iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1563:1998/A1:2003

(Amendment)

Founding - Spheroidal graphite cast irons

Founding - Spheroidal graphite cast irons

This European Standard defines the grades and the corresponding requirements of spheroidal graphite cast iron. This European Standard specifies a classification based on mechanical properties measured on machined test pieces prepared from: - separately cast test samples; - cast-on samples; - samples cut from arom a casting. This European Standard also specifies a classification as a function of hardness. This standard does not apply to spheroidal graphite cast iron used for pipes, fitting and accessories which are the subject of EN 545, EN 598, EN 969 and ISO 2531.

Gießereiwesen - Gusseisen mit Kugelgraphit

Fonderie - Fonte a graphite sphéroidal

Livarstvo - (Siva) litina s kroglastim grafitom - Dopolnilo A1

General Information

Status
Withdrawn
Publication Date
31-Mar-2003
Withdrawal Date
05-Jan-2012
ICS
77.080.10 - Irons
Technical Committee
IFEK - Ferrous metals
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
05-Jan-2012
Due Date
28-Jan-2012
Completion Date
06-Jan-2012
Directive
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
Ref Project
EN 1563:1997/A1:2002 - Founding - Spheroidal graphite cast irons

Relations

Replaced By
SIST EN 1563:2012 - Founding - Spheroidal graphite cast irons
Effective Date
01-Feb-2012
Amends
SIST EN 1563:1998 - Founding - Spheroidal graphite cast irons
Effective Date
22-Dec-2008
Amends
SIST EN 1563:1998 - Founding - Spheroidal graphite cast irons
Effective Date
08-Jun-2022

Buy Standard

EN 1563:1998/A1:2003EN 1563:1998/A1:2003
PreviousNext
Amendment
EN 1563:1998/A1:2003
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1563:1998/A1:2003
01-april-2003
Livarstvo - (Siva) litina s kroglastim grafitom - Dopolnilo A1
Founding - Spheroidal graphite cast irons
Gießereiwesen - Gusseisen mit Kugelgraphit
Fonderie - Fonte a graphite sphéroidal
Ta slovenski standard je istoveten z: EN 1563:1997/A1:2002
ICS:
77.080.10 Železo Irons
SIST EN 1563:1998/A1:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 1563:1998/A1:2003

---------------------- Page: 2 ----------------------

SIST EN 1563:1998/A1:2003
EUROPEAN STANDARD
EN 1563:1997/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2002
ICS 77.080.10
English version
Founding - Spheroidal graphite cast irons
Fonderie - Fonte à graphite sphéroïdal Gießereiwesen - Gusseisen mit Kugelgraphit
This amendment A1 modifies the European Standard EN 1563:1997; it was approved by CEN on 11 April 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1563:1997/A1:2002 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 1563:1998/A1:2003
EN 1563:1997/A1:2002 (E)
Contents
Foreword.3
Table 3 — Mechanical properties measured on test pieces machined from cast-on samples .4
8.3.2 Samples and test pieces .4
2

---------------------- Page: 4 ----------------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 11652:2022(Main)
Steel and iron - Determination of cobalt content - Flame atomic absorption spectrometric method (ISO 11652:1997)
EN ISO 11652:2022

This International Standard specifies a flame atomic absorption spectrometric method for the
determination of the cobalt content in steel and iron.
The method is applicable to cobalt contents between 0,003 % (m/m) and 5,0 % (m/m).

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 945-1:2019(Main)
Microstructure of cast irons - Part 1: Graphite classification by visual analysis (ISO 945-1:2019)
EN ISO 945-1:2019

This document specifies a method of classifying the microstructure of graphite in cast irons by
comparative visual analysis.
The purpose of this document is to provide information about the method of graphite classification. It
is not intended to give information on the suitability of cast-iron types and grades for any particular
application.
The particular material grades are specified mainly by mechanical properties and, in the case of
austenitic and abrasion resistant cast irons, by their chemical composition. The interpretation
of graphite form and size does not allow a statistically valid statement on the fulfilment of the
requirements specified in the relevant material standard.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1563:2018(Main)
Founding - Spheroidal graphite cast irons
EN 1563:2018

This draft European Standard defines the grades and the corresponding requirements for spheroidal graphite cast irons.
This draft European Standard specifies 2 groups of spheroidal graphite cast iron grades by a classification based on mechanical properties measured on machined test pieces prepared from cast samples. The first group deals mainly with ferritic to pearlitic grades. The second group deals with solid-solution strengthened ferritic grades.
This draft European Standard does not cover technical delivery conditions for iron castings (see EN 1559 1 [3] and EN 1559 3 [4]).
This draft European Standard does not cover all aspects of:
-   ausferritic spheroidal graphite cast irons which are specified in EN 1564 [5];
-   low alloyed ferritic spheroidal graphite cast irons which are specified in EN 16124 [6];
-   continuous cast iron bars which are specified in EN 16482 [7];
-   austenitic cast irons which are specified in EN 13835 [8];
-   spheroidal graphite cast irons used for pipes, fittings and their joints which are the subject of EN 545 [9], EN 598 [10] and EN 969 [11];
-   the grades of spheroidal graphite cast irons as specified in EN 545 which are used for products such as industrial valves, non-industrial manually operated shut-off valves and flanges and their joints, which are the subject of the applicable European product standards.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13835:2012(Main)
Founding - Austenitic cast irons
EN 13835:2012

This European Standard specifies the grades and corresponding requirements of austenitic cast irons. These requirements are specified in terms of: - graphite form and metal structure: either flake or spheroidal graphite in an austenitic matrix; - chemical composition: as given for each of the grades; - mechanical properties: obtained from separately cast samples.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 10353:2012(Main)
Chemical analysis of ferrous materials - Analysis of Ferro-silicon - Determination of Al, Ti and P by inductively coupled plasma optical emission spectrometry
CEN/TR 10353:2011

This Technical Report describes an inductively coupled plasma optical emission spectrometric method for the determination of Al, Ti and P contents in Ferro Silicon materials.
The method is applicable to:
- Al content between 0,2 and 2 %;
- Ti content between 0,02 and 0,25 %;
- P content between 0,005 and 0,05 %.
This Technical Report also describes the general requirements for analysis by inductively coupled plasma optical emission spectrometry, the preparation and dissolution of the test sample and the method of calculation of the results.
The procedure is valid for the analytical lines given in Table 1. This table also gives, for each line, the spectral interferences, which must be accurately corrected.
NOTE   The interferences extend as well as other possible interferences depend on the temperature in the plasma and on the optical resolution of the spectrometer used.
Table 1 - Spectral lines suggested together with the interferences which shall be corrected
Element   Wavelength (nm)   Interferences
Al   308,22   V
Ti   337,28   V, Ni
P   178,29   Mo

  • Technical report
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 10354:2012(Main)
Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al by X-ray fluorescence spectrometry
CEN/TR 10354:2011

This Technical Report describes a X-ray fluorescence (XRF) spectrometric method for the determination of Si and Al contents in Ferro Silicon materials.
The method is applicable to:
- Si content between 40 and 90 %;
- Al content between 0,5 and 6 %.
The Technical Report specifies the general requirements for analysis by X-ray fluorescence spectrometry and the preparation of the test sample.
The correction of the spectrometric measurement from spectral interferences on the analytical lines used is essential. This Technical Report is valid for the analytical lines:
- Si Kα 7.126 (for element contents between 45 and 90 %);
- Al Kα 8.339 (for element contents between 0,8 and 6 %);
- Fe Kα 1.937 (for element contents between 10 and 58 %).
NOTE   For matrix matching purposes, iron is included in the analytical program to be prepared.
Within the conditions here above, spectral interferences don’t need to be calculated.

  • Technical report
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1560:2011(Main)
Founding - Designation system for cast iron - Material symbols and material numbers
EN 1560:2011

This European Standard establishes a material designation system either by symbols or by numbers for cast iron. The designation system by symbols is applicable to a) standardized cast iron materials (see 3.1); b) non-standardized cast iron materials (see 3.2). The designation system by numbers is only applicable to standardized cast iron materials (see 3.1). NOTE: The standardized designation by symbols does not necessarily imply that the materials is standardized

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12513:2011(Main)
Founding - Abrasion resistant cast irons
EN 12513:2011

This European Standard defines the grades of abrasion resistant white cast irons. It also specifies the grades in terms of: - chemical composition - hardness. The types of abrasion resistant white cast irons covered by this standard are: a) unalloyed or low cast irons; b) nickel chromium cast irons covering two general types: - 4 % Ni 2 % Cr cast irons; - 9 % Cr 5 % Ni cast irons; c) high chromium cast irons covering four ranges of chromium content.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10001:2000(Main)
Definition and classification of pig-irons
EN 10001:1990

This annex is applicable to pig-iron in the solid state, unless otherwise agreed at the time of ordering

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 16482:2022(Main)
Founding - Continuous cast iron bars
prEN 16482

This European Standard defines the grades of grey cast iron and spheroidal graphite cast iron bars, which have been produced by the continuous casting process.
This European Standard specifies the characterizing properties of grey cast iron bars by either:
a)   the tensile strength measured on machined test pieces prepared from samples cut from the bars, or
b)   the hardness measured on the bars.
If agreed by the manufacturer and the purchaser, the combination of both tensile strength from option a) and hardness from option b) may be specified.
This European Standard specifies the characterizing properties of spheroidal graphite cast iron bars by the tensile strength measured on machined test pieces prepared from samples cut from the bars.
This European Standard specifies 4 grades of grey cast iron and 14 grades of spheroidal graphite cast iron by a classification based on tensile strength and 4 grades of grey cast iron by a classification based on Brinell hardness.
This European Standard specifies also the straightness of the bars.
This European Standard does not cover technical delivery conditions for iron castings (see EN 1559 1 [1] and EN 1559 3 [2]).

  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day