iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 14044:2005/oprA1:2008

(Amendment)

High rise aerial appliances for fire service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods

High rise aerial appliances for fire service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods

Hubrettungsfahrzeuge für die Feuerwehr - Drehleitern mit aufeinander folgenden (sequenziellen) Bewegungen (Halbautomatik-Drehleitern) - Sicherheits- und Leistungsanforderungen sowie Prüfverfahren

Moyens élévateurs aériens pour la lutte contre l'incendie - Echelles pivotantes à mouvements séquentiels - Prescriptions de sécurité et des performances et méthodes d'essais

Visoke nadzemne naprave za gasilske enote - Polavtomatske vrtljive gasilske avtolestve - Zahteve za varnost in obnašanje v uporabi in preskusne metode

General Information

Status
Not Published
Public Enquiry End Date
09-Oct-2008
ICS
13.220.10 - Fire-fighting
97.145 - Ladders
Technical Committee
POZ - Požarna varnost
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
04-Apr-2024
Due Date
09-Apr-2024
Completion Date
04-Apr-2024
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
98/37/EC - Machinery
Mandate
M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
EN 14044:2005/prA1 - High rise aerial appliances for fire service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods

Relations

Consolidated By
SIST EN 14044:2005+A1:2009 - High rise aerial appliances for fire service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods
Effective Date
19-Jan-2023
Consolidated By
SIST EN 14044:2005+A1:2009 - High rise aerial appliances for fire service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods
Effective Date
18-Jan-2023
Consolidated By
SIST EN 14044:2005+A1:2009 - High rise aerial appliances for fire service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods
Effective Date
01-Jun-2009
Amends
SIST EN 14044:2005 - High rise aerial appliances for fire service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods
Effective Date
01-Sep-2008

Buy Standard

EN 14044:2005/oprA1:2008EN 14044:2005/oprA1:2008
PreviousNext
Draft
EN 14044:2005/oprA1:2008
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14044:2005/oprA1:2008
01-september-2008
Visoke nadzemne naprave za gasilske enote - Polavtomatske vrtljive gasilske
avtolestve - Zahteve za varnost in obnašanje v uporabi in preskusne metode
High rise aerial appliances for fire service use - Turntable ladders with sequential
movements - Safety and performance requirements and test methods
Hubrettungsfahrzeuge für die Feuerwehr - Drehleitern mit aufeinander folgenden
(sequenziellen) Bewegungen (Halbautomatik-Drehleitern) - Sicherheits- und
Leistungsanforderungen sowie Prüfverfahren
Moyens élévateurs aériens pour la lutte contre l'incendie - Echelles pivotantes à
mouvements séquentiels - Prescriptions de sécurité et des performances et méthodes
d'essais
Ta slovenski standard je istoveten z: EN 14044:2005/prA1
ICS:
13.220.10 Gašenje požara Fire-fighting
97.145 Lestve Ladders
SIST EN 14044:2005/oprA1:2008 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 14044:2005/oprA1:2008

---------------------- Page: 2 ----------------------

SIST EN 14044:2005/oprA1:2008
EUROPEAN STANDARD
FINAL DRAFT
EN 14044:2005
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
July 2008
ICS 13.220.10

English Version
High rise aerial appliances for fire service use - Turntable
ladders with sequential movements - Safety and performance
requirements and test methods
Moyens élévateurs aériens pour la lutte contre l'incendie - Hubrettungsfahrzeuge für die Feuerwehr - Drehleitern mit
Echelles pivotantes à mouvements séquentiels - aufeinander folgenden (sequenziellen) Bewegungen
Prescriptions de sécurité et des performances et méthodes (Halbautomatik-Drehleitern) - Sicherheits- und
d'essais Leistungsanforderungen sowie Prüfverfahren
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 192.
This draft amendment A1, if approved, will modify the European Standard EN 14044:2005. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14044:2005/prA1:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 14044:2005/oprA1:2008
EN 14044:2005/prA1:2008 (E)
Contents Page
Foreword.3
th
1 Modification to the Foreword, 4 paragraph .4
2 Modification to 5.1.6.13.2.1, Cables .4
3 Modification to 5.1.6.13.3.1, Chains .4
4 Modification to 7.2.2, Operating instruction .4
5 Modification to 7.2.4, Information on commissioning .5
6 Modification to 7.2.7, Maintenance information for use by trained personnel.5
7 Modification to 7.3.1 .5
8 Addition of new Annex ZB .6

2

---------------------- Page: 4 ----------------------

SIST EN 14044:2005/oprA1:2008
EN 14044:2005/prA1:2008 (E)
Foreword
This document (EN 14044:2005
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 14043:2014(Main)
High rise aerial appliances for fire service use - Turntable ladders with combined movements - Safety and performance requirements and test methods
EN 14043:2014

EN 14043 specifies the safety and performance requirements and test methods applicable to turntable ladders with combined movements of classes 18, 24, 30 and > 30 to 56, as defined in 3.13, under the control of fire-fighters and intended for fire fighting and rescuing people. Turntable ladder vehicles comprise a chassis, bodywork and a powered extending structure unit in the form of a ladder with or without a rescue cage. Turntable ladder vehicles covered by this European Standard have a self-propelled chassis, the motor of which supplies the power necessary for the operation of the ladder and permits all of the operational movements to be made simultaneously, with no restriction on the angle of the slewing movement. This European Standard deals with the technical safety requirements to minimize the hazards listed in Clause 4 which can arise during commissioning, operational use, routine checking and maintenance of turntable ladders when carried out in accordance with the specifications given by the manufacturer or the manufacturer's authorized representative. This European Standard deals with the use of turntable ladder vehicles within an ambient temperature range from -15 °C to +35 °C and with a wind velocity on the ladder set ≤ 12,5 m/s. Additional measures can be necessary for use outside this range. Special designs for use under special climatic conditions should be agreed between the manufacturer and the purchaser. Any additional requirements are outside the scope of the standard. This European Standard does not deal with the design of a standard automotive chassis with regard to hazards resulting from or due to use as a road vehicle. This European Standard is not applicable to turntable ladder vehicles with combined movements which are manufactured before the date of publication of this European Standard by CEN.

  • Standard
    88 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14044:2014(Main)
High rise aerial appliances for fire service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods
EN 14044:2014

EN 14044 specifies the safety and performance requirements and test methods applicable to turntable ladders with sequential movements of classes 18, 24, 30 and > 30 to 56, as defined in 3.13, under the control of fire-fighters and intended for fire fighting and rescuing people. Turntable ladder vehicles comprise a chassis, bodywork and a powered extending structure unit in the form of a ladder with or without a rescue cage. Turntable ladder vehicles covered by this European Standard have a self-propelled chassis, the motor of which supplies the power necessary for the operation of the ladder. They do not permit operational movements to be made simultaneously. This European Standard deals with the technical safety requirements to minimize the hazards listed in Clause 4 which can arise during commissioning, operational use, routine checking and maintenance of turntable ladders when carried out in accordance with the specifications given by the manufacturer or the manufacturer's authorized representative. This European Standard deals with the use of turntable ladder vehicles within an ambient temperature range from -15 °C to +35 °C and with a wind velocity on the ladder set ≤ 12,5 m/s. Additional measures can be necessary for use outside this range. Special designs for use under special climatic conditions should be agreed between the manufacturer and the purchaser. Any additional requirements are outside the scope of the standard. This European Standard does not deal with the design of a standard automotive chassis with regard to hazards resulting from or due to use as a road vehicle. This European Standard is not applicable to turntable ladder vehicles with sequential movements which are manufactured before the date of publication of this European Standard by CEN.

  • Standard
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1147:2010(Main)
Portable ladders for fire service use
EN 1147:2010

This European Standard specifies requirements, test methods and performance criteria for portable ladders for fire and rescue service use and associated purposes. The tests in this European Standard are type tests and not periodical tests. Non-portable ladders for fire and rescue service use are excluded from this standard.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14043:2005/oprA1:2008(Amendment)
High rise aerial appliances for fire service use - Turntable ladders with combined movements - Safety and performance requirements and test methods
EN 14043:2005/prA1
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14043:2014(Main)
High rise aerial appliances for fire service use - Turntable ladders with combined movements - Safety and performance requirements and test methods
EN 14043:2014

EN 14043 specifies the safety and performance requirements and test methods applicable to turntable ladders with combined movements of classes 18, 24, 30 and > 30 to 56, as defined in 3.13, under the control of fire-fighters and intended for fire fighting and rescuing people. Turntable ladder vehicles comprise a chassis, bodywork and a powered extending structure unit in the form of a ladder with or without a rescue cage. Turntable ladder vehicles covered by this European Standard have a self-propelled chassis, the motor of which supplies the power necessary for the operation of the ladder and permits all of the operational movements to be made simultaneously, with no restriction on the angle of the slewing movement. This European Standard deals with the technical safety requirements to minimize the hazards listed in Clause 4 which can arise during commissioning, operational use, routine checking and maintenance of turntable ladders when carried out in accordance with the specifications given by the manufacturer or the manufacturer's authorized representative. This European Standard deals with the use of turntable ladder vehicles within an ambient temperature range from -15 °C to +35 °C and with a wind velocity on the ladder set ≤ 12,5 m/s. Additional measures can be necessary for use outside this range. Special designs for use under special climatic conditions should be agreed between the manufacturer and the purchaser. Any additional requirements are outside the scope of the standard. This European Standard does not deal with the design of a standard automotive chassis with regard to hazards resulting from or due to use as a road vehicle. This European Standard is not applicable to turntable ladder vehicles with combined movements which are manufactured before the date of publication of this European Standard by CEN.

  • Standard
    88 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14044:2014(Main)
High rise aerial appliances for fire service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods
EN 14044:2014

EN 14044 specifies the safety and performance requirements and test methods applicable to turntable ladders with sequential movements of classes 18, 24, 30 and > 30 to 56, as defined in 3.13, under the control of fire-fighters and intended for fire fighting and rescuing people. Turntable ladder vehicles comprise a chassis, bodywork and a powered extending structure unit in the form of a ladder with or without a rescue cage. Turntable ladder vehicles covered by this European Standard have a self-propelled chassis, the motor of which supplies the power necessary for the operation of the ladder. They do not permit operational movements to be made simultaneously. This European Standard deals with the technical safety requirements to minimize the hazards listed in Clause 4 which can arise during commissioning, operational use, routine checking and maintenance of turntable ladders when carried out in accordance with the specifications given by the manufacturer or the manufacturer's authorized representative. This European Standard deals with the use of turntable ladder vehicles within an ambient temperature range from -15 °C to +35 °C and with a wind velocity on the ladder set ≤ 12,5 m/s. Additional measures can be necessary for use outside this range. Special designs for use under special climatic conditions should be agreed between the manufacturer and the purchaser. Any additional requirements are outside the scope of the standard. This European Standard does not deal with the design of a standard automotive chassis with regard to hazards resulting from or due to use as a road vehicle. This European Standard is not applicable to turntable ladder vehicles with sequential movements which are manufactured before the date of publication of this European Standard by CEN.

  • Standard
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1147:2010(Main)
Portable ladders for fire service use
EN 1147:2010

This European Standard specifies requirements, test methods and performance criteria for portable ladders for fire and rescue service use and associated purposes. The tests in this European Standard are type tests and not periodical tests. Non-portable ladders for fire and rescue service use are excluded from this standard.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14043:2005/oprA1:2008(Amendment)
High rise aerial appliances for fire service use - Turntable ladders with combined movements - Safety and performance requirements and test methods
EN 14043:2005/prA1
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-V CEN/CLC Guide 25:2024(Main)
The concept of Cooperation with European Organizations and other stakeholders
CEN/CLC Guide 25:2024
  • Guide
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST HD 60364-7-716:2024(Main)
Low-voltage electrical installations - Part 7-716: Requirements for special installations or locations - ELV DC power distribution over information and communications technology (ICT) cable infrastructure (IEC 60364-7-716:2023)
HD 60364-7-716:2023

IEC 60364-7-716:2023 specifies requirements in electrical installations for the distribution of ELV DC power using balanced, information technology cables and accessories primarily designed for data transmission, as specified in terms of a category within the channels of ISO/IEC 11801-1 using power sourcing equipment in accordance with IEC 62368-3.
Requirements are included for the design, erection, and verification of telecommunications infrastructure for the purpose of both telecommunications and distribution of ELV DC power. In addition, requirements are included for use of existing telecommunications infrastructure for distribution of ELV DC power.
The power delivery systems include, but are not restricted to, the Power over Ethernet systems specified by IEEE 802.3.
This document does not apply to the use of cables and accessories within the core and access networks for example private branch exchange (PBX).

  • Standardization document
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day