SIST EN 573-1:2005

SLOVENSKI STANDARD
SIST EN 573-1:2005
01-januar-2005
1DGRPHãþD
SIST EN 573-1:1998
$OXPLQLMLQDOXPLQLMHYH]OLWLQH.HPLþQDVHVWDYDLQREOLNDJQHWHQLKL]GHONRY
GHO6LVWHPãWHYLOþQHJDR]QDþHYDQMD
Aluminium and aluminium alloys - Chemical composition and form of wrought products -
Part 1: Numerical designation system
Aluminium und Aluminiumlegierungen - Chemische Zusammensetzung und Form von
Halbzeug - Teil 1: Numerisches Bezeichnungssystem
Aluminium et alliages d'aluminium - Composition chimique et forme des produits
corroyés - Partie 1 : Systeme de désignation numérique
Ta slovenski standard je istoveten z: EN 573-1:2004
ICS:
77.040.30 Kemijska analiza kovin Chemical analysis of metals
77.150.10 Aluminijski izdelki Aluminium products
SIST EN 573-1:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 573-1:2005

---------------------- Page: 2 ----------------------

SIST EN 573-1:2005



EUROPEAN STANDARD
EN 573-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
November 2004
ICS 71.120.10; 77.150.10 Supersedes EN 573-1:1994
English version
Aluminium and aluminium alloys - Chemical composition and
form of wrought products - Part 1: Numerical designation system
Aluminium et alliages d'aluminium - Composition chimique Aluminium und Aluminiumlegierungen - Chemische
et forme des produits corroyés - Partie 1 : Système de Zusammensetzung und Form von Halbzeug - Teil 1:
désignation numérique Numerisches Bezeichnungssystem
This European Standard was approved by CEN on 26 August 2004.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.




EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 573-1:2004: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 573-1:2005
EN 573-1:2004 (E)
Contents
page
Foreword.3
1 Scope .4
2 International registration procedure.4
3 Basis for European designation.4
4 Four-digit numerical system.5
4.1 Alloy groups .5
4.2 1xxx group.5
4.3 2xxx to 8xxx groups .5
5 Registration rules for alloy modifications.6
6 Registration rules for national variations .7
Bibliography .8

2

---------------------- Page: 4 ----------------------

SIST EN 573-1:2005
EN 573-1:2004 (E)
Foreword
This document (EN 573-1:2004) has been prepared by Technical Committee CEN/TC 132 “Aluminium and
aluminium alloys”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2005, and conflicting national standards shall be withdrawn at the
latest by May 2005.
This document supersedes EN 573-1:1994. It contains only minor modifications which clarify its technical
content without modifying it.
This standard is part of set of five standards. The other standards deal with:
EN 573-2, Aluminium and aluminium alloys – Chemical composition and form of wrought products –
Part 2: Chemical symbol based designation system.
EN 573-3, Aluminium and aluminium alloys – Chemical composition and form of wrought products –
Part 3: Chemical composition.
EN 573-4, Aluminium and aluminium alloys – Chemical composition and form of wrought products –
Part 4: Forms of products.
prEN 573-5, Aluminium and aluminium alloys – Chemical composition and form of wrought products –
Part 5: Codification of standardized wrought products.
The wording has been clarified in accordance with the "International Alloy Designations and Chemical
Composition Limits for Wrought Aluminum and Wrought Aluminum Alloys".
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN 573-1:2005
EN 573-1:2004 (E)
1 Scope
This document specifies a European designation system of wrought aluminium and aluminium alloys, based
on an international designation system, and the procedure to obtain such international designation.
It is in accordance with the "Recommendation" dated December 15, 1970, as revised in March 2002, for an
International Designation System for Wrought Aluminum and Wrought Aluminum Alloys issued by the
Aluminum Association, Washington DC 20006, USA.
This standard applies to wrought products and to ingots intended to be wrought.
2 International registration procedure
All requests for international re
...