SIST-TS CEN ISO/TS 13140-1:2011

SLOVENSKI STANDARD
SIST-TS CEN ISO/TS 13140-1:2011
01-julij-2011
(OHNWURQVNRSRELUDQMHSULVWRMELQ8JRWDYOMDQMHVNODGQRVWLRSUHPHYYR]LOXLQ
REFHVWQLQDSUDYLVWHKQLþQRVSHFLILNDFLMR,6276GHO=JUDGED
SUHVNXãHYDOQHJDQL]DLQQDPHQSUHVNXãDQMD,6276
Electronic fee collection - Evaluation of on-board and roadside equipment for conformity
to ISO/TS 13141 - Part 1: Test suite structure and test purposes (ISO/TS 13140-1:2011)
Elektronische Gebührenerfassung - Konformitätsuntersuchung für bordeigene und
straßenseitige Ausrüstung zur Ortsbestimmung - Teil 1: Struktur und Zweck des
Prüfprogrammes (ISO/TS 13140-1:2011)
Perception du télépéage - Évaluation des équipements embarqués et en bord de route
quant à la conformité avec l'ISO/TS 13141 - Partie 1: Structure de suite d'essai et buts
des essais (ISO/TS 13140-1:2011)
Ta slovenski standard je istoveten z: CEN ISO/TS 13140-1:2011
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
transportu in trgovini and trade
43.040.15 $YWRPRELOVNDLQIRUPDWLND Car informatics. On board
9JUDMHQLUDþXQDOQLãNLVLVWHPL computer systems
SIST-TS CEN ISO/TS 13140-1:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN ISO/TS 13140-1:2011

---------------------- Page: 2 ----------------------

SIST-TS CEN ISO/TS 13140-1:2011


TECHNICAL SPECIFICATION
CEN ISO/TS 13140-1

SPÉCIFICATION TECHNIQUE

TECHNISCHE SPEZIFIKATION
April 2011
ICS 35.240.60; 03.220.20
English Version
Electronic fee collection - Evaluation of on-board and roadside
equipment for conformity to ISO/TS 13141 - Part 1: Test suite
structure and test purposes (ISO/TS 13140-1:2011)
Perception du télépéage - Évaluation des équipements Elektronische Gebührenerfassung -
embarqués et en bord de route quant à la conformité avec Konformitätsuntersuchung für bordeigene und
l'ISO/TS 13141 - Partie 1: Structure de suite d'essai et buts straßenseitige Ausrüstung zur Ortsbestimmung - Teil 1:
des essais (ISO/TS 13140-1:2011) Struktur und Zweck des Prüfprogrammes (ISO/TS 13140-
1:2011)
This Technical Specification (CEN/TS) was approved by CEN on 18 October 2010 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 13140-1:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN ISO/TS 13140-1:2011
CEN ISO/TS 13140-1:2011 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST-TS CEN ISO/TS 13140-1:2011
CEN ISO/TS 13140-1:2011 (E)
Foreword
This document (CEN ISO/TS 13140-1:2011) has been prepared by Technical Committee CEN/TC 278 “Road
transport and traffic telematics” the secretariat of which is held by NEN, in collaboration with Technical
Committee ISO/TC 204 "Intelligent transport systems".
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST-TS CEN ISO/TS 13140-1:2011

---------------------- Page: 6 ----------------------

SIST-TS CEN ISO/TS 13140-1:2011

TECHNICAL ISO/TS
SPECIFICATION 13140-1
First edition
2011-04-15

Electronic fee collection — Evaluation of
on-board and roadside equipment for
conformity to ISO/TS 13141 —
Part 1:
Test suite structure and test purposes
Perception du télépéage — Évaluation des équipements embarqués et
en bord de route quant à la conformité avec l'ISO/TS 13141 —
Partie 1: Structure de suite d'essai et buts des essais




Reference number
ISO/TS 13140-1:2011(E)
©
ISO 2011

---------------------- Page: 7 ----------------------

SIST-TS CEN ISO/TS 13140-1:2011
ISO/TS 13140-1:2011(E)


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2011 – All rights reserved

---------------------- Page: 8 ----------------------

SIST-TS CEN ISO/TS 13140-1:2011
ISO/TS 13140-1:2011(E)
Contents Page
Foreword .iv
Introduction.v
1 Scope.1
2 Normative references.1
3 Terms and definitions .2
4 Abbreviated terms.4
5 Test suite structure (TSS).5
5.1 Structure.5
5.2 Reference to conformance test specifications .6
5.3 Test Purposes (TP).6
5.3.1 TP Definition conventions .6
5.3.2 TP naming conventions.7
5.4 Conformance test report.7
Annex A (normative) Test purposes for on-board units.8
Annex B (normative) Test purposes for roadside equipment.26
Annex C (normative) PCTR for on-board units.32
Annex D (normative) PCTR for roadside equipment.38
Bibliography.44

© ISO 2011 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST-TS CEN ISO/TS 13140-1:2011
ISO/TS 13140-1:2011(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
In other circumstances, particularly when there is an urgent market requirement for such documents, a
technical committee may decide to publish other types of document:
⎯ an ISO Publicly Available Specification (ISO/PAS) represents an agreement between technical experts in
an ISO working group and is accepted for publication if it is approved by more than 50 % of the members
of the parent committee casting a vote;
⎯ an ISO Technical Specification (ISO/TS) represents an agreement between the members of a technical
committee and is accepted for publication if it is approved by 2/3 of the members of the committee casting
a vote.
An ISO/PAS or ISO/TS is reviewed after three years in order to decide whether it will be confirmed for a
further three years, revised to become an International Standard, or withdrawn. If the ISO/PAS or ISO/TS is
confirmed, it is reviewed again after a further three years, at which time it must either be transformed into an
International Standard or be withdrawn.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO/TS 13140-1 was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 278, Road transport and traffic telematics, in collaboration with Technical Committee ISO/TC 204,
Intelligent transport systems, in accordance with the Agreement on technical cooperation between ISO and
CEN (Vienna Agreement).
ISO/TS 13140 consists of the following parts, under the general title Electronic fee collection — Evaluation of
on-board and roadside equipment for conformity to ISO/TS 13141:
⎯ Part 1: Test suite structure and test purposes
⎯ Part 2: Abstract test suite

iv © ISO 2011 – All rights reserved

---------------------- Page: 10 ----------------------

SIST-TS CEN ISO/TS 13140-1:2011
ISO/TS 13140-1:2011(E)
Introduction
ISO/TS 17575 is part of a set of standards that supports interoperability of autonomous EFC-systems. It
defines the EFC context data, their charge reports and their use of communication infrastructure.
The set of standards also supports short range communication links in the context of autonomous electronic
fee collection (EFC) on-board equipment (OBE) to enable spot checks for the enforcement process. The
application interface is defined in ISO/TS 13141:2010.
Within the set of EFC standards this part of ISO/TS 13140 defines the process and tests for conformity
evaluation of OBE and roadside equipment (RSE) that comply with the requirements in ISO/TS 13141:2010.
This part of ISO/TS 13140 is intended to
⎯ assess OBU and RSE capabilities,
⎯ assess OBU and RSE behaviour,
⎯ serve as a guide for OBU and RSE conformance evaluation and type approval,
⎯ achieve comparability between the results of the corresponding tests applied in different places at
different times, and
⎯ facilitate communications between parties.
This part of ISO/TS 13140 is based on
⎯ ISO/TS 13141:2010,
⎯ the set of dedicated short range communication (DSRC) standards defining the communication stack,
and
⎯ ISO 9646.
This part of ISO/TS 13140 is based on using the tree and tabular combined notation (TTCN) that is a
standardized language suitable for specification of test cases and steps for assessment of protocol and
application behaviour. The TTCN language is also supported by modern automated tools that accelerate
software design, implementation and testing.

© ISO 2011 – All rights reserved v

---------------------- Page: 11 ----------------------

SIST-TS CEN ISO/TS 13140-1:2011

---------------------- Page: 12 ----------------------

SIST-TS CEN ISO/TS 13140-1:2011
TECHNICAL SPECIFICATION ISO/TS 13140-1:2011(E)

Electronic fee collection — Evaluation of on-board and roadside
equipment for conformity to ISO/TS 13141 —
Part 1:
Test suite structure and test purposes
1 Scope
This part of ISO/TS 13140 specifies the test suite structure (TSS) and test purposes (TP) to evaluate the
conformity of on-board units (OBU) and roadside equipment (RSE) to ISO/TS 13141:2010.
It provides a basis for conformance tests for dedicated short range communication (DSRC) equipment (on-
board units and roadside units) to enable interoperability between different equipment supplied by different
manufacturers.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO/TS 13141:2010, Electronic fee collection — Localisation augmentation communication for autonomous
systems
ISO 14906:2011, Electronic fee collection — Application interface definition for dedicated short-range
communication
ISO/TS 14907-2:2011, Road transport and traffic telematics — Electronic fee collection — Test procedures for
user and fixed equipment — Part 2: Conformance test for the onboard unit application interface
EN 15509:2007, Road transport and traffic telematics — Electronic fee collection — Interoperability
application profile for DSRC
EN 15876-1, Electronic fee collection — Evaluation of on-board and roadside equipment for conformity to
EN 15509 — Part 1: Test suite structure and test purposes
ETSI TS 102 486-2-2 V1.2.1 (2008-10), Intelligent transport systems (ITS); Road Transport and Traffic
Telematics (RTTT); Test specifications for Dedicated Short Range Communication (DSRC) transmission
equipment; Part 2: DSRC application layer; Sub-Part 2: Test Suite Structure and Test Purposes (TSS&TP)
© ISO 2011 – All rights reserved 1

---------------------- Page: 13 ----------------------

SIST-TS CEN ISO/TS 13140-1:2011
ISO/TS 13140-1:2011(E)
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
access credentials
data that is transferred to on-board equipment (OBE), in order to establish the claimed identity of a roadside
equipment (RSE) application process entity
[ISO 14906:2011, definition 3.1]
NOTE Access credentials carry information needed to fulfil access conditions in order to perform the operation on the
addressed element in the OBE. Access credentials can carry passwords as well as cryptography-based information such
as authenticators.
3.2
attribute
application information formed by one or by a sequence of data elements, used for implementation of a
transaction
NOTE Adapted from ISO 14906:2011.
3.3
authenticator
data appended to, or a cryptographic transformation of, a data unit that allows a recipient of the data unit to
prove the source and/or the integrity of the data unit and protect against forgery
[ISO 14906:2011, definition 3.4]
3.4
channel
information transfer path
[ISO 7498-2:1989, definition 3.3.13]
3.5
component
logical and physical entity composing an on-board equipment, supporting a specific functionality
[ISO 14906:2011, definition 3.6]
3.6
contract
expression of an agreement between two or more parties concerning the use of the road infrastructure
[ISO 14906:2011, definition 3.7]
3.7
cryptography
discipline which embodies principles, means, and methods for the transformation of data in order to hide its
information content, prevent its undetected modification and/or prevent its unauthorized use
[ISO 7498-2:1989, definition 3.3.20]
3.8
data group
collection of closely related EFC data attributes which together describe a distinct part of an EFC transaction
[ISO 14906:2011, definition 3.9]
2 © ISO 2011 – All rights reserved

---------------------- Page: 14 ----------------------

SIST-TS CEN ISO/TS 13140-1:2011
ISO/TS 13140-1:2011(E)
3.9
data integrity
property that data has not been altered or destroyed in an unauthorized manner
[ISO 7498-2:1989, definition 3.3.21]
3.10
element
〈DSRC〉 directory containing application information in the form of attributes
[ISO 14906:2011, definition 3.11]
3.11
implementation conformance statement
statement made by the supplier of an implementation or system claimed to conform to a given specification,
stating which capabilities have been implemented
[ISO/TS 14907-2:2011, definition 3.12]
3.12
implementation conformance statement pro forma
document, in the form of a questionnaire, which when completed for an implementation or system becomes
an implementation conformance statement
[ISO/TS 14907-2:2011, definition 3.13]
3.13
implementation extra information for testing
statement made by the supplier or an implementer of a DUT which contains or references all of the
information (in addition to that given in the implementation conformance statement) related to the DUT and its
testing environment, which will enable the test laboratory to run an appropriate test suite against the DUT
NOTE Adapted from ISO/TS 14907-2:2011.
3.14
implementation extra information for testing pro forma
document, in the form of a questionnaire, which when completed for a DUT becomes an implementation extra
information for testing
NOTE Adapted from ISO/TS 14907-2:2011.
3.15
on-board equipment
OBE
equipment fitted within or on the outside of a vehicle and used for toll purposes
NOTE The OBE does not need to include payment means.
[ISO 14906:2011, definition 3.13]
3.16
on-board unit
OBU
minimum component of an on-board equipment, whose functionality always includes at least the support of
the DSRC interface
[ISO 14906:2011, definition 3.14]
3.17
roadside equipment
RSE
equipment located along the road transport network, for the purpose of communication and data exchanges
with on-board equipment
[ISO 14906:2011, definition 3.16]
© ISO 2011 – All rights reserved 3

---------------------- Page: 15 ----------------------

SIST-TS CEN ISO/TS 13140-1:2011
ISO/TS 13140-1:2011(E)
3.18
session
exchange of information and interaction occurring at a specific electronic fee collection station between the
roadside equipment and the user/vehicle
[ISO 14906:2011, definition 3.19]
3.19
transaction
whole of the exchange of information between the roadside equipment and the on-board equipment
necessary for the completion of an electronic fee collection operation over the dedicated short range
communication
[ISO 14906:2011, definition 3.24]
3.20
transaction model
functional model describing the general structure of electronic payment fee collection transactions
[ISO 14906:2011, definition 3.25]
3.21
tester
a combination of equipment and processes which is able to perform conformance tests according to
ISO/TS 13140-1
3.22
user
generic term used for the customer of a toll service provider, one liable for toll, the owner of the vehicle, a fleet
operator, a driver, etc., depending on the context
[ISO 14906:2011, definition 3.26]
4 Abbreviated terms
AC_CR Access Credentials
ADU Application Data Unit
APDU Application Protocol Data Unit
AP Application Process
ASN.1 Abstract Syntax Notation One (ISO/IEC 8824-1)
ATS Abstract Test Suite
BI Behaviour Invalid (i.e. Invalid Behaviour tests)
B-Kernel Broadcast Kernel
BST Beacon Service Table
BV Behaviour Valid (i.e. Valid Behaviour tests)
cf Confirm
DLC Data Link Control
DSRC Dedicated Short Range Communication
4 © ISO 2011 – All rights reserved

---------------------- Page: 16 ----------------------

SIST-TS CEN ISO/TS 13140-1:2011
ISO/TS 13140-1:2011(E)
DUT Device Under Test (ISO/TS 14907-2)
EID Element IDentifier
EFC Electronic Fee Collection
EVENT-RT EVENT-REPORT
ICS Implementation Conformance Statement
IXIT Implementation eXtra Information for Testing
LLC Logical Link Control
MAC Medium Access Control
PCTR Proforma Conformance Test Report
TSS Test Suite Structure
VST Vehicle Service Table
5 Test suite structure (TSS)
5.1 Structure
The Test Suite Structure (TSS) including its subgroups that are inherited from other specifications is given in
Table 1.
Table 1 — Test Suite Structure
Group Type of DUT Behaviour
Physical layer On-Board Unit Valid Behaviour
Invalid Behaviour
Roadside Equipment Valid Behaviour
Invalid Behaviour
DLC MAC sublayer On-Board Unit Valid Behaviour
Invalid Behaviour
Roadside Equipment Valid Behaviour
Invalid Behaviour
DLC LLC sublayer On-Board Unit Valid Behaviour
Invalid Behaviour
Roadside Equipment Valid Behaviour
Invalid Behaviour
Application layer On-Board Unit Valid Behaviour
Invalid Behaviour
Roadside Equipment Valid Behaviour
Invalid Behaviour
Physical layer tests are to be performed in a radio wave lab. They will not form part of the ATS.
© ISO 2011 – All rights reserved 5

---------------------- Page: 17 ----------------------

SIST-TS CEN ISO/TS 13140-1:2011
ISO/TS 13140-1:2011(E)
5.2 Reference to conformance test specifications
Conformance to a profile standard implies conformance to the related base standards; hence, a number of
test cases for the LAC application are exactly the same as the conformance test cases for the related base
standards. Other test cases are derived from the base standards conformance test cases, by applying some
restrictions or choices in e.g. the parameters values, according to what is stated in the profile standard. Finally,
specific conformance test cases for the LAC application are identified for statements contained in the LAC
application, which have no equivalence in the base standards. These latter cases cover for example the
application layer data test purposes. This document takes into account already defined test purposes for
conformance to the base standards by referencing them, so that:
a) For test purposes that are identical to those defined in the base standards conformance test cases (see
e.g. [ETSI TS 102 486-2-2] or [EN 15876-1]) a direct reference is reported. For reader’s convenience, the
title or a verbal description of the referenced test purpose is given, together with the reference.
b) For test purposes that are derived from those defined in the base standards conformance test cases, a
direct reference is reported, plus an indication on how the referred test purpose has to be modified for the
profile conformance testing.
c) For test purposes that are specific to the standard profile, a complete description is given.
An indication on whether a test purpose is identical, derived, or specific is given in each test purpose.
5.3 Test Purposes (TP)
5.3.1 TP Definition conventions
The TPs are defined following the rules shown in Table 2 below. All Test Purposes are defined in Annex A
and Annex B.
Table 2 — TP Definition Rules
TP ID according to the TP naming Title
conventions
Reference
TP origin
Initial condition
Stimulus and expected behaviour

TP ID The TP ID is a unique identifier. It shall be specified according to
the TP naming conventions defined in the sub-clause below.
Title Short description of Test Purpose objective.
Reference The reference should contain the references of the subject to be
validated by the actual TP (specification reference, clause,
paragraph), or the reference to the standard document defining the
TP.
TP origin Indicates if the TP is identical to a TP defined in another test
standard, derived from a TP defined in another test standard, or
specific for this standard profile.
Initial condition The condition defines in which initial state the DUT has to be to
apply the actual TP.
Stimulus and expected Definition of the events the tester performs, and the events that are
behaviour expected from the DUT to conform to the base specification.
6 © ISO 2011 – All rights reserved

---------------------- Page: 18 ----------------------

SIST-TS CEN ISO/TS 13140-1:2011
ISO/TS 13140-1:2011(E)
5.3.2 TP naming conventions
Each TP is given a unique identification. This unique identification is built up to contain the following string of
information:
TP///-
TP  : to indicate that it is a Test Purpose;
: which group among those defined in Table 1 – Test Suite Structure does the TP apply to;
 : type of DUT (i.e. OBU or RSE);
X  : type of testing (i.e. Valid Behaviour tests – BV, or Invalid Behaviour tests – BI)
 : sequential TP number (01-99)

The naming conventions are as described in Table 3.
Table 3 — TP naming convention
Identifier:
TP///-

applicable for OBU/RSE

PHY Physical layer
applicable for OBU/RSE
MAC/LLC MAC/LLC sublayer
applicable for OBU/RSE
AP-BAS Application layer – I Kernel support

applicable for OBU
AP-FUN Application layer – T Kernel support
applicable for OBU
AP-DAT Application layer – Data attributes support
applicable for OBU
AP-SEC Application layer – Security Level 1 support
applicable for RSE
AP-SET Application layer - SET-rq PDU test purposes,
applicable for RSE
AP-REL Application layer - EVENT-REPORT-rq PDU test purposes
= type of DUT OBU On-Board Unit
 RSE Roadside Equipment
x = Type of testing BV Valid Behaviour Tests
 BI Invalid Behaviour Tests
= sequential (01-99) Test Purpose Number
number

5.4 Conformance test report
The manufacturer of the OBU and RSE, respectively, is responsible for providing a conformance test report.
The manufacturer of the OBU shall complete the proforma conformance test report for on-board units as
defined in Annex C.
The manufacturer of the RSE shall complete the proforma conformance test report for roadside equipment as
defined in Annex D.

© ISO 2011 – All rights reserved 7

---------------------- Page: 19 ----------------------

SIST-TS CEN ISO/TS 13140-1:2011
ISO/TS 13140-1:2011(E)
Annex A
(normative)

Test purposes for on-board units
A.1 Introduction
This annex contains the Test Purposes (TP) for the conformity evaluation of OBUs to ISO/TS 13141.
A.1.1 Symbols in TP Descriptions
For the application layer test purposes, a special notation and symbol convention is used, as defined in what
follows.
Symbols are used in the description of the TPs, with meanings according to Table A.1 below.
Table A.1 — Description of TP Symbols
SYMBOL DESCRIPTION
XXX.rq ⇒ The Tester sends the XXX.rq PDU to the DUT
The DUT sends the YYY.rs PDU to the Tester
⇐ YYY.rs
A ≡ B Test Purpose A “is congruent to” Test Purpose B. The
notation Test Purpose A ≡ Test Purpose B means that the
Test Purpose A is the same as Test Purpose B. If differences
in parameters or parameter values have to be applied, these
differences are indicated in the text immediately below.
Object A “is transformed” into Object B. So a notation like
A → B
“Table X → Table Y” means that, for the scope of the Test
Purpose, any reference of Table X should be changed into
references to Table Y.
= Means “assignment”. That is, a notation like
“accessCredentials = a value” means that the field
accessCredentials is given a value.
Ø Means “empty” or “not set”. So, a notation like
“accessCredentials = Ø → accessCredentials = calculated
value”, for a given Test Purpose, means “change all
occurrences in which the field accessCredentials has not been
assigned to calculation of the value accessCredentials to a
given value.

8 © ISO 2011 – All rights reserved

---------------------- Page: 20 ----------------------

SIST-TS CEN ISO/TS 13140-1:2011
ISO/TS 13140-1:2011(E)
A.2 Physical layer
Per ISO/TS 13141:2010, 5.5.2, all test p
...