SIST EN ISO 13918:2018/A1:2021

SLOVENSKI STANDARD
SIST EN ISO 13918:2018/A1:2021
01-november-2021
Varjenje - Čepi in keramični obroči za obločno varjenje čepov - Dopolnilo A1 (ISO
13918:2017/Amd 1:2021)
Welding - Studs and ceramic ferrules for arc stud welding - Amendment 1 (ISO
13918:2017/Amd 1:2021)
Schweißen - Bolzen und Keramikringe für das Lichtbogenbolzenschweißen - Änderung 1
(ISO 13918:2017/Amd 1:2021)
Soudage - Goujons et bagues céramiques pour le soudage à l'arc des goujons -
Amendement 1 (ISO 13918:2017/Amd 1:2021)
Ta slovenski standard je istoveten z: EN ISO 13918:2018/A1:2021
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
25.160.10 Varilni postopki in varjenje Welding processes
SIST EN ISO 13918:2018/A1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 13918:2018/A1:2021

---------------------- Page: 2 ----------------------
SIST EN ISO 13918:2018/A1:2021


EN ISO 13918:2018/A1
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2021
EUROPÄISCHE NORM
ICS 21.060.10; 25.160.10
English Version

Welding - Studs and ceramic ferrules for arc stud welding -
Amendment 1 (ISO 13918:2017/Amd 1:2021)
Soudage - Goujons et bagues céramiques pour le Schweißen - Bolzen und Keramikringe für das
soudage à l'arc des goujons - Amendement 1 (ISO Lichtbogenbolzenschweißen - Änderung 1 (ISO
13918:2017/Amd 1:2021) 13918:2017/Amd 1:2021)
This amendment A1 modifies the European Standard 2852531; it was approved by CEN on 17 August 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13918:2018/A1:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 13918:2018/A1:2021
EN ISO 13918:2018/A1:2021 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 13918:2018/A1:2021
EN ISO 13918:2018/A1:2021 (E)
European foreword
This document (EN ISO 13918:2018/A1:2021) has been prepared by Technical Committee ISO/TC 44
"Welding and allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding and
allied processes” the secretariat of which is held by DIN.
This Amendment to the European Standard EN ISO 13918:2018 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by March 2022, and
conflicting national standards shall be withdrawn at the latest by March 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN websites.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 13918:2017/Amd 1:2021
...