SIST EN 1779:2000/A1:2004
(Amendment)Non-destructive testing - Leak testing - Criteria for method and technique selection
Non-destructive testing - Leak testing - Criteria for method and technique selection
This European Standard describes criteria for the selection of the most suitable method and technique for the assessment of leak tightness by indication or measurement of a gas leakage. Annex A, normative, allows a comparison of standard test methods. Leak detection using hydrostatic tests, ultrasonic or electromagnetic methods is not included in this document. This standard can be used for equipment which can be evacuated or pressurized.
Zestörungsfreie Prüfung - Dichtheitsprüfung - Kriterien zur Auswahl von Prüfmethoden und -verfahren
Dieser Europäische Norm beschreibt die Kriterien für die Auswahl der geeignetsten Methoden und Verfahren für die Beurteilung der Dichtheit durch Anzeige oder Messung einer Gasleckage. Der normative Anhang A erlaubt einen Vergleich der Standardprüfverfahren. Dichtheitsprüfungen, die hydrostatische Prüfungen, elektromagnetische Ultraschallprüfungen beinhalten, sind in diesem Entwurf nicht berücksichtigt. Diese Europäische Norm kann auf Einrichtungen angewendet werden, die evakuiert oder unter Druck gesetzt werden können.
Essais non destructifs - Contrôle d'étanchéité - Criteres de choix de la méthode et de la technique
Le présent projet de norme européenne décrit les critères de sélection de la meilleure méthode et de la meilleure technique d'évaluation de l'étanchéité par indication ou mesurage d'une fuite gazeuse. L'annexe A, normative, permet de comparer des techniques de contrôle normalisées. Le contrôle de l'étanchéité par épreuve hydrostatique, par les ultrasons ou par des méthodes électromagnétiques ne figure pas dans ce document. La présente norme s'applique aux appareils sous vide ou sous pression.
Neporušitveno preskušanje - Preskus tesnosti - Kriteriji za izbiro metode in postopka
General Information
- Status
- Published
- Publication Date
- 31-May-2004
- Technical Committee
- PKG - Testing of metallic materials
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Jun-2004
- Due Date
- 01-Jun-2004
- Completion Date
- 01-Jun-2004
Relations
- Effective Date
- 22-Dec-2008
Overview
EN 1779:1999/A1:2003 (CEN) is a European Standard for non-destructive testing (NDT) - leak testing, providing criteria to select the most suitable method and technique for assessing leak tightness by indication or measurement of gas leakage. The standard applies to equipment that can be evacuated or pressurized and includes a normative annex (Annex A) that allows a direct comparison of standard test methods. Note: leak detection using hydrostatic tests, ultrasonic or electromagnetic methods is explicitly excluded.
Key topics and requirements
- Method and technique selection criteria: The standard defines how to evaluate and choose an appropriate gas-based leak test approach based on the characteristics and testing needs of the item under test.
- Assessment by indication or measurement: Coverage includes both qualitative (indication) and quantitative (measurement) leak testing approaches using gas detection.
- Comparative guidance (Annex A): A normative annex provides a structured way to compare different standard test methods to guide selection.
- Scope limitations: Clear exclusions (hydrostatic, ultrasonic, electromagnetic methods) and applicability only to equipment that can be evacuated or pressurized are specified.
- Standard context: EN 1779 is a CEN (European Committee for Standardization) document within the NDT family and is referenced for regulatory and industry best-practice decisions on gas leak testing.
Practical applications
- Choosing the optimal gas leak testing method during design validation, production testing, repair verification or periodic inspection of pressurizable equipment.
- Informing test planning where sensitivity, reliability and suitability of gas-based leak detection must be assessed before execution.
- Providing a technical basis for procurement specifications, acceptance criteria and quality control procedures where gas leak tightness is critical.
Who uses this standard
- NDT and quality engineers specifying or performing leak tests
- Manufacturers of pressure vessels, piping, valves, HVAC systems, and components that are tested by evacuation or pressurization
- Design engineers selecting verification methods for prototypes or production items
- Compliance officers and third-party inspectors writing test protocols or acceptance criteria
Related standards
- EN 1779 should be used alongside other CEN and international NDT and leak testing standards (refer to national or industry lists for specific test-method standards). Because hydrostatic, ultrasonic and electromagnetic techniques are excluded, consult dedicated standards when those methods are required.
Keywords: EN 1779, leak testing, non-destructive testing, leak tightness, gas leakage, method selection, CEN standard.
Frequently Asked Questions
SIST EN 1779:2000/A1:2004 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Non-destructive testing - Leak testing - Criteria for method and technique selection". This standard covers: This European Standard describes criteria for the selection of the most suitable method and technique for the assessment of leak tightness by indication or measurement of a gas leakage. Annex A, normative, allows a comparison of standard test methods. Leak detection using hydrostatic tests, ultrasonic or electromagnetic methods is not included in this document. This standard can be used for equipment which can be evacuated or pressurized.
This European Standard describes criteria for the selection of the most suitable method and technique for the assessment of leak tightness by indication or measurement of a gas leakage. Annex A, normative, allows a comparison of standard test methods. Leak detection using hydrostatic tests, ultrasonic or electromagnetic methods is not included in this document. This standard can be used for equipment which can be evacuated or pressurized.
SIST EN 1779:2000/A1:2004 is classified under the following ICS (International Classification for Standards) categories: 19.100 - Non-destructive testing. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 1779:2000/A1:2004 has the following relationships with other standards: It is inter standard links to SIST EN 1779:2000. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 1779:2000/A1:2004 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 1779:2000/A1:2004 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2004
Neporušitveno preskušanje - Preskus tesnosti - Kriteriji za izbiro metode in
postopka
Non-destructive testing - Leak testing - Criteria for method and technique selection
Zestörungsfreie Prüfung - Dichtheitsprüfung - Kriterien zur Auswahl von Prüfmethoden
und -verfahren
Essais non destructifs - Contrôle d'étanchéité - Criteres de choix de la méthode et de la
technique
Ta slovenski standard je istoveten z: EN 1779:1999/A1:2003
ICS:
19.100 Neporušitveno preskušanje Non-destructive testing
2003-
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...