iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 11890-2:2020/kFprA1:2024

(Amendment)

Paints and varnishes - Determination of volatile organic compounds(VOC) and/or semi volatile organic compounds (SVOC) content - Part 2: Gas-chromatographic method - Amendment 1 (ISO 11890-2:2020/FDAM 1:2024)

Paints and varnishes - Determination of volatile organic compounds(VOC) and/or semi volatile organic compounds (SVOC) content - Part 2: Gas-chromatographic method - Amendment 1 (ISO 11890-2:2020/FDAM 1:2024)

Beschichtungsstoffe - Bestimmung des Gehaltes an flüchtigen organischen Verbindungen (VOC-Gehalt) und des Gehaltes an schwerflüchtigen organischen Verbindungen (SVOC-Gehalt) - Teil 2: Gaschromatographisches Verfahren - ÄNDERUNG 1 (ISO 11890 2:2020/FDAM 1:2024)

Peintures et vernis - Détermination de la teneur en composés organiques volatils (COV) et/ou composés organiques semi-volatils (COSV) - Partie 2: Méthode par chromatographie en phase gazeuse - Amendement 1 (ISO 11890-2:2020/FDAM 1:2024)

Barve in laki - Določanje hlapnih organskih spojin (VOC) in/ali polhlapnih organskih spojin (SVOC) - 2. del: Metoda plinske kromatografije - Dopolnilo A1 (ISO 11890-2:2020/FDAM 1:2024)

General Information

Status
Not Published
Public Enquiry End Date
09-Sep-2023
ICS
71.040.50 - Physicochemical methods of analysis
87.040 - Paints and varnishes
Technical Committee
IBLP - Paints and varnishes
Current Stage
5020 - Formal vote (FV) (Adopted Project)
Start Date
16-Feb-2024
Due Date
05-Apr-2024
Completion Date
04-Mar-2024
Ref Project
EN ISO 11890-2:2020/A1:2024 - Paints and varnishes - Determination of volatile organic compounds(VOC) and/or semi volatile organic compounds (SVOC) content - Part 2: Gas-chromatographic method - Amendment 1 (ISO 11890-2:2020/Amd 1:2024)

Relations

Revises
SIST EN ISO 11890-2:2020 - Paints and varnishes - Determination of volatile organic compounds(VOC) and/or semi volatile organic compounds (SVOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2020)
Effective Date
01-Sep-2023

Buy Standard

EN ISO 11890-2:2020/oprA1:2023EN ISO 11890-2:2020/oprA1:2023
PreviousNext
Draft
EN ISO 11890-2:2020/oprA1:2023
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
SIST EN ISO 11890-2:2020/oprA1:2023
01-september-2023
Barve in laki - Določevanje hlapnih organskih spojin (VOC) in/ali polhlapnih
organskih spojin (SVOC) - 2. del: Metoda plinske kromatografije - Dopolnilo A1
(ISO 11890-2:2020/DAM 1:2023)
Paints and varnishes - Determination of volatile organic compounds(VOC) and/or semi
volatile organic compounds (SVOC) content - Part 2: Gas-chromatographic method -
Amendment 1 (ISO 11890-2:2020/DAM 1:2023)
Beschichtungsstoffe - Bestimmung des Gehaltes an flüchtigen organischen
Verbindungen (VOC-Gehalt) und des Gehaltes an schwerflüchtigen organischen
Verbindungen (SVOC-Gehalt) - Teil 2: Gaschromatographisches Verfahren (ISO 11890-
2:2020/DAM 1:2023)
Peintures et vernis - Détermination de la teneur en composés organiques volatils (COV)
et/ou composés organiques semi-volatils (COSV) - Partie 2: Méthode par
chromatographie en phase gazeuse - Amendement 1 (ISO 11890-2:2020/DAM 1:2023)
Ta slovenski standard je istoveten z: EN ISO 11890-2:2020/prA1
ICS:
71.040.50 Fizikalnokemijske analitske Physicochemical methods of
metode analysis
87.040 Barve in laki Paints and varnishes
SIST EN ISO 11890-2:2020/oprA1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIST EN ISO 11890-2:2020/oprA1:2023

SIST EN ISO 11890-2:2020/oprA1:2023
DRAFT AMENDMENT
ISO 11890-2:2020/DAM 1
ISO/TC 35/SC 16 Secretariat: DIN
Voting begins on: Voting terminates on:
2023-06-16 2023-09-08
Paints and varnishes — Determination of volatile organic
compounds(VOC) and/or semi volatile organic compounds
(SVOC) content —
Part 2:
Gas-chromatographic method
AMENDMENT 1
Peintures et vernis — Détermination de la teneur en composés organiques volatils (COV) et/ou composés
organiques semi-volatils (COSV) —
Partie 2: Méthode par chromatographie en phase gazeuse
AMENDEMENT 1
ICS: 87.040
IMPORTANT — Please use this updated version dated 2023-04-24, and
discard any previous version of this DAM as new DAM ballot dates
were set.
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 11890-2:2020/DAM 1:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

SIST EN ISO 11890-2:2020/oprA1:2023

DRAFT AMENDMENT
ISO 11890-2:2020/DAM 1
ISO/TC 35/SC 16 Secretariat: DIN
Voting begins on: Voting terminates on:
2023-05-04
Paints and varnishes — Determination of volatile organic
compounds(VOC) and/or semi volatile organic compounds
(SVOC) content —
Part 2:
Gas-chromatographic method
AMENDMENT 1
Peintures et vernis — Détermination de la teneur en composés organiques volatils (COV) et/ou composés
organiques semi-volatils (COSV) —
Partie 2: Méthode par chromatographie en phase gazeuse
AMENDEMENT 1
ICS: 87.040
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO 11890-2:2020/DAM 1:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

SIST EN ISO 11890-2:2020/oprA1:2023
ISO 11890-2:2020/DAM 1:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standa
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 11890-2:2020(Main)
Paints and varnishes - Determination of volatile organic compounds(VOC) and/or semi volatile organic compounds (SVOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2020)
EN ISO 11890-2:2020

This document is applicable for the determination of VOC and SVOC with an expected VOC and/or SVOC content greater than 0,01 % by mass up to 100 % by mass.
The method given in ISO 11890-1 is used when the VOC is greater than 15 % by mass. This document (method ISO 11890-2) applies when the system contains VOC and SVOC as the VOC result of ISO 11890-1 can be influenced by the SVOC. For VOC content smaller than 0,1 %, the head space method described in ISO 17895 is used as an alternative. ISO 11890-1 and ISO 17895 cannot be used for the determination of the SVOC content.
NOTE 1  Some ingredients of coating materials and their raw materials can decompose during analysis and cause artificial VOC and/or SVOC signals. When determining VOC and/or SVOC for coating materials and their raw materials, these signals are artefacts of the method and are not taken into account (examples are given in Annex B).
This method assumes that the volatile matter is either water or organic. However, other volatile inorganic compounds can be present and might need to be quantified by another suitable method and allowed for in the calculations. The method defined in this document is not applicable for determination of water content.
NOTE 2  If organic acids or bases and their corresponding salts are present in the coating material or its raw materials, the amount that is quantified by this method might not be accurate due to a change in the acid or base equilibrium.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11890-2:2020(Main)
Paints and varnishes - Determination of volatile organic compounds(VOC) and/or semi volatile organic compounds (SVOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2020)
EN ISO 11890-2:2020

This document is applicable for the determination of VOC and SVOC with an expected VOC and/or SVOC content greater than 0,01 % by mass up to 100 % by mass.
The method given in ISO 11890-1 is used when the VOC is greater than 15 % by mass. This document (method ISO 11890-2) applies when the system contains VOC and SVOC as the VOC result of ISO 11890-1 can be influenced by the SVOC. For VOC content smaller than 0,1 %, the head space method described in ISO 17895 is used as an alternative. ISO 11890-1 and ISO 17895 cannot be used for the determination of the SVOC content.
NOTE 1  Some ingredients of coating materials and their raw materials can decompose during analysis and cause artificial VOC and/or SVOC signals. When determining VOC and/or SVOC for coating materials and their raw materials, these signals are artefacts of the method and are not taken into account (examples are given in Annex B).
This method assumes that the volatile matter is either water or organic. However, other volatile inorganic compounds can be present and might need to be quantified by another suitable method and allowed for in the calculations. The method defined in this document is not applicable for determination of water content.
NOTE 2  If organic acids or bases and their corresponding salts are present in the coating material or its raw materials, the amount that is quantified by this method might not be accurate due to a change in the acid or base equilibrium.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4827:2024(Main)
Aerospace series - Hexavalent chromium free anodizing of aluminium and aluminium alloys
EN 4827:2024

This document specifies the requirements for hexavalent chromium free anodizing of aluminium and aluminium alloys for corrosion protection, bonding and painting.
This document does not apply to hard anodizing and plasma electrolytic anodizing (micro-arc oxidation).
The purpose of this document is to give design, quality and manufacturing requirements. It does not give complete in-house process instructions; these are given in the processor's detailed process instructions.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17983:2024(Main)
Algae and algae products - Measurement for renewable algal raw material for energy and non-energy applications
EN 17983:2024

This document specifies the methods to be used for the measurement of energy content and main elements balances of algae from cultivation or from wild growth and algae products to provide biomass, intended for renewable algal raw material used as bioenergy and in bio-based products.
This document does not apply to methods of algae and algae products sampling, harvesting and pre/postprocessing.
This document does not apply to algae and algae products intended for the food and feed sector.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12312-1:2024(Main)
Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs
EN 12312-1:2024

This European Standard specifies the technical requirements to minimise the hazards listed in Clause 4 which can arise during the commissioning, the operation and the maintenance of passenger stairs when used as intended, including misuse reasonably foreseeable by the manufacturer, when carried out in accordance with the specifications given by the manufacturer or his authorised representative. It also takes into account some requirements recognised as essential by authorities, aircraft and ground support equipment (GSE) manufacturers as well as airlines and handling agencies.
This European Standard applies to:
a)   self-propelled stairs with seated driver;
b)   pedestrian controlled stairs;
c)   towable stairs equipped with powered means, e.g. for height adjustment, stabilisers;
d)   automatic levelling systems of stairs
for embarking/disembarking of passengers.
Powered should also be understood as manual effort stored in springs or hydraulic accumulators, etc., the dangerous action of which can be produced or can continue after the manual effort has ceased or directly applied manual effort for lifting or lowering loads.
Those clauses of this standard that can apply may also be used as a guideline for the design of towable stairs without powered means.
This European Standard does not establish additional requirements for the following:
1)   persons falling out of an aircraft with the passenger stairs not in position;
2)   hazards resulting from a moving stairway (escalator);
3)   upper deck door access.
This part of EN 12312 is not applicable to passenger stairs which are manufactured before the date of publication by CEN of this standard.
This part of EN 12312 when used in conjunction with EN 1915-1, EN 1915-2, EN 1915-3 and EN 1915-4 provides the requirements for passenger stairs.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12662-2:2024(Main)
Liquid petroleum products - Determination of total contamination - Part 2: Fatty acid methyl esters
EN 12662-2:2024

This document specifies a method for the determination of the content of undissolved substances, referred to as total contamination, in neat fatty acid methyl esters (FAME). The working range is from 5 mg/kg to 30 mg/kg and it was established in an interlaboratory study by applying EN ISO 4259-1 [1].
This European Standard in general applies to products having a kinematic viscosity not exceeding 8 mm2/s at 20 °C, or 5 mm2/s at 40 °C, e.g. FAME as specified in EN 14214 [2].

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 556-1:2024(Main)
Sterilization of medical devices - Requirements for medical devices to be designated "STERILE" - Part 1: Requirements for terminally sterilized medical devices
EN 556-1:2024

This document specifies the requirements for a terminally sterilized medical device to be designated ‘STERILE’. Part 2 of this European standard specifies the requirements for an aseptically processed medical device to be designated "STERILE".
NOTE   For the purpose of the EU Directive(s) for medical devices (see Bibliography), designation of a medical device as ‘STERILE’ is only permissible when a validated sterilization process has been applied. Requirements for validation and routine control of processes for the sterilization of medical devices are specified in EN ISO 11135, EN ISO 11137, EN ISO 14160, EN ISO 14937, EN ISO 17665-1, EN ISO 20857, EN ISO 25424 and ISO 22441.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12662-1:2024(Main)
Liquid petroleum products - Determination of total contamination - Part 1: Middle distillates and diesel fuels
EN 12662-1:2024

This European Standard specifies a method for the determination of the content of undissolved substances, referred to as total contamination, in middle distillates, in diesel fuels containing up to 30 % (V/V) fatty acid methyl esters (FAME), and in neat FAME. The working range is from 12 mg/kg to 30 mg/kg and it was established in an interlaboratory study by applying EN ISO 4259 [2].
This European Standard in general applies to products having a kinematic viscosity not exceeding 8 mm2/s at 20 °C, or 5 mm2/s at 40 °C, e.g. diesel fuel as specified in EN 590 [1].
This test method may be used for diesel fuels containing more than 30 % (V/V) FAME and for petroleum products having a kinematic viscosity exceeding 8 mm2/s at 20 °C, or 5 mm2/s at 40 °C, however in such cases the precision of the test method is not defined.
NOTE 1   Excessive contamination in a fuel system can give rise to premature blocking of filters and/or hardware failure, and is therefore undesirable.
NOTE 2   For the purposes of this European Standard, the term "% (V/V)" is used to represent the volume fraction, φ, of a material.
WARNING - Use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 7218:2024(Main)
Microbiology of the food chain - General requirements and guidance for microbiological examinations (ISO 7218:2024)
EN ISO 7218:2024

This document specifies general requirements and gives guidance on microbiological examinations.
It is applicable to:
—     the implementation of specific horizontal or vertical International Standards developed by ISO/TC 34/SC 9 or ISO/TC 34/SC 5 for detection or enumeration of microorganisms, named hereafter “specific standards”;
—     good laboratory practices for microbiology laboratories testing samples from the food chain;
—     guidance for microbiological laboratories testing samples from the food chain on the technical requirements for conforming to ISO/IEC 17025.
The requirements of this general standard supersede corresponding ones in existing specific standards.
Additional instructions for examinations using the polymerase chain reaction (PCR) are specified in ISO 22174.
This document is applicable to examinations for bacteria, yeasts and moulds and can be used, if supplemented with specific guidance, for parasites and viruses. It does not apply to examinations for toxins or other metabolites (e.g. amines) from microorganisms.
This document is applicable to microbiology of the food chain, from primary production stage to food and animal feed products, including the premises where the food or feed production and handling takes place. It is also applicable to the microbiological examination of water where water is used in food production or is regarded as a food in national legislation.

  • Standard
    91 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 7436:2024(Main)
Fasteners - Slotted set screws with cup point (ISO 7436:2024)
EN ISO 7436:2024

Specifies the characteristics of products with metric dimensions and thread sizes from M 1,6 up to and including M 12 and product grade A; includes specifications with reference to International Standards; tabulates thread sizes M 1,6 up to M 12 with nominal lengths from 2 mm up to 60 mm; gives an example for the designation.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day