SIST EN 12697-8:2019

SLOVENSKI STANDARD
SIST EN 12697-8:2019
01-marec-2019
1DGRPHãþD
SIST EN 12697-8:2004
QRVWLYRWOLQY%LWXPHQVNH]PHVL3UHVNXVQHPHWRGHGHO8JRWDYOMDQMH]QDþLO
ELWXPHQVNLKSUHVNXãDQFLK
Bituminous mixtures - Test methods - Part 8: Determination of void characteristics of
bituminous specimens
Asphalt - Prüfverfahren - Teil 8: Bestimmung von volumetrischen Charakteristiken von
Asphalt-Probekörpern
Mélanges bitumineux - Méthodes d'essai - Partie 8 : Détermination des pourcentages de
vides caractéristiques des éprouvettes bitumineuses
Ta slovenski standard je istoveten z: EN 12697-8:2018
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
SIST EN 12697-8:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 12697-8:2019

---------------------- Page: 2 ----------------------

SIST EN 12697-8:2019


EN 12697-8
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2018
EUROPÄISCHE NORM
ICS 93.080.20 Supersedes EN 12697-8:2003
English Version

Bituminous mixtures - Test methods - Part 8:
Determination of void characteristics of bituminous
specimens
Matériaux enrobés - Méthodes d'essai - Partie 8: Asphalt - Prüfverfahren - Teil 8: Bestimmung von
Détermination de la teneur en vides caractéristiques volumetrischen Charakteristiken von Asphalt-
des matériaux bitumineux Probekörpern
This European Standard was approved by CEN on 9 November 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12697-8:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 12697-8:2019
EN 12697-8:2018 (E)
Contents Page
European foreword . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Determination of the air voids content (V ) . 6
a
4.1 Principle . 6
4.2 Calculation . 6
4.3 Precision . 7
4.4 Test report . 7
5 Determination of the percentage of the voids in the mineral aggregate filled with
binder . 7
5.1 Principle . 7
5.1.1 Mixtures without additives (VFB) . 7
5.1.2 Mixtures with additives (VFB ) . 7
ad
5.2 Calculation . 8
5.2.1 Mixtures without additives. 8
5.2.2 Mixtures with additives . 8
5.3 Precision . 9
5.4 Test report . 9

2

---------------------- Page: 4 ----------------------

SIST EN 12697-8:2019
EN 12697-8:2018 (E)
European foreword
This document (EN 12697-8:2018) has been prepared by Technical Committee CEN/TC 227 “Road
materials”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2019 and conflicting national standards shall be
withdrawn at the latest by June 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 12697-8:2003.
The following is a list of significant technical changes since the previous edition:
— The series title no longer makes the method exclusively for hot mix asphalt;
— [General] For clarity, “v/v” and “m/m” is replaced by “by volume” and “by mass”;
— [General] Change of indices in symbols for void content, binder density and binder content;
— [1] clarification that specimens cut from the pavement or from laboratory compacted slabs can be
by either coring or sawing;
— [2] EN 12697-7 added. Also in [4.3];
— [3.3] The term “bituminous material” amended to “bituminous mixture” to be in line with other
parts;
— [3.6] New term and definition of VMA inserted (void including additives in the mineral aggregate).
ad
Following sub-clause renumbered;
— [3.8] New term and definition of VFB inserted (voids filled with binder and additives;
ad
— [4.1] clarification added in for mixtures with water in their composition that the bulk density refers
to its dry bulk density;
— [4.2] Excessive text: “% by volume” deleted in Formula (1);
— [4.2] Key for V : The word “mixture” is replaced with “bituminous specimen” to be in line with
a
definition [3. 2] and [4.1] Principle;
3 3
— [4.2] and [5.2] Change of units from kg/m into Mg/m ;
— [4.3] Formula (2) including related text deleted for consistency with other parts. Following
formulas renumbered accordingly;
— [5.1] Principle for mixtures without additives now described in new sub-clause [5.1.1]. New sub-
clause added for mixtures with additives [5.1.2];
— [5.2] Calculation for mixtures without additives now described in new sub-clause [5.2.1]. New sub-
clause added for calculation of mixtures with additives [5.2.2];
3

---------------------- Page: 5 ----------------------

SIST EN 12697-8:2019
EN 12697-8:2018 (E)
— [5.2.2] Excessive text: “%” deleted in Formula (4);
— [5.4] dimension of specimen to the nearest 0,1 mm (if measured) added to results.
A list of all parts in the EN 12697 series can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav
...