SIST EN IEC 60893-2:2024
(Main)Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test (IEC 60893-2:2023)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test (IEC 60893-2:2023)
This part of IEC 60893 describes methods of test for the materials defined in IEC 60893-1
(referred to also as Part 1).
Stratifiés industriels rigides en planches à base de résines thermodurcissables à usages électriques - Partie 2: Méthodes d'essai (IEC 60893-2:2023)
Stratifiés industriels rigides en planches à base de résines thermodurcissables à usages électriques - Partie 2: Méthodes d'essai (IEC 60893-2:2023)
IEC 60893-2:2023 est disponible sous forme de IEC 60893-2:2023 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.
L'IEC 60893-2:2023 décrit les méthodes d'essai applicables aux matériaux définis dans l'IEC 60893-1 (également désignée sous le nom de Partie 1). Cette troisième édition annule et remplace la deuxième édition parue en 2003. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) la référence à la spécification IEC 60167:1964, qui a été annulée, a été supprimée;
b) des références à l'IEC 62631-3-3:2015, qui remplace l'IEC 60167:1964, ont été ajoutées. Le contenu du 6.3 a été mis à jour en conséquence. La procédure d'essai n'a pas changé;
c) les références normatives ont été mises à jour.
Izolacijski materiali - Industrijske toge laminirane plošče iz smol s toplotnim utrjevanjem za električne namene - 2. del: Preskusne metode (IEC 60893-2:2023)
Ta del standarda IEC 60893 opisuje preskusne metode za materiale, določene v standardu IEC 60893-1 (imenovan tudi 1. del).
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 60893-2:2024
01-februar-2024
Izolacijski materiali - Industrijske toge laminirane plošče iz smol s toplotnim
utrjevanjem za električne namene - 2. del: Preskusne metode (IEC 60893-2:2023)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for
electrical purposes - Part 2: Methods of test (IEC 60893-2:2023)
Stratifiés industriels rigides en planches à base de résines thermodurcissables à usages
électriques - Partie 2: Méthodes d'essai (IEC 60893-2:2023)
Stratifiés industriels rigides en planches à base de résines thermodurcissables à usages
électriques - Partie 2: Méthodes d'essai (IEC 60893-2:2023)
Ta slovenski standard je istoveten z: EN IEC 60893-2:2023
ICS:
29.035.20 Plastični in gumeni izolacijski Plastics and rubber insulating
materiali materials
SIST EN IEC 60893-2:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 60893-2:2024
---------------------- Page: 2 ----------------------
SIST EN IEC 60893-2:2024
EUROPEAN STANDARD EN IEC 60893-2
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2023
ICS 29.035.01 Supersedes EN 60893-2:2004
English Version
Insulating materials - Industrial rigid laminated sheets based on
thermosetting resins for electrical purposes - Part 2: Methods of
test
(IEC 60893-2:2023)
Matériaux isolants - Stratifiés industriels rigides en planches Isoliermaterialien - Industrielle starre Schichtstoffplatten auf
à base de résines thermodurcissables à usages électriques Basis duroplastischer Harze für elektrotechnische Zwecke -
- Partie 2: Méthodes d'essai Teil 2: Prüfverfahren
(IEC 60893-2:2023) (IEC 60893-2:2023)
This European Standard was approved by CENELEC on 2023-12-18. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60893-2:2023 E
---------------------- Page: 3 ----------------------
SIST EN IEC 60893-2:2024
EN IEC 60893-2:2023 (E)
European foreword
The text of document 15/1017/FDIS, future edition 3 of IEC 60893-2, prepared by IEC/TC 15 "Solid
electrical insulating materials" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 60893-2:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-09-18
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-12-18
document have to be withdrawn
This document supersedes EN 60893-2:2004 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60893-2:2023 was approved by CENELEC as a European
Standard without any modification.
2
---------------------- Page: 4 ----------------------
SIST EN IEC 60893-2:2024
EN IEC 60893-2:2023 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.