SIST EN 61061-1:2007

SLOVENSKI STANDARD
SIST EN 61061-1:2007
01-november-2007
1DGRPHãþD
SIST EN 61061-1:2001
1HLPSUHJQLUDQL]JRãþHQLODPLQLUDQLOHV]DHOHNWULþQHQDPHQH±GHO'HILQLFLMH
R]QDNHLQVSORãQH]DKWHYH,(&
Non-impregnated densified laminated wood for electrical purposes -- Part 1: Definitions,
designation and general requirements (IEC 61061-1:2006)
Nicht-imprägniertes Kunstharzpressholz für elektrotechnische Zwecke -- Teil 1: Begriffe,
Bezeichnung und allgemeine Anforderungen (IEC 61061-1:2006)
Stratifiés de bois densifié, non imprégnés, a usages électriques -- Partie 1: Définitions,
désignation et prescriptions générales (IEC 61061-1:2006)
Ta slovenski standard je istoveten z: EN 61061-1:2006
ICS:
01.040.29 Elektrotehnika (Slovarji) Electrical engineering
(Vocabularies)
29.035.99 Drugi izolacijski materiali Other insulating materials
SIST EN 61061-1:2007 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61061-1

NORME EUROPÉENNE
December 2006
EUROPÄISCHE NORM

ICS 17.220.99; 29.035.01 Supersedes EN 61061-1:1998


English version


Non-impregnated densified laminated wood
for electrical purposes
Part 1: Definitions, designation and general requirements
(IEC 61061-1:2006)


Stratifiés de bois densifié, non imprégnés, Nicht-imprägniertes Kunstharzpressholz
à usages électriques für elektrotechnische Zwecke
Partie 1: Définitions, désignation Teil 1: Begriffe, Bezeichnung
et prescriptions générales und allgemeine Anforderungen
(CEI 61061-1:2006) (IEC 61061-1:2006)




This European Standard was approved by CENELEC on 2006-11-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61061-1:2006 E

---------------------- Page: 2 ----------------------

EN 61061-1:2006 - 2 -
Foreword
The text of document 15/343/FDIS, future edition 3 of IEC 61061-1, prepared by IEC TC 15, Solid
electrical insulating materials, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 61061-1 on 2006-11-01.
This European Standard supersedes EN 61061-1:1998.
The main changes from EN 61061-1:1998 are as follows:
– addition of application use and safety statements;
– redefinition of ring and sheet;
– appropriate additions to the subclauses;
– reformatting of text to bring it in line with current IEC document format.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-11-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61061-1:2006 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61061-1:2006
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

1) 2)
IEC 60296 - Fluids for electrotechnical applications - EN 60296 2004
Unused mineral insulating oils for + corr. September 2004
transformers and switchgear


1) 2)
IEC 61061-2 - Specification for non-impregnated, densified EN 61061-2 2001
laminated wood for electrical purposes + corr. February 2002
Part 2: Methods of test


IEC 61061-3 Series Non-impregnated densified laminated wood EN 61061-3 Series
for electrical purposes
Part 3: Specifications for individual materials




1)
Undated reference.
2)
Valid edition at date of issue.

---------------------- Page: 4 ----------------------

INTERNATIONAL IEC


STANDARD 61061-1





Third edition
2006-10


Non-impregnated densified laminated
wood for electrical purposes –
Part 1:
Definitions, designation and general requirements
© IEC 2006 ⎯ Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale G
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

---------------------- Page: 5 ----------------------

– 2 – 61061-1 © IEC:2006(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________

NON-IMPREGNATED DENSIFIED LAMINATED WOOD
FOR ELECTRICAL PURPOSES –

Part 1: Definitions, designation and general requirements


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61061-1 has been prepared by I
...