SIST EN 13263-1:2005/kprA1:2008

SLOVENSKI STANDARD
SIST EN 13263-1:2005/kprA1:2008
01-oktober-2008
Mikro silika za beton - 1. del: Definicije, zahteve in merila skladnosti
Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria
Silikastaub für Beton - Teil 1: Definitionen, Anforderungen und Konformitätskriterien
Fumée de silice pour béton - Partie 1: Définitions, exigences et critères de conformité
Ta slovenski standard je istoveten z: EN 13263-1:2005/prA1
ICS:
01.040.91 Gradbeni materiali in gradnja Construction materials and
(Slovarji) building (Vocabularies)
91.100.30 Beton in betonski izdelki Concrete and concrete
products
SIST EN 13263-1:2005/kprA1:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13263-1:2005/kprA1:2008

---------------------- Page: 2 ----------------------

SIST EN 13263-1:2005/kprA1:2008
EUROPEAN STANDARD
FINAL DRAFT
EN 13263-1:2005
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
August 2008
ICS 91.100.30

English Version
Silica fume for concrete - Part 1: Definitions, requirements and
conformity criteria
Fumées de silice pour béton - Partie 1: Définitions, Silikastaub für Beton - Teil 1: Definitionen, Anforderungen
exigences et critères de conformité und Konformitätskriterien
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 104.
This draft amendment A1, if approved, will modify the European Standard EN 13263-1:2005. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13263-1:2005/prA1:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13263-1:2005/kprA1:2008
EN 13263-1:2005/prA1:2008 (E)
Foreword
This document (EN 13263-1:2005/prA1:2008) has been prepared by Technical Committee CEN/TC 104
“Concrete and related products”, the secretariat of which is held by DIN.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements
...