SIST EN IEC 60335-2-13:2027
(Main)Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances (IEC 60335-2-13:2021)
- Abstract
This European Standard deals with the safety of electric deep fat fryers having a recommended maximum quantity of oil not exceeding 5 l, frying pans, woks and other appliances in which oil is used for cooking, and intended for household use and similar use, their rated voltage being not more than 250 V.
- Status
- Not Published
- Public Enquiry End Date
- 30-Jul-2024
- Technical Committee
- VGA - Safety of household and similar electrical appliances
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 19-Nov-2026
- Due Date
- 24-Jan-2027
SIST EN IEC 60335-2-13:2027 is the Slovenian standard for the safety of household and similar electric deep fat fryers, frying pans, woks and similar oil-cooking appliances. It sets particular safety requirements for appliances with rated voltage up to 250 V, and for deep fat fryers with a recommended maximum oil quantity not exceeding 5 l.
The document is used by manufacturers, test laboratories, certification bodies and buyers who need to check whether these appliances meet the safety requirements for household and similar use.
What does SIST EN IEC 60335-2-13:2027 specify?
SIST EN IEC 60335-2-13:2027 specifies the particular safety requirements for deep fat fryers, frying pans, woks and similar appliances used for cooking with oil. It supplements the general requirements of IEC 60335-1 and applies to household use and similar use, including use by laymen in shops, light industry and farms.
The standard is organized like a Part 2 of the IEC 60335 series. It covers Scope, normative references, terms and definitions, general requirements, test conditions, classification, marking and instructions, the main safety tests, construction requirements, and an annex structure carried over from Part 1.
The scope excludes several appliance categories that are handled elsewhere, including commercial deep fat fryers, commercial multi-purpose cooking pans, appliances for special environmental conditions such as corrosive or explosive atmospheres, and battery-operated appliances.
What are the key requirements of SIST EN IEC 60335-2-13:2027?
The standard is mainly about preventing burns, overheating, leakage, mechanical failure and unsafe cleaning conditions. In practice, it tells manufacturers what to mark, what to test, and how to prove that the appliance remains safe in normal use and in foreseeable abnormal operation.
- Clause 1, Scope - The appliance must fall within the defined product range and voltage range. This matters because the safety tests and construction rules are written for oil-cooking appliances of this type, not for commercial or battery-operated products.
- Clause 3, normal operation - The standard defines how deep fat fryers, frying pans and woks are operated during testing, including the oil type, oil level and target operating temperature. This gives laboratories a repeatable test condition, so results are comparable between products.
- Clause 5, test samples - Three additional samples are required for the immersion-related test in 15.101. That matters because the document expects destructive or extended testing on separate units, not on a single sample only.
- Clause 7, marking and instructions - Appliances with hot accessible surfaces must carry a hot-surface warning, deep fat fryers must show the maximum oil level and usually the minimum oil level, and cleaning limits must be marked where immersion is allowed. The instructions must cover cleaning, the correct connector where a thermostat is built into the connector, the ban on external timers or remote-control systems, and the intended household and similar applications.
- Clause 11, heating - The document limits oil temperature and temperature rise on accessible surfaces, and Table 101 sets the surface temperature-rise limits for specific materials. This is the core burn-prevention requirement, because it keeps the outside of the appliance within controlled limits during normal use and repeat operation.
- Clause 15, moisture resistance - Appliances intended for partial or complete immersion for cleaning must pass immersion, drying, leakage-current and electric-strength tests, and their insulation must not retain liquid in a way that reduces clearances or creepage distances. This matters for cleaning safety, because the appliance must not become electrically unsafe after washing.
- Clause 19, abnormal operation - Deep fat fryers with capillary thermal cut-outs and models with detachable heating elements receive extra abnormal-operation tests, while frying pans have their own test conditions. The document also sets maximum oil and surface temperatures under these abnormal situations, so a fault does not create an excessive hazard.
- Clause 22 and Clause 24 - Handles must stay secure under load at operating temperature, thermal controls are not allowed in certain connectors, and some thermal cut-outs must not be self-resetting. These requirements address practical risks such as lifting failure, connector overheating and unsafe automatic restart.
What terms does SIST EN IEC 60335-2-13:2027 define?
SIST EN IEC 60335-2-13:2027 uses a small set of key defined terms and test notions that shape how the appliance is judged.
- Functional surface - A surface intentionally heated by an internal heat source and required to be hot for the appliance to perform its intended function.
- Normal operation - The test condition used for each appliance type, including the oil fill level and temperature target specified for that type.
- Deep fat fryer - In this standard, an appliance designed for cooking in oil and, for the safety scope, limited to a recommended maximum oil quantity not exceeding 5 l.
- Frying pan - An appliance in the scope that cooks with oil on a heated surface rather than in a deep oil bath.
- Wok - A similar oil-cooking appliance that is tested under the same type of operating conditions as frying pans.
- IEC 60417-5041 - The symbol used for the hot-surface warning when the marking requirement applies.
- IEC 60320-1 - The appliance-coupler standard used when the appliance uses a connector with a thermostat, thermal cut-out or fuse.
Who uses SIST EN IEC 60335-2-13:2027?
SIST EN IEC 60335-2-13:2027 is used by appliance manufacturers designing deep fat fryers, frying pans, woks and related products for household and similar markets. It is also used by test laboratories running heating, immersion, abnormal-operation and construction tests, and by conformity-assessment bodies checking safety documentation and product samples.
Quality managers and buyers use it to confirm that product markings, instructions, connectors, handles and temperature behavior match the expected safety level before release or purchase.
What changed in SIST EN IEC 60335-2-13:2027 from the previous edition?
The document replaces EN 60335-2-13:2010 and its amendments and corrigenda. The referenced IEC edition states that the seventh edition is a technical revision and highlights these changes relative to the previous edition:
- alignment with IEC 60335-1:2020;
- some notes converted into normative text in several clauses;
- exclusion of battery-operated appliances;
- an additional test to limit the temperature rise of external accessible surfaces, including hot-surface marking.
Which standards are used with SIST EN IEC 60335-2-13:2027?
- IEC 60335-1 - the general safety requirements that this Part 2 supplements and modifies.
- IEC 60320-1:2021 - the appliance-coupler requirements used when the appliance has a connector with thermostat, thermal cut-out or fuse.
- IEC 60584-1 - the thermocouple specification used for temperature measurement in the surface-temperature probe.
- prEN IEC 60335-2-13:2024/prAA:2024 - the draft companion text to which this document is read in conjunction, including EU legislation links through its informative annexes.
- IEC 60335-2-37 and IEC 60335-2-39 - cited in the bibliography as the standards covering the commercial appliances excluded from this scope.
What does the SIST EN IEC 60335-2-13:2027 document contain?
The document contains the usual Part 2 structure built on IEC 60335-1, with special requirements added for oil-cooking appliances. It includes a dedicated surface-temperature probe in Figure 101 and a temperature-rise table for external accessible surfaces in Table 101.
It also contains detailed test methods for normal heating, repeated operation, immersion cleaning, abnormal operation and handle loading. Those methods are intended for design verification, type testing and conformity assessment, so the safety claims are based on measured behavior rather than on appearance alone.
The annex structure follows Part 1, with Annex B on battery-operated appliances marked as not applicable here.
Relations
- Effective Date
- 01-Jan-2027
- Effective Date
- 01-Jan-2027
- Effective Date
- 01-Jan-2027
- Effective Date
- 03-Feb-2026
- Refers
SIST EN 60584-1:2014 - Thermocouples - Part 1: EMF specifications and tolerances (IEC 60584-1:2013) - Effective Date
- 03-Feb-2026
- Effective Date
- 17-Nov-2026
- Effective Date
- 17-Nov-2026
- Effective Date
- 17-Nov-2026
- Effective Date
- 01-Jan-2027
Get Certified
Connect with accredited certification bodies for this standard
CIS Institut d.o.o.
Personal Protective Equipment (PPE) certification body. Notified Body NB-2890 for EU Regulation 2016/425 PPE.

Kiwa BDA Testing
Building and construction product certification.
Kmetijski inštitut Slovenije
Agricultural Institute of Slovenia. Soil testing, plant health, agricultural product analysis.
Sponsored listings
Frequently Asked Questions
SIST EN IEC 60335-2-13:2027 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances (IEC 60335-2-13:2021)". This standard covers: This European Standard deals with the safety of electric deep fat fryers having a recommended maximum quantity of oil not exceeding 5 l, frying pans, woks and other appliances in which oil is used for cooking, and intended for household use and similar use, their rated voltage being not more than 250 V.
This European Standard deals with the safety of electric deep fat fryers having a recommended maximum quantity of oil not exceeding 5 l, frying pans, woks and other appliances in which oil is used for cooking, and intended for household use and similar use, their rated voltage being not more than 250 V.
SIST EN IEC 60335-2-13:2027 is classified under the following ICS (International Classification for Standards) categories: 13.120 - Domestic safety; 97.040.50 - Small kitchen appliances. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN IEC 60335-2-13:2027 has the following relationships with other standards: It is inter standard links to SIST EN 60335-2-13:2011, SIST EN 60335-2-13:2011/A11:2012, SIST EN 60335-2-13:2011/A1:2019, SIST EN IEC 60320-1:2022, SIST EN 60584-1:2014, SIST EN 12976-1:2022, SIST EN 12976-1:2017, SIST-TS CLC IEC/TS 63457-1:2026, SIST EN IEC 60335-2-13:2027/A11:2027. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN IEC 60335-2-13:2027 is associated with the following European legislation: EU Directives/Regulations: 2014/35/EU, 2014/53/EU; Standardization Mandates: M/511, M/536. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN IEC 60335-2-13:2027 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 60335-2-13:2024
01-julij-2024
Gospodinjski in podobni električni aparati - Varnost - 2-13. del: Posebne zahteve
za cvrtnike, ponve za cvrtje in podobne aparate
Household and similar electrical appliances - Safety - Part 2-13: Particular requirements
for deep fat fryers, frying pans and similar appliances
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-13:
Besondere Anforderungen für Frittiergeräte, Bratpfannen und ähnliche Geräte
Appareils électrodomestiques et analogues - Sécurité - Partie 2-13: Exigences
particulières pour les friteuses, les poêles à frire et appareils analogues
Ta slovenski standard je istoveten z: prEN IEC 60335-2-13:2024
ICS:
13.120 Varnost na domu Domestic safety
97.040.50 Majhni gospodinjski aparati Small kitchen appliances
oSIST prEN IEC 60335-2-13:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN IEC 60335-2-13:2024
oSIST prEN IEC 60335-2-13:2024
EUROPEAN STANDARD DRAFT
prEN IEC 60335-2-13
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2024
ICS 13.120; 97.040.50 Will supersede EN 60335-2-13:2010; EN 60335-2-
13:2010/A11:2012; EN 60335-2-13:2010/A1:2019
English Version
Household and similar electrical appliances - Safety - Part 2-13:
Particular requirements for deep fat fryers, frying pans and
similar appliances
(IEC 60335-2-13:2021)
Appareils électrodomestiques et analogues - Sécurité - Sicherheit elektrischer Geräte für den Hausgebrauch und
Partie 2-13: Exigences particulières pour les friteuses, les ähnliche Zwecke - Teil 2-13: Besondere Anforderungen für
poêles à frire et appareils analogues Frittiergeräte, Bratpfannen und ähnliche Geräte
(IEC 60335-2-13:2021) (IEC 60335-2-13:2021)
This draft European Standard is submitted to CENELEC members for enquiry.
Deadline for CENELEC: 2024-08-16.
The text of this draft consists of the text of IEC 60335-2-13:2021.
If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 78887 Ref. No. prEN IEC 60335-2-13:2024 E
oSIST prEN IEC 60335-2-13:2024
prEN IEC 60335-2-13:2024 (E)
1 European foreword
2 This document (prEN IEC 60335-2-13:2024) consists of the text of IEC 60335-2-13:2021 prepared by
3 IEC/TC 61 "Safety of household and similar electrical appliances".
4 This document is currently submitted to the Enquiry.
5 The following dates are proposed:
• latest date by which the existence of this (doa) dor + 6 months
document has to be announced at national
level
• latest date by which this document has to be (dop) dor + 12 months
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) dor + 36 months
conflicting with this document have to be (to be confirmed or
withdrawn modified when voting)
6 This document is read in conjunction with prEN IEC 60335-2-13:2024/prAA:2024.
7 This document will supersede EN 60335-2-13:2010 and all of its amendments and corrigenda (if any).
8 This document has been prepared under a standardization request addressed to CENELEC by the European
9 Commission. The Standing Committee of the EFTA State subsequently approves these requests for its
10 Member States.
11 For relationship with EU legislation, see informative Annexes ZZA and ZZC, which are an integral part of
12 prEN IEC 60335-2-13:2024/prAA:2024.
oSIST prEN IEC 60335-2-13:2024
IEC 60335-2-13 ®
Edition 7.0 2021-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Household and similar electrical appliances – Safety –
Part 2-13: Particular requirements for deep fat fryers, frying pans and similar
appliances
Appareils électrodomestiques et analogues – Sécurité –
Partie 2-13: Exigences particulières pour les friteuses, les poêles à frire et
appareils analogues
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 13.120; 97.040.50 ISBN 978-2-8322-1044-4
oSIST prEN IEC 60335-2-13:2024
– 2 – IEC 60335-2-13:2021 © IEC 2021
CONTENTS
FOREWORD . 4
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 9
3 Terms and definitions . 9
4 General requirement . 9
5 General conditions for the tests . 9
6 Classification . 10
7 Marking and instructions . 10
8 Protection against access to live parts . 11
9 Starting of motor-operated appliances . 11
10 Power input and current . 11
11 Heating . 11
12 Charging of metal-ion batteries . 13
13 Leakage current and electric strength at operating temperature . 13
14 Transient overvoltages . 13
15 Moisture resistance . 13
16 Leakage current and electric strength . 14
17 Overload protection of transformers and associated circuits . 14
18 Endurance . 14
19 Abnormal operation . 14
20 Stability and mechanical hazards . 15
21 Mechanical strength . 15
22 Construction . 15
23 Internal wiring . 16
24 Components . 16
25 Supply connection and external flexible cords . 16
26 Terminals for external conductors . 16
27 Provision for earthing . 17
28 Screws and connections . 17
29 Clearances, creepage distances and solid insulation . 17
30 Resistance to heat and fire . 17
31 Resistance to rusting . 17
32 Radiation, toxicity and similar hazards . 17
Annexes . 18
Annex B (normative) Battery-operated appliances, separable batteries and detachable
batteries for battery-operated appliances . 19
Bibliography . 20
Figure 101 – Probe for measuring surface temperatures . 17
oSIST prEN IEC 60335-2-13:2024
IEC 60335-2-13:2021 © IEC 2021 – 3 –
Table 101 – Maximum temperature rises for specified external surfaces under normal
operating conditions . 13
oSIST prEN IEC 60335-2-13:2024
– 4 – IEC 60335-2-13:2021 © IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-13: Particular requirements for deep fat fryers,
frying pans and similar appliances
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC 60335-2-13 has been prepared by IEC technical committee 61: Safety of household and
similar electrical appliances. It is an International Standard.
This seventh edition cancels and replaces the sixth edition published in 2009 and
Amendment 1:2016. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) the text has been aligned with IEC 60335-1:2020;
b) some notes have been converted to normative text (Clause 1, 5.2, 5.101, 7.12, 15.101,
22.35, 24.1.5);
c) exclusion of battery-operated appliances (Clause 1);
d) an additional test has been introduced to limit the temperature rise of external accessible
surfaces including marking of hot surfaces (Clause 7, Clause 11).
oSIST prEN IEC 60335-2-13:2024
IEC 60335-2-13:2021 © IEC 2021 – 5 –
The text of this International Standard is based on the following documents:
Draft Report on voting
61/6381/FDIS 61/6431/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/standardsdev/publications.
A list of all parts in the IEC 60335 series, published under the general title Household and
similar electrical appliances – Safety, can be found on the IEC website.
This Part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its
amendments unless that edition precludes it; in that case, the latest edition that does not
preclude it is used. It was established on the basis of the sixth edition (2020) of that standard.
NOTE 1 When "Part 1" is mentioned in this standard, it refers to IEC 60335-1.
This Part 2 supplements or modifies the corresponding clauses in IEC 60335-1, so as to convert
that publication into the IEC standard: Particular requirements for deep fat fryers, frying pans
and similar appliances.
When a particular subclause of Part 1 is not mentioned in this Part 2, that subclause applies as
far as is reasonable. When this standard states "addition", "modification" or "replacement", the
relevant text in Part 1 is to be adapted accordingly.
NOTE 2 The following numbering system is used:
– subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;
– unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including
those in a replaced clause or subclause;
– additional annexes are lettered AA, BB, etc.
NOTE 3 The following print types are used:
− requirements: in roman type;
− test specifications: in italic type;
− notes: in small roman type.
Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the
associated noun are also in bold.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/standardsdev/publications.
oSIST prEN IEC 60335-2-13:2024
– 6 – IEC 60335-2-13:2021 © IEC 2021
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
NOTE 4 The attention of National Committees is drawn to the fact that equipment manufacturers and testing
organizations may need a transitional period following publication of a new, amended or revised IEC publication in
which to make products in accordance with the new requirements and to equip themselves for conducting new or
revised tests.
It is the recommendation of the committee that the content of this publication be adopted for implementation nationally
not earlier than 12 months or later than 36 months from the date of publication.
oSIST prEN IEC 60335-2-13:2024
IEC 60335-2-13:2021 © IEC 2021 – 7 –
INTRODUCTION
It has been assumed in the drafting of this International Standard that the execution of its
provisions is entrusted to appropriately qualified and experienced persons.
Guidance documents concerning the application of the safety requirements for appliances can
be accessed via TC 61 supporting documents on the IEC website
https://www.iec.ch/tc61/supportingdocuments
This information is given for the convenience of users of this International Standard and does
not constitute a replacement for the normative text in this standard.
This standard recognizes the internationally accepted level of protection against hazards such
as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal
use taking into account the manufacturer's instructions. It also covers abnormal situations that
can be expected in practice and takes into account the way in which electromagnetic
phenomena can affect the safe operation of appliances.
This standard takes into account the requirements of IEC 60364 as far as possible so that there
is compatibility with the wiring rules when the appliance is connected to the supply mains.
However, national wiring rules may differ.
If an appliance within the scope of this standard also incorporates functions that are covered
by another Part 2 of IEC 60335, the relevant Part 2 is applied to each function separately, as
far as is reasonable. If applicable, the influence of one function on the other is taken into
account.
When a Part 2 standard does not include additional requirements to cover hazards dealt with
in Part 1, Part 1 applies.
NOTE 1 This means that the technical committees responsible for the Part 2 standards have determined that it is
not necessary to specify particular requirements for the appliance in question over and above the general
requirements.
This standard is a product family standard dealing with the safety of appliances and takes
precedence over horizontal and generic standards covering the same subject.
NOTE 2 Horizontal publications, basic safety publications and group safety publications covering a hazard are not
applicable since they have been taken into consideration when developing the general and particular requirements
for t
...



