slušnih aparatov v simuliranih pogojih na kraju uporabe lahko uporabite standard IEC 60118-8. Za meritev karakteristik slušnih aparatov z običajnimi uporabniškimi nastavitvami in z uporabo govoru podobnega signala lahko uporabite standard IEC 60118-15.
Za meritev tehničnih karakteristik slušnih aparatov za namene zagotavljanja kakovosti pri izdelavi, dobavi in dostavi lahko uporabite standard IEC 60118-7. Frekvenčni razpon je v tem delu standarda IEC 60118 razširjen na 8 kHz v primerjavi s standardom IEC 60118-7, kjer je bil omejen na 5 kHz.
Čeprav je število meritev, ki jih zajema ta del standarda IEC 60118, omejeno, vse tu opisane meritve niso obvezne.
V primeru instrumentov za vstavitev v uho, ki so narejeni po meri, podatki, ki jih zagotovi proizvajalec, veljajo samo za določen slušni aparat, ki se ga preskuša.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60118-0:2015
01-december-2015
1DGRPHãþD
SIST EN 60118-0:2002
SIST EN 60118-0:2002/A1:2002
SIST EN 60118-1:2002 + A1:2002
SIST EN 60118-2:2004
SIST EN 60118-2:2004/A2:2006
SIST EN 60118-6:2002
(OHNWURDNXVWLND6OXãQLDSDUDWL0HULWYHWHKQLþQLKNDUDNWHULVWLNVOXãQLKDSDUDWRY
Electroacoustics - Hearing aids - Measurement of the performance characteristics of
hearing aids
/
Electroacoustique Appareils de correction auditive Mesure des caractéristiques de
performance des corrections auditives
Ta slovenski standard je istoveten z: EN 60118-0:2015
ICS:
11.180.15 3ULSRPRþNL]DJOXKHRVHEHLQ Aids for deaf and hearing
RVHEH]RNYDURVOXKD impaired people
17.140.50 Elektroakustika Electroacoustics
SIST EN 60118-0:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60118-0:2015
---------------------- Page: 2 ----------------------
SIST EN 60118-0:2015
EUROPEAN STANDARD EN 60118-0
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2015
ICS 17.140.50 Supersedes EN 60118-0:1993, EN 60118-1:1995, EN
60118-2:1995, EN 60118-6:1999
English Version
Electroacoustics - Hearing aids - Part 0: Measurement of the
performance characteristics of hearing aids
(IEC 60118-0:2015)
Electroacoustique - Appareils de correction auditive - Partie Akustik - Hörgeräte - Teil 0: Messung der
0: Mesure des caractéristiques fonctionnelles des appareils Leistungsmerkmale von Hörgeräten
de correction auditive (IEC 60118-0:2015)
(IEC 60118-0:2015)
This European Standard was approved by CENELEC on 2015-07-14. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60118-0:2015 E
---------------------- Page: 3 ----------------------
SIST EN 60118-0:2015
EN 60118-0:2015
European foreword
The text of document 29/867A/FDIS, future edition 3 of IEC 60118-0, prepared by IEC TC 29,
Electroacoustics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60118-0:2015.
The following dates are fixed:
(dop) 2016-04-14
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2018-07-14
standards conflicting with the
document have to be withdrawn
This document supersedes EN 60118-0:1993, EN 60118-1:1995, EN 60118-2:1995, EN 60118-6:1999.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 60118-0:2015 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated :
IEC 60068 (series) NOTE Harmonized as EN 60068 (series).
IEC 60118-7:2005 NOTE Harmonized as EN 60118-7:2005.
IEC 60118-8:2005 NOTE Harmonized as EN 60118-8:2005.
IEC 60118-12 NOTE Harmonized as EN 60118-12.
IEC 60118-15 NOTE Harmonized as EN 60118-15.
IEC 60318-1 NOTE Harmonized as EN 60318-1.
IEC 60118-15 NOTE Harmonized as EN 60118-15.
IEC 60318-4:2010 NOTE Harmonized as EN 60318-4:2010.
2
---------------------- Page: 4 ----------------------
SIST EN 60118-0:2015
EN 60118-0:2015
Annex ZA
(normative)
Normative references to international publications
with their corresponding Eur
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.