iTeh Standards logo
EURUSD
Your shopping cart is empty.
SIST

SIST IEC 60050-161:1999/A3:2017

(Amendment)

Amendment 3 - International Electrotechnical Vocabulary - Part 161: Electromagnetic compatibility

Amendment 3 - International Electrotechnical Vocabulary - Part 161: Electromagnetic compatibility

Amendement 3 - Vocabulaire Electrotechnique International - Partie 161: Compatibilité électromagnétique

Mednarodni elektrotehniški slovar - 161. del: Elektromagnetna združljivost - Dopolnilo A3

General Information

Status
Published
Publication Date
13-Mar-2017
ICS
01.040.29 - Electrical engineering (Vocabularies)
29.020 - Electrical engineering in general
33.100.01 - Electromagnetic compatibility in general
Technical Committee
TRM - Terminology
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
16-Feb-2017
Due Date
23-Apr-2017
Completion Date
14-Mar-2017
Ref Project
IEC 60050-161-am3 - Amendment 3 - International Electrotechnical Vocabulary - Part 161: Electromagnetic compatibility

Relations

Amends
SIST IEC 60050-161:1999 - International Electrotechnical Vocabulary. Chapter 161: Electromagnetic compatibility
Effective Date
06-Mar-2017
SIST IEC 60050-161:1999/A3:2017SIST IEC 60050-161:1999/A3:2017
PreviousNext
Amendment
SIST IEC 60050-161:1999/A3:2017
English and French language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-2017
Mednarodni elektrotehniški slovar - 161. del: Elektromagnetna združljivost -
Dopolnilo A3
Amendment 3 - International Electrotechnical Vocabulary - Part 161: Electromagnetic
compatibility
Amendement 3 - Vocabulaire Electrotechnique International - Partie 161: Compatibilité
électromagnétique
Ta slovenski standard je istoveten z: IEC 60050-161-am3
ICS:
01.040.29 Elektrotehnika (Slovarji) Electrical engineering
(Vocabularies)
29.020 Elektrotehnika na splošno Electrical engineering in
general
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

IEC 60050-161 ®
Edition 1.0  2014-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 3
AM ENDEMENT 3
International Electrotechnical Vocabulary –

Part 161: Electromagnetic compatibility

Vocabulaire Electrotechnique International –

Partie 161: Compatibilité électromagnétique

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX A
ICS 01.040.29; 29.020; 33.100 ISBN 978-2-8322-1624-8

– II – IEC 60050-161/AMD3:2014 © IEC 2014

FOREWORD
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

SIST
SIST IEC 60050-161:1999/A6:2022(Amendment)
International electrotechnical vocabulary - Part 161: Electromagnetic compatibility
IEC 60050-161:1990/AMD6:2016
  • Standard
    3 pages
    English and French language
    sale 15% off
  • Amendment
    4 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST IEC 60050-161:1999/A4:2017(Amendment)
Amendment 4 - International Electrotechnical Vocabulary - Part 161: Electromagnetic compatibility
IEC 60050-161-am4
  • Amendment
    4 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST IEC 60050-161:1999/A5:2017(Amendment)
Amendment 5 - International Electrotechnical Vocabulary - Chapter 161: Electromagnetic compatibility
IEC 60050-161-am5
  • Amendment
    3 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST IEC 60050-161:1999(Main)
International Electrotechnical Vocabulary. Chapter 161: Electromagnetic compatibility
IEC 60050-191:1990/AMD2:2002

Replaces IEC 60050(902) (1973). It has the status of a horizontal standard in accordance with IEC Guide 108.

  • Standard
    12 pages
    English and French language
    sale 15% off
  • Standard – translation
    42 pages
    Slovenian, English, German and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 5577:2026(Main)
Non-destructive testing - Ultrasonic testing - Vocabulary (ISO 5577:2025)
EN ISO 5577:2025

This document defines the terms used in ultrasonic non-destructive testing and forms a common basis for standards and general use.
This document does not cover specific terms used in ultrasonic testing with arrays.
NOTE            Terms used in ultrasonic testing with arrays are defined in ISO 23243.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 2719:2026(Main)
Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2025)
EN ISO 2719:2025

This document specifies three procedures, A, B and C, using the Pensky-Martens closed cup tester, for determining the flash point of combustible liquids, liquids with suspended solids, liquids that tend to form a surface film under the test conditions, biodiesel and other liquids in the temperature range of 40 °C to 370 °C.
NOTE 1        Although, technically, kerosene with a flash point above 40 °C can be tested using this document, it is standard practice to test kerosene according to ISO 13736.[5] Similarly, lubricating oils are normally tested according to ISO 2592.[2]
Procedure A is applicable to distillate fuels (diesel, biodiesel blends, heating oil and turbine fuels), new and in-use lubricating oils, paints and varnishes, and other homogeneous liquids not included in the scope of procedures B or C.
Procedure B is applicable to residual fuel oils, cutback residuals, used lubricating oils, mixtures of liquids with solids, and liquids that tend to form a surface film under test conditions or are of such kinematic viscosity that they are not uniformly heated under the stirring and heating conditions of procedure A.
Procedure C is applicable to fatty acid methyl esters (FAME) as specified in specifications such as EN 14214[11] or ASTM D6751.[13]
This document is not applicable to water-borne paints and varnishes.
NOTE 2        Water-borne paints and varnishes can be tested using ISO 3679.[3] Liquids containing traces of highly volatile materials can be tested using ISO 1523[1] or ISO 3679.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18862:2026(Main)
Coffee and coffee products - Determination of acrylamide - Methods using high-performance liquid chromatography with tandem mass spectrometric detection (HPLC-MS/MS) and gas chromatography with mass spectrometric detection (GC-MS) after derivatization (ISO 18862:2025)
EN ISO 18862:2025

This document specifies methods for the determination of acrylamide in coffee and coffee products by extraction with water, clean-up by solid-phase extraction (SPE) and determination by high-performance liquid chromatography with tandem mass spectrometric detection (HPLC-MS/MS) and gas chromatography with mass spectrometric detection (GC-MS) after derivatization. The methods were validated in a validation study for roasted coffee, soluble coffee, coffee substitutes and coffee products with ranges from 53 μg/kg to 612,1 μg/kg.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 18227:2026(Main)
Automotive fuels - E20 petrol - Requirements and test methods
CEN/TS 18227:2025

This document specifies requirements and test methods for E20 petrol marketed and delivered as such, containing a minimum oxygen content of 3,7 % (m/m) and a maximum of 8,0 % (m/m). The fuel has a maximum of 20,0 % (V/V) ethanol.
It is applicable to fuel for use in spark-ignition petrol-fuelled engines and vehicles.
This document is complementary to EN 228, which describes unleaded petrol containing an oxygen content up to 3,7 % (m/m) and a maximum ethanol content of 10 % (V/V).
NOTE 1   For general petrol engine vehicle warranty, E20 petrol might not be suitable for all vehicles and it is advised that the recommendations of the vehicle manufacturer are consulted before use. E20 petrol might need a validation step to confirm the compatibility of the fuel with the vehicle, which for some existing engines might still be needed.
NOTE 2   For the purposes of this document, the terms “% (m/m)” and “% (V/V)” are used to represent respectively the mass fraction, µ, and the volume fraction, φ.

  • Technical specification
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 80601-2-70:2026(Main)
Medical electrical equipment - Part 2-70: Particular requirements for basic safety and essential performance of sleep apnoea breathing therapy equipment (ISO 80601-2-70:2025)
EN ISO 80601-2-70:2025

This document is applicable to the basic safety and essential performance of sleep apnoea breathing therapy equipment, hereafter referred to as ME equipment, intended to alleviate the symptoms of patients who suffer from obstructive sleep apnoea by delivering a therapeutic breathing pressure to the respiratory tract of the patient. Sleep apnoea breathing therapy equipment is intended for use in the home healthcare environment by lay operators as well as in professional healthcare institutions.
Sleep apnoea breathing therapy equipment is not considered to utilize a physiologic closed-loop-control system unless it uses a physiological patient variable to adjust the therapy settings.
This document excludes sleep apnoea breathing therapy equipment intended for use with neonates.
This document is applicable to ME equipment or an ME system intended for those patients who are not dependent on artificial ventilation. This document is not applicable to ME equipment or an ME system intended for those patients who are dependent on artificial ventilation such as patients with central sleep apnoea.
This document is also applicable to those accessories intended by their manufacturer to be connected to sleep apnoea breathing therapy equipment, where the characteristics of those accessories can affect the basic safety or essential performance of the sleep apnoea breathing therapy equipment.
Masks and application accessories intended for use during sleep apnoea breathing therapy are additionally addressed by ISO 17510. Refer to Figure AA.1 for items covered further under this document.
If a clause or subclause is specifically intended to be applicable to ME equipment only, or to ME systems only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME equipment and to ME systems, as relevant.
Hazards inherent in the intended physiological function of ME equipment or ME systems within the scope of this document are not covered by specific requirements in this document except in 7.2.13 and 8.4.1 of the general standard.
NOTE 2        See also 4.2 of the general standard.
This document does not specify the requirements for:
–    ventilators or accessories intended for critical care ventilators for ventilator-dependent patients, which are given in ISO 80601‑2‑12.
–    ventilators or accessories intended for anaesthetic applications, which are given in ISO 80601-2-13.
–    ventilators or accessories intended for home care ventilators for ventilator-dependent patients, which are given in ISO 80601-2-72.
–    ventilators or accessories intended for emergency and transport, which are given in ISO 80601-2-84.
–    ventilators or accessories intended for home-care ventilatory support, which are given in ISO 80601‑2-79 and ISO 80601‑2‑80.
–    high-frequency ventilators[23], which are given in ISO 80601-2-87.
–    respiratory high flow equipment, which are given in ISO 80601‑2‑90;
NOTE 3      ISO 80601-2-80 ventilatory support equipment can incorporate high-flow therapy operational mode, but such a mode is only for spontaneously breathing patients.
–    user-powered resuscitators, which are given in ISO 10651-4;
–    gas-powered emergency resuscitators, which are given in ISO 10651-5;
–    oxygen therapy constant flow ME equipment; and
–    cuirass or “iron-lung” ventilation equipment.

  • Standard
    89 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15016-2:2023+A1:2026(Main + Amendment)
Railway applications - Technical documents - Part 2: Parts lists
EN 15016-2:2023+A1:2025

This document specifies the preparation and reproduction of design parts. This document defines the basic principles and structure of design parts lists. This document is applicable to all design parts lists for railway applications.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day