SIST EN ISO 4172:2024

SLOVENSKI STANDARD
01-junij-2024
Nadomešča:
SIST EN ISO 4172:1998
Tehnična dokumentacija izdelkov - Gradbena dokumentacija - Sestavne risbe
montažnih konstrukcij (ISO 4172:2024)
Technical product documentation (TPD) - Construction documentation - Drawings for the
assembly of prefabricated structures (ISO 4172:2024)
Technische Produktdokumentation (TPD) - Baukonstruktionszeichnungen - Zeichnungen
für den Zusammenbau vorgefertigter Teile (ISO 4172:2024)
Documentation technique de produits (DTP) - Documentation de construction - Dessins
d'assemblage des structures préfabriquées (ISO 4172:2024)
Ta slovenski standard je istoveten z: EN ISO 4172:2024
ICS:
01.100.30 Gradbeni načrti Construction drawings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 4172
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2024
EUROPÄISCHE NORM
ICS 01.100.30 Supersedes EN ISO 4172:1996
English Version
Technical product documentation (TPD) - Construction
documentation - Drawings for the assembly of
prefabricated structures (ISO 4172:2024)
Documentation technique de produits (DTP) - Technische Produktdokumentation (TPD) -
Documentation de construction - Dessins d'assemblage Baukonstruktionszeichnungen - Zeichnungen für den
des structures préfabriquées (ISO 4172:2024) Zusammenbau vorgefertigter Teile (ISO 4172:2024)
This European Standard was approved by CEN on 13 March 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4172:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 4172:2024) has been prepared by Technical Committee ISO/TC 10 "Technical
product documentation" in collaboration with CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2024, and conflicting national standards
shall be withdrawn at the latest by September 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 4172:1996.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 4172:2024 has been approved by CEN as EN ISO 4172:2024 without any modification.

International
Standard
ISO 4172
Third edition
Technical product documentation
2024-03
(TPD) — Construction
documentation — Drawings for
the assembly of prefabricated
structures
Documentation technique de produits (DTP) — Documentation
de construction — Dessins d'assemblage des structures
préfabriquées
Reference number
ISO 4172:2024(en) © ISO 2024
ISO 4172:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 4172:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Documentation . 2
4.1 General .2
4.1.1 Types of drawings and documents .2
4.1.2 Application of lines .2
4.1.3 Presentation of dimensions .3
4.1.4 Indications of tolerances and limit deviations .3
4.1.5 Instructional information .3
4.2 General arrangement drawings .3
4.2.1 General .3
4.2.2 Presentation .3
4.2.3 Views and scales .4
4.2.4 Indication of designations .4
4.2.5 Presentation of underground structures .4
4.3 Assembly drawings .10
4.3.1 General .10
4.3.2 Presentation .10
4.3.3 Views and scales .11
4.3.4 Indication of designations .11
4.4 Component drawings .11
4.4.1 General .11
4.4.2 Presentation . 12
4.4.3 Views and scales . 12
4.4.4 Indication of designation codes . 12
4.5 Detail drawings. 12
4.5.1 General . 12
4.5.2 Presentation . 12
4.5.3 Views and scales .14
4.5.4 Indications of limit deviations.14
4.6 Component schedules and parts list .14
4.6.1 General .14
4.6.2 Presentation .14
4.7 Specifications . 15
5 Designations .15
5.1 General . 15
5.2 Representation of simplified designations . 15
Bibliography . 17

iii
ISO 4172:2024(en)
Foreword
ISO (the International Organization for Standard
...