SIST EN 17832:2023
(Main)Thermal spraying - Determination of the feed rate with spray material in powder form in a production environment
Thermal spraying - Determination of the feed rate with spray material in powder form in a production environment
This document describes the procedure for the measurement of the feed rate for thermal spraying with spray materials in powder form in a production environment.
The application of this document is essential if information on the feed rate of a spray material in powder form is required when using a thermal spraying method.
It is applicable to any thermal spraying method using spray materials in powder form (see EN ISO 14917) where the technical installation used allows the spray powder to be fed through without an activated spray gun.
The determination of the feed rate is mandatory for the preparation of thermal spray procedure specifications in accordance with EN 17002 and the determination of the deposition efficiency in accordance with EN ISO 17836.
Thermisches Spritzen - Bestimmung der Förderrate von pulverförmigem Spritzmaterial unter Fertigungsbedingungen
Dieses Dokument beschreibt das Verfahren für die Messung der Förderrate beim thermischen Spritzen mit pulverförmigen Spritzmaterialien unter Produktionsbedingungen.
Die Anwendung dieses Dokuments ist von grundlegender Bedeutung, wenn bei Einsatz eines Verfahrens zum thermischen Spritzen Informationen zur Förderrate eines pulverförmigen Spritzmaterials benötigt werden.
Es gilt für alle Verfahren des thermischen Spritzens mit pulverförmigen Spritzmaterialien (siehe EN ISO 14917), bei denen die verwendete technische Anlage die Zuführung des Spritzpulvers ohne eine aktivierte Spritzpistole ermöglicht.
Die Bestimmung der Förderrate ist für die Vorbereitung der thermischen Spritzanweisungen in Übereinstimmung mit EN 17002 und für die Bestimmung der Auftragrate in Übereinstimmung mit EN ISO 17836 zwingend erforderlich.
Projection thermique - Détermination du débit de matière en projection thermique avec un matériau d’apport sous forme de poudre dans un environnement de production
Le présent document décrit le mode opératoire de mesurage du débit de matière lorsque la projection thermique est réalisée en utilisant des matériaux d’apport en poudre, dans un environnement de production.
Il est essentiel d’appliquer les dispositions du présent document si la mise en oeuvre de la méthode de projection thermique nécessite de disposer d’informations sur le débit de matière d’un matériau d’apport se présentant sous forme de poudre.
Le présent document est applicable à toutes les méthodes de projection thermique utilisant des matériaux d’apport sous forme de poudre (voir l’EN ISO 14917) lorsque l’installation technique utilisée permet d’effectuer l’alimentation en poudre de projection sans actionner de pistolet de projection.
Il est obligatoire de déterminer le débit de matière pour la préparation des spécifications du mode opératoire de projection thermique conformément à l’EN 17002 et pour la détermination du rendement de dépôt selon l'EN ISO 17836.
Vroče brizganje - Ugotavljanje hitrosti dovajanja s pršilom v obliki prahu v proizvodnem okolju
Ta dokument opisuje postopek merjenja hitrosti dovajanja pri vročem brizganju s pršilom v obliki prahu v proizvodnem okolju.
Dokument je treba uporabiti, če so za uporabo metode vročega brizganja zahtevne informacije o hitrosti dovajanja pršila v obliki prahu.
Uporablja se za vse metode vročega brizganja s pršilom v obliki prahu (glej standard EN ISO 14917), pri katerih uporabljena tehnična namestitev omogoča nanos pršila v obliki prahu brez aktivacije razpršilne pištole.
Ugotavljanje hitrosti dovajanja je obvezno pri pripravi specifikacij postopka vročega brizganja v skladu s standardom EN 17002 in ugotavljanju učinkovitosti nanosa za vroče brizganje v skladu s standardom EN ISO 17836.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 17832:2023
01-september-2023
Vroče brizganje - Ugotavljanje hitrosti dovajanja s pršilom v obliki prahu v
proizvodnem okolju
Thermal spraying - Determination of the feed rate with spray material in powder form in a
production environment
Thermisches Spritzen - Bestimmung der Förderrate von pulverförmigem Spritzmaterial
unter Fertigungsbedingungen
Projection thermique - Détermination du débit de matière en projection thermique avec
un matériau d’apport sous forme de poudre dans un environnement de production
Ta slovenski standard je istoveten z: EN 17832:2023
ICS:
25.220.20 Površinska obdelava Surface treatment
SIST EN 17832:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 17832:2023
---------------------- Page: 2 ----------------------
SIST EN 17832:2023
EN 17832
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2023
EUROPÄISCHE NORM
ICS 25.220.20
English Version
Thermal spraying - Determination of the feed rate with
spray material in powder form in a production
environment
Projection thermique - Détermination du débit de Thermisches Spritzen - Bestimmung der Förderrate
matière en projection thermique avec un matériau von pulverförmigem Spritzmaterial unter
d'apport sous forme de poudre dans un environnement Fertigungsbedingungen
de production
This European Standard was approved by CEN on 30 April 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17832:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 17832:2023
EN 17832:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Auxiliary materials . 6
4.1 Collecting vessel . 6
4.2 Powder injector . 7
4.3 Scales . 7
4.4 Stopwatch . 7
5 Preparation measurement . 7
5.1 Guidelines . 7
5.2 Determination of the time for stabilization of the
...
SLOVENSKI STANDARD
oSIST prEN 17832:2022
01-april-2022
Vroče brizganje - Ugotavljanje hitrosti dovajanja s pršilom v obliki prahu v
proizvodnem okolju
Thermal spraying - Determination of the feed rate with spray material in powder form in a
production environment
Thermisches Spritzen - Bestimmung der Förderrate von pulverförmigem Spritzmaterial
unter Fertigungsbedingungen
Projection thermique - Détermination du débit de matière en projection thermique avec
un matériau d’apport sous forme de poudre dans un environnement de production
Ta slovenski standard je istoveten z: prEN 17832
ICS:
25.220.20 Površinska obdelava Surface treatment
oSIST prEN 17832:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 17832:2022
---------------------- Page: 2 ----------------------
oSIST prEN 17832:2022
DRAFT
EUROPEAN STANDARD
prEN 17832
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2022
ICS 25.220.20
English Version
Thermal spraying - Determination of the feed rate with
spray material in powder form in a production
environment
Projection thermique - Détermination du débit de Thermisches Spritzen - Bestimmung der Förderrate
matière en projection thermique avec un matériau von pulverförmigem Spritzmaterial unter
d'apport sous forme de poudre dans un environnement Fertigungsbedingungen
de production
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 240.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17832:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 17832:2022
prEN 17832:2022 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Auxiliary materials . 6
4.1 Collecting vessel . 6
4.2 Powder injector . 7
4.3 Scales (minimum accuracy of 0,1 g) . 7
4.4 Stopwatch (minimum accuracy of 1 s) . 7
5 Preparation measurement .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.