SIST EN 13036-7:2004
(Main)Road and airfield surface characteristics - Test methods - Part 7: Irregularity measurement of pavement courses : the straightedge test
Road and airfield surface characteristics - Test methods - Part 7: Irregularity measurement of pavement courses : the straightedge test
This European standard describes a standard apparatus and test methods for measuring single irregularities attributable to quality defects in the surface course(s) of new roads, airfields and other trafficked areas. It is not applicable to providing information on profile which will be the subject of a s subsequent CEN Standard. Single irregularities are by nature random, and consequently no routine sampling rates are specified (see annex A.1)
Oberflächeneigenschaften von Straßen und Flugplätzen - Prüfverfahren - Teil 7: Messung von Einzelunebenheiten von Verkehrsflächen: Messung mit der Richtlatte
Diese Europäische Norm beschreibt ein Standardgerät und ein Prüfverfahren (siehe Anmerkung in A.1) für das Messen von Einzelunebenheiten, die auf Qualitätsmängel in neuen Oberflächenschichten von Straßen, Flugplätzen und anderen Verkehrsflächen sowie auch von in Betrieb befindlichen Oberflächen zurückzuführen sind.
Dieses Prüfverfahren ist nicht anwendbar, um Informationen über das Profil oder die allgemeine Unebenheit zu erhalten. Einzelunebenheiten sind von Natur her zufällig, deshalb wird nicht die übliche Anzahl der Proben oder Präzisions-daten angegeben.
Caractéristiques de surface des routes et aérodromes - Méthodes d'essai - Partie 7: Mesurage des déformations localisées des couches de roulement des chaussées : essai a la regle
La présente Norme Européenne décrit un appareillage normalisé et une méthode d'essai (voir NOTE en A.1) qui permettent de mesurer les déformations localisées imputables aux défauts de qualité des couches de roulement de routes, d'aérodromes et d'autres surfaces nouvellement soumises à circulation ainsi que des surfaces déjà en service.
La présente méthode d'essai n'est pas destinée à fournir des informations sur le profil ou les défauts d'uni en général. Etant donné que les déformations localisées sont, par nature, aléatoires, cette méthode ne spécifie pas de vitesses d'échantillonnage de routine, ni de données relatives à la fidélité.
Značilnosti cestnih in letaliških površin - Preskusne metode - 7. del: Merjenje nepravilnosti na cestnih, vzletnih in drugih voziščih: preskus z merilno letvijo
General Information
- Status
- Published
- Publication Date
- 31-May-2004
- Technical Committee
- CES - Roads
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Jun-2004
- Due Date
- 01-Jun-2004
- Completion Date
- 01-Jun-2004
- Directive
- 89/106/EEC - Construction products
Overview
EN 13036-7:2003 - a CEN test method - defines the straightedge test for measuring single surface irregularities in pavement courses of roads, airfields and other trafficked areas. The standard covers a simple, static apparatus and procedure to identify localized deviations (quality defects) in new and in-service surface courses. It is explicitly not intended for full-profile or general longitudinal evenness assessment, and it does not prescribe routine sampling rates because single irregularities are inherently random.
Key topics and technical requirements
- Apparatus
- Straightedge: (3 000 ± 3) mm length; measurement-edge width (25 ± 1) mm. When suspended at endpoints the measurement edge plane must not deviate by more than ±0.5 mm and straightness along the length must be ≤ 1.5 mm.
- Measurement wedge: (300 ± 1) mm length; width (25 ± 1) mm. Marked in 1 mm increments for the first 10 mm and 2.5 mm increments thereafter. True height accuracy ±0.1 mm.
- Straightedge and wedge must carry the same unique reference and be calibrated (annually) with an accompanying certificate.
- Measurement procedure
- Clear surface of detritus. Place straightedge perpendicular to the surface; orient parallel to centre line for longitudinal checks or perpendicular for transverse checks (diagonal/other directions permitted).
- Insert wedge into the gap to refusal and read the distance between the straightedge edge and the pavement surface. Measure between two contact points and from both sides where practical.
- Record measurements to the nearest 1 mm and report the greatest irregularity found.
- Reporting
- Test report must include: reference to EN 13036-7:2003, test date, straightedge/wedge IDs, location (road/chainage), measurement type (longitudinal/transverse/diagonal), whether surface was trafficked, and responsible signature.
- Limitations
- Not a profilometric method; does not give continuous profile indices. Annex A clarifies field of application and calibration; Annex B lists country deviations.
Applications and users
- Practical use:
- Acceptance testing of newly constructed surface courses
- Quality control and on-site verification of surface defects that affect drainage, vehicle handling and comfort
- Localized rut-depth checks when used transversely (note: detailed rut standards are separate)
- Typical users:
- Highway and airport authorities, pavement contractors, site QA/QC engineers, pavement materials laboratories and consultants conducting conformance testing.
Related standards
- EN 13036 series (relevant parts): EN 13036‑1, EN 13036‑2, EN 13036‑3, EN 13036‑4 and the profilometric/longitudinal evenness work items cited in the standard.
- National and international references cited (e.g., ASTM E1703 and various national methods) are helpful complements when mechanised or profilometric methods are required.
Keywords: EN 13036-7:2003, straightedge test, pavement irregularity, road surface measurement, airfield surface, pavement course testing, CEN standard, wedge calibration.
Frequently Asked Questions
SIST EN 13036-7:2004 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Road and airfield surface characteristics - Test methods - Part 7: Irregularity measurement of pavement courses : the straightedge test". This standard covers: This European standard describes a standard apparatus and test methods for measuring single irregularities attributable to quality defects in the surface course(s) of new roads, airfields and other trafficked areas. It is not applicable to providing information on profile which will be the subject of a s subsequent CEN Standard. Single irregularities are by nature random, and consequently no routine sampling rates are specified (see annex A.1)
This European standard describes a standard apparatus and test methods for measuring single irregularities attributable to quality defects in the surface course(s) of new roads, airfields and other trafficked areas. It is not applicable to providing information on profile which will be the subject of a s subsequent CEN Standard. Single irregularities are by nature random, and consequently no routine sampling rates are specified (see annex A.1)
SIST EN 13036-7:2004 is classified under the following ICS (International Classification for Standards) categories: 17.040.20 - Properties of surfaces; 93.080.10 - Road construction; 93.120 - Construction of airports. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 13036-7:2004 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 13036-7:2004 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Oberflächeneigenschaften von Straßen und Flugplätzen - Prüfverfahren - Teil 7: Messung von Einzelunebenheiten von Verkehrsflächen: Messung mit der RichtlatteCaractéristiques de surface des routes et aérodromes - Méthodes d'essai - Partie 7: Mesurage des déformations localisées des couches de roulement des chaussées : essai a la regleRoad and airfield surface characteristics - Test methods - Part 7: Irregularity measurement of pavement courses : the straightedge test93.120Construction of airports93.080.10Gradnja cestRoad construction17.040.20Lastnosti površinProperties of surfacesICS:Ta slovenski standard je istoveten z:EN 13036-7:2003SIST EN 13036-7:2004en01-junij-2004SIST EN 13036-7:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13036-7August 2003ICS 17.040.20; 93.080.20English versionRoad and airfield surface characteristics - Test methods - Part 7:Irregularity measurement of pavement courses : thestraightedge testCaractéristiques de surface des routes et aérodromes -Méthodes d'essai - Partie 7: Mesurage des déformationslocaliséesdes couches de roulement des chaussées: essaià la règleOberflächeneigenschaften - Prüfverfahren - Teil 7:Messung von Einzelunebenheiten von Deckschichten fürStraßen, Flugplätze und andere Verkehrsflächen -Messung mit der RichtlatteThis European Standard was approved by CEN on 28 November 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13036-7:2003 ESIST EN 13036-7:2004
Application and calibration.8A.1Field of application.8A.2Apparatus calibration.8Annex B (informative)
A–deviations.9SIST EN 13036-7:2004
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...