SIST EN ISO 14920:2023
(Main)Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2023)
Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2023)
This document specifies the procedure for thermal spraying of self-fluxing alloys that are simultaneously or subsequently fused to create a homogeneous, diffusion-bonded coating.
Thermisches Spritzen - Spritzen und Einschmelzen von selbstfließenden Legierungen (ISO 14920:2023)
Dieses Dokument legt das Verfahren für thermisches Spritzen von selbstfließenden Legierungen fest, die gleichzeitig oder anschließend eingeschmolzen werden, um eine homogene diffusionsgebundene Schicht zu schaffen.
Projection thermique - Projection et fusion d'alliages autofondants (ISO 14920:2023)
Le présent document spécifie la méthode de projection thermique d’alliages autofondants qui sont fondus simultanément ou ultérieurement pour donner un revêtement homogène dont l’adhérence s’est opérée par diffusion.
Vroče brizganje (metalizacija) - Taljenje in brizganje - Vroče nanašanje samotaljivih zlitin (ISO 14920:2023)
Ta dokument določa postopek za vroče brizganje samotaljivih zlitin, ki so spojene sočasno ali naknadno, da nastane homogen difuzijsko vezan premaz.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 14920:2023
01-november-2023
Vroče brizganje (metalizacija) - Taljenje in brizganje - Vroče nanašanje samotaljivih
zlitin (ISO 14920:2023)
Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2023)
Thermisches Spritzen - Spritzen und Einschmelzen von selbstfließenden Legierungen
(ISO 14920:2023)
Projection thermique - Projection et fusion d'alliages autofondants (ISO 14920:2023)
Ta slovenski standard je istoveten z: EN ISO 14920:2023
ICS:
25.220.20 Površinska obdelava Surface treatment
SIST EN ISO 14920:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 14920:2023
---------------------- Page: 2 ----------------------
SIST EN ISO 14920:2023
EN ISO 14920
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2023
EUROPÄISCHE NORM
ICS 25.220.20 Supersedes EN ISO 14920:2015
English Version
Thermal spraying - Spraying and fusing of self-fluxing
alloys (ISO 14920:2023)
Projection thermique - Projection et fusion d'alliages Thermisches Spritzen - Spritzen und Einschmelzen von
autofondants (ISO 14920:2023) selbstfließenden Legierungen (ISO 14920:2023)
This European Standard was approved by CEN on 22 August 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14920:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 14920:2023
EN ISO 14920:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 14920:2023
EN ISO 14920:2023 (E)
European foreword
This document (EN ISO 14920:2023) has been prepared by Technical Committee ISO/TC 107 "Metallic
and other inorganic coatings" in collaboration with Technical Committee CEN/TC 240 “Thermal
spraying and thermally sprayed coatings” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2024, and conflicting national standards shall
be withdrawn at the latest by March 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 14920:2015.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 14920:2023 has been approved by CEN as EN ISO 14920:2023 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 14920:2023
---------------------- Page: 6 ----------------------
SIST EN ISO 14920:2023
INTERNATIONAL ISO
STANDARD 14920
Third edition
2023-08
Therm
...
SLOVENSKI STANDARD
oSIST prEN ISO 14920:2022
01-december-2022
Vroče brizganje (metalizacija) - Taljenje in brizganje - Vroče nanašanje samotaljivih
zlitin (ISO/DIS 14920:2022)
Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO/DIS 14920:2022)
Thermisches Spritzen - Spritzen und Einschmelzen von selbstfließenden Legierungen
(ISO/DIS 14920:2022)
Projection thermique - Projection et fusion d'alliages autofondants (ISO/DIS 14920:2022)
Ta slovenski standard je istoveten z: prEN ISO 14920
ICS:
25.220.20 Površinska obdelava Surface treatment
oSIST prEN ISO 14920:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 14920:2022
---------------------- Page: 2 ----------------------
oSIST prEN ISO 14920:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 14920
ISO/TC 107 Secretariat: KATS
Voting begins on: Voting terminates on:
2022-10-20 2023-01-12
Thermal spraying — Spraying and fusing of self-fluxing
alloys
Projection thermique — Projection et fusion d'alliages autofondants
ICS: 25.220.20
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 14920:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 3 ----------------------
oSIST prEN ISO 14920:2022
ISO/DIS 14920:2022(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 14920
ISO/TC 107 Secretariat: KATS
Voting begins on: Voting terminates on:
Thermal spraying — Spraying and fusing of self-fluxing
alloys
Projection thermique — Projection et fusion d'alliages autofondants
ICS: 25.220.20
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2022
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 14920:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
© ISO 2022 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 4 ----------------------
oSIST prEN ISO 14920:2022
ISO/DIS 14920:2022(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.