SIST EN 60927:2008/A1:2014
(Amendment)Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements
Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements
This International Standard specifies performance requirements for starting devices (starters and ignitors) for tubular fluorescent and other discharge lamps for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz, which produce starting pulses not greater than 5 kV. This standard is used in conjunction with IEC 61347-1 and IEC 61347-2-1. NOTE 1 All glow starters for fluorescent and other discharge lamps including thermal relay/cut-outs will be included in IEC 60155. NOTE 2 There are regional standards regarding the regulation of EMC requirements for end-products like luminaires and independent control gear. In a luminaire, the control gear is dominant in this respect. Control gear, together with other components, should comply with these standards.
Geräte für Lampen - Startgeräte (andere als Glimmstarter) - Anforderungen an die Arbeitsweise
Appareils auxiliaires pour lampes - Dispositifs d'amorçage (autres que starters à lueur) - Exigences de performance
Pribor za sijalke - Vžigne naprave (razen tlivnih starterjev) - Tehnične zahteve - Dopolnilo A1
Ta mednarodni standard določa tehnične zahteve za vžigne naprave (starterje in sprožilce) za cevne fluorescenčne in druge razelektritvene sijalke za uporabo pri izmeničnem napajanju do 1000 V pri 50 Hz ali 60 Hz, pri čemer nastajajo vžigni impulzi, ki ne presegajo 5 kV. Ta standard se uporablja v povezavi s standardoma IEC 61347-1 in IEC 61347-2-1. OPOMBA 1: Vsi tlivni starterji za fluorescenčne in druge razelektritvene sijalke, vključno s termoreleji/izklopnimi stikali, bodo vključeni v standard IEC 60155. OPOMBA 2: Obstajajo regionalni standardi v zvezi z urejanjem zahtev za elektromagnetno združljivost za končne izdelke, kot so svetilke in neodvisne krmilne naprave. V svetilki je v tem smislu prevladujoča krmilna naprava. Krmilna naprava naj bi bila skupaj z drugimi sestavnimi deli v skladu s temi standardi.
General Information
- Status
- Published
- Publication Date
- 05-Dec-2013
- Technical Committee
- IESV - Lamps and related equipment
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 03-Dec-2013
- Due Date
- 07-Feb-2014
- Completion Date
- 06-Dec-2013
Relations
- Effective Date
- 29-Jan-2023
- Effective Date
- 14-Dec-2010
Overview
EN 60927:2007/A1:2013 (IEC 60927:2007/A1:2013) is a CENELEC amendment that updates the European adoption of IEC 60927 on auxiliaries for lamps - starting devices (other than glow starters) - performance requirements. The amendment was approved in October 2013 and aligns the EN version with IEC changes. It applies to starting devices (ignitors) used with discharge and fluorescent lamps and defines test and marking requirements to verify safe, reliable starting performance.
Key Topics and Requirements
- Scope and applicability: Covers ignitors and starting devices for discharge and fluorescent lamps (ICS 29.140.30).
- Amendment status: Modifies EN 60927:2007; endorsed by CENELEC and published as EN 60927:2007/A1:2013. Implementation and national adoption dates are specified in the amendment.
- Marking changes: The amendment removes a previously existing item c) from the Marking clause (see full text for details).
- Test conditions (clause 7.3.2) - significant technical change:
- Tests use two ignitors connected as in normal use, each associated with appropriate control gear.
- Test voltage is set to 1.06 × the rated supply voltage of the control gear.
- Ignitors are operated at their marked maximum case temperature t and without lamp.
- One ignitor’s live connections are loaded by the maximum allowable load capacitance, while the other is left unloaded.
- Control gear used in the endurance test must comply with Annex A; failed control gear is replaced during the test.
- Additional testing is required for ignitors intended to be connected in series with discharge lamps: tested at maximum case temperature and loaded with the lamp’s rated current (use the highest rated current for multi-lamp devices).
- Administrative changes: Deletion of definition 3.7 and editorial adjustments noted in the amendment.
Applications
- Product design and qualification for ignitors and electronic starting devices used in fluorescent and discharge lighting systems.
- Manufacturers verifying compliance with European and IEC performance requirements.
- Test laboratories implementing endurance and performance tests that reflect real-use conditions (including specified voltage margin and capacitance loading).
- Luminaire and control gear designers ensuring compatibility between ignitors and ballast/control gear.
- Regulatory and conformity bodies assessing national adoption and enforcement.
Related Standards
- Base publication: EN 60927:2007 / IEC 60927:2007 (this document is Amendment A1 to that standard).
- Refer to Annex A of the standard for specific control gear requirements used in endurance testing.
Keywords: EN 60927, IEC 60927, ignitors, starting devices, lamp auxiliaries, performance requirements, test conditions, control gear, fluorescent lamps, discharge lamps, CENELEC.
Frequently Asked Questions
SIST EN 60927:2008/A1:2014 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements". This standard covers: This International Standard specifies performance requirements for starting devices (starters and ignitors) for tubular fluorescent and other discharge lamps for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz, which produce starting pulses not greater than 5 kV. This standard is used in conjunction with IEC 61347-1 and IEC 61347-2-1. NOTE 1 All glow starters for fluorescent and other discharge lamps including thermal relay/cut-outs will be included in IEC 60155. NOTE 2 There are regional standards regarding the regulation of EMC requirements for end-products like luminaires and independent control gear. In a luminaire, the control gear is dominant in this respect. Control gear, together with other components, should comply with these standards.
This International Standard specifies performance requirements for starting devices (starters and ignitors) for tubular fluorescent and other discharge lamps for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz, which produce starting pulses not greater than 5 kV. This standard is used in conjunction with IEC 61347-1 and IEC 61347-2-1. NOTE 1 All glow starters for fluorescent and other discharge lamps including thermal relay/cut-outs will be included in IEC 60155. NOTE 2 There are regional standards regarding the regulation of EMC requirements for end-products like luminaires and independent control gear. In a luminaire, the control gear is dominant in this respect. Control gear, together with other components, should comply with these standards.
SIST EN 60927:2008/A1:2014 is classified under the following ICS (International Classification for Standards) categories: 29.140.30 - Fluorescent lamps. Discharge lamps. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 60927:2008/A1:2014 has the following relationships with other standards: It is inter standard links to SIST EN 60927:2008, SIST EN 60927:2008. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 60927:2008/A1:2014 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2014
3ULERU]DVLMDONH9åLJQHQDSUDYH UD]HQWOLYQLKVWDUWHUMHY 7HKQLþQH]DKWHYH
'RSROQLOR$
Auxiliaries for lamps - Starting devices (other than glow starters) - Performance
requirements
Geräte für Lampen - Startgeräte (andere als Glimmstarter) - Anforderungen an die
Arbeitsweise
Appareils auxiliaires pour lampes - Dispositifs d'amorçage (autres que starters à lueur) -
Exigences de performance
Ta slovenski standard je istoveten z: EN 60927:2007/A1:2013
ICS:
29.140.30 )OXRUHVFHQþQHVLMDONH6LMDONH Fluorescent lamps.
Discharge lamps
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 60927/A1
NORME EUROPÉENNE
November 2013
EUROPÄISCHE NORM
ICS 29.140.30
English version
Auxiliaries for lamps -
Starting devices (other than glow starters) -
Performance requirements
(IEC 60927:2007/A1:2013 (34C/951/CDV))
Appareils auxiliaires pour lampes - Geräte für Lampen -
Dispositifs d'amorçage (autres que Startgeräte (andere als Glimmstarter) -
starters à lueur) - Anforderungen an die Arbeitsweise
Exigences de performance (IEC 60927:2007/A1:2013
(CEI 60927:2007/A1:2013 (34C/951/CDV))
(34C/951/CDV))
This amendment A1 modifies the European Standard EN 60927:2007; it was approved by CENELEC on 2013-
10-21. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate
the conditions for giving this amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60927:2007/A1:2013 E
Foreword
The text of document 34C/951/CDV, future IEC 60927:2007/A1, prepared by SC 34C, "Auxiliaries for
Lamps", of IEC TC 34, "Lamps and related equipment"submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN 60927:2007/A1:2013.
The following dates are fixed:
(dop) 2014-07-21
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2016-10-21
• latest date by which
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...