SIST EN ISO 6802:2019

SLOVENSKI STANDARD
SIST EN ISO 6802:2019
01-januar-2019
1DGRPHãþD
SIST EN ISO 6802:2009
*XPHQHDOLSROLPHUQHFHYLWHUFHYQLSULNOMXþNL+LGUDYOLþQRVXQNRYQRSUHVNXãDQMH
]XSRJLEDQMHP,62
Rubber or plastics hoses and hose assemblies - Hydraulic impulse test with flexing (ISO
6802:2018)
Gummi- und Kunststoffschläuche und Schlauchleitungen mit Drahtgeflechteinlage -
Hydraulik-Impulsprüfung mit wechselnder Biegung (ISO 6802:2018)
Tuyaux et flexibles en caoutchouc et en plastique renforcés par des fils métalliques -
Essai d'impulsions hydrauliques avec flexions (ISO 6802:2018)
Ta slovenski standard je istoveten z: EN ISO 6802:2018
ICS:
23.040.70 Gumene cevi in armature Hoses and hose assemblies
SIST EN ISO 6802:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 6802:2019

---------------------- Page: 2 ----------------------

SIST EN ISO 6802:2019


EN ISO 6802
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2018
EUROPÄISCHE NORM
ICS 23.040.70 Supersedes EN ISO 6802:2008
English Version

Rubber or plastics hoses and hose assemblies - Hydraulic
impulse test with flexing (ISO 6802:2018)
Tuyaux et flexibles en caoutchouc et en plastique Gummi- und Kunststoffschläuche und -
renforcés par des fils métalliques - Essai d'impulsions schlauchleitungen - Hydraulik-Impulsprüfung mit
hydrauliques avec flexions (ISO 6802:2018) wechselnder Biegung (ISO 6802:2018)
This European Standard was approved by CEN on 19 August 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6802:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 6802:2019
EN ISO 6802:2018 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 6802:2019
EN ISO 6802:2018 (E)
European foreword
This document (EN ISO 6802:2018) has been prepared by Technical Committee ISO/TC 45 "Rubber and
rubber products" in collaboration with Technical Committee CEN/TC 218 “Rubber and plastics hoses
and hose assemblies” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2019, and conflicting national standards shall be
withdrawn at the latest by April 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 6802:2008.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 6802:2018 has been approved by CEN as EN ISO 6802:2018 without any modification.


3

---------------------- Page: 5 ----------------------

SIST EN ISO 6802:2019

---------------------- Page: 6 ----------------------

SIST EN ISO 6802:2019
INTERNATIONAL ISO
STANDARD 6802
Fourth edition
2018-08
Rubber or plastics hoses and hose
assemblies — Hydraulic impulse test
with flexing
Tuyaux et flexibles en caoutchouc et en plastique renforcés par des fils
métalliques — Essai d'impulsions hydrauliques avec flexions
Reference number
ISO 6802:2018(E)
©
ISO 2018

---------------------- Page: 7 ----------------------

SIST EN ISO 6802:2019
ISO 6802:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 6802:2019
ISO 6802:2018(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Test methods . 1
5 Apparatus . 1
6 Test fluid . 4
7 Test piece . 4
8 Procedure. 5
9 Expression of results . 5
10 Test report . 5
Annex A (informative) Procedure for the optional cool down leakage test . 7
© ISO 2018 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 6802:2019
ISO 6802:2018(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document
...