SIST EN 62841-2-8:2016

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 2-8: Particular requirements for hand-held shears and nibblers (IEC 62841-2-8:2016)25.140.20Electric tools25.120.10Kovaški stroji. Stiskalnice. ŠkarjeForging equipment. Presses. ShearsICS:Ta slovenski standard je istoveten z:EN 62841-2-8:2016SIST EN 62841-2-8:2016en01-december-2016SIST EN 62841-2-8:2016SLOVENSKI
STANDARDSIST EN 60745-2-8:20091DGRPHãþD



SIST EN 62841-2-8:2016



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 62841-2-8
October 2016 ICS 25.140.20 Supersedes EN 60745-2-8:2009
English Version
Electric motor-operated hand-held tools, transportable tools
and lawn and garden machinery - Safety -
Part 2-8: Particular requirements for hand-held shears
and nibblers (IEC 62841-2-8:2016 , modified)
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité -
Partie 2-8: Exigences particulières pour les cisailles et les grignoteuses portatives (IEC 62841-2-8:2016 , modifiée)
Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit -
Teil 2-8: Besondere Anforderungen für handgeführte Blechscheren und Nibbler (IEC 62841-2-8:2016 , modifiziert) This European Standard was approved by CENELEC on 2016-05-02. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62841-2-8:2016 E SIST EN 62841-2-8:2016



EN 62841-2-8:2016 2 European foreword The text of document 116/277/FDIS, future edition 1 of IEC 62841-2-8, prepared by IEC/TC 116 "Safety of motor-operated electric tools" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62841-2-8:2016.
A draft amendment, which covers common modifications to IEC 62841-2-8 (116/277/FDIS), was prepared by CLC/TC 116 "Safety of motor-operated electric tools" and approved by CENELEC.
The following dates are fixed:
• latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-04-07 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-05-02 This document supersedes EN 60745-2-8:2009.
This European Standard is divided into four parts: Part 1: General requirements which are common to most hand-held electric motor operated tools (for the purpose of this standard referred to simply as tools) which could come within the scope of this standard; Part 2, 3 or 4: Requirements for particular types of tools which either supplement or modify the requirements given in Part 1 to account for the particular hazards and characteristics of these specific tools. This Part 2-8 is to be used in conjunction with EN 62841-1:2015. This Part 2-8 supplements or modifies the corresponding clauses in EN 62841-1:2015, so as to convert it into the European Standard: Particular requirements for hand-held shears and nibblers. Where a particular subclause of Part 1 is not mentioned in this Part 2-8, that subclause applies as far as relevant. When this standard states "addition", "modification" or "replacement", the relevant text in Part 1 is to be adapted accordingly. Compliance with the clauses of Part 1 together with this Part 2-8 provides one means of conforming with the essential health and safety requirements of the Directive concerned. Warning:
Other requirements and other EU Directives can be applicable to the products falling within the scope of this standard. This European Standard follows the overall requirements of EN ISO 12100. The following print types are used:
- requirements; in roman type
- test specifications: in italic type;
- notes: in smaller roman type. The terms defined in Clause 3 are printed in bold typeface. Subclauses, notes, tables and figures which are additional to those in Part 1 are numbered starting from 101. SIST EN 62841-2-8:2016



EN 62841-2-8:2016 3 Clauses, subclauses, notes, tables, figures and annexes which are additional to those in IEC 62841-2-8:2016 are prefixed “Z”. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and supports essential requirements of EU Directive. For the relationship with EU Directive(s), see informative Annex ZZ, which is an integral part of this document. Endorsement notice The text of the International Standard IEC 62841-2-8:2016 was approved by CENELEC as a European Standard with agreed common modifications. SIST EN 62841-2-8:2016



EN 62841-2-8:2016 4 COMMON MODIFICATIONS Replace the title of Annex I by the following: Annex I (normative)
Measurement of noise and vibration emissions
Add the following annex: Annex ZZ (informative)
Relationship between this European Standard and the essential requirements of Directive 2006/42/EC [2006 OJ L157] aimed to be covered This European Standard has been prepared under a Commission’s standardisation request M/396 to provide one voluntary means of conforming to essential requirements of Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC. Once this standard is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of this standard given in Table ZZ.1 confers, within the limits of the scope of this standard, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations. Table ZZ.1 – Correspondence between this European Standard and Annex I of Directive 2006/42/EC Essential Requirements of Directive 2006/42/EC Clause(s) / sub-clause(s) of this EN Remarks / Notes Annex I All clauses All corresponding requirements are covered by complying with all clauses. WARNING 1: Presumption of conformity stays valid only as long as a reference to this European standard is maintained in the list published in the Official Journal of the European Union. Users of this standard should consult frequently the latest list published in the Official Journal of the European Union. WARNING 2: Other Union legislation may be applicable to the product(s) falling within the scope of this standard. SIST EN 62841-2-8:2016



IEC 62841-2-8 Edition 1.0 2016-04 INTERNATIONAL STANDARD NORME INTERNATIONALE Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety –
Part 2-8: Particular requirements for hand-held shears and nibblers
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses – Sécurité –
Partie 2-8: Exigences particulières pour les cisailles et les grignoteuses portatives
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE
ICS 25.140.20
ISBN 978-2-8322-3319-1
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale ®
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé. SIST EN 62841-2-8:2016



– 2 – IEC 62841-2-8:2016 © IEC 2016 CONTENTS FOREWORD . 3 1 Scope . 5 2 Normative references. 5 3 Terms and definitions . 5 4 General requirements . 5 5 General conditions for the tests . 5 6 Radiation, toxicity and similar hazards . 5 7 Classification . 6 8 Marking and instructions . 6 9 Protection against access to live parts . 6 10 Starting . 6 11 Input and current . 6 12 Heating . 6 13 Resistance to heat and fire . 6 14 Moisture resistance . 6 15 Resistance to rusting . 6 16 Overload protection of transformers and associated circuits . 6 17 Endurance . 7 18 Abnormal operation . 7 19 Mechanical hazards . 7 20 Mechanical strength . 7 21 Construction . 7 22 Internal wiring . 8 23 Components . 8 24 Supply connection and external flexible cords . 8 25 Terminals for external conductors . 8 26 Provision for earthing . 8 27 Screws and connections . 8 28 Creepage distances, clearances and distances through insulation . 8 Annex I (informative)
Measurement of noise and vibration emissions . 9 Annex K (normative)
Battery tools and battery packs . 13 Bibliography . 13
Figure I.101 – Position of transducers for shears and nibblers . 11 Figure I.102 – Test bench with workpiece . 12
Table 4 – Required performance levels . 7 Table I.101 – Operating conditions for shears and nibblers .
...