SIST EN 3475-513:2025

SLOVENSKI STANDARD
01-julij-2025
Aeronavtika - Električni kabli za uporabo v zračnih plovilih - Preskusne metode -
513. del: Odpornost proti deformaciji (namestitev s plastičnimi vezicami)
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 513:
Deformation resistance (installation with plastic cable ties)
Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren -
Teil 513: Verformungsbeständigkeit (Installation mit Kunststoff-Kabelbindern)
Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais -
Partie 513 : Résistance à la déformation (installation avec frettes de câblage en
plastique)
Ta slovenski standard je istoveten z: EN 3475-513:2025
ICS:
29.060.20 Kabli Cables
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 3475-513
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2025
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 3475-513:2020
English Version
Aerospace series - Cables, electrical, aircraft use - Test
methods - Part 513: Deformation resistance (installation
with plastic cable ties)
Série aérospatiale - Câbles électriques à usage Luft- und Raumfahrt - Elektrische Leitungen für
aéronautique - Méthodes d'essais - Partie 513 : Luftfahrtverwendung - Prüfverfahren - Teil 513:
Résistance à la déformation (installation avec colliers Verformungsbeständigkeit (Installation mit Kunststoff-
de frettage en plastique) Kabelbindern)
This European Standard was approved by CEN on 4 November 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3475-513:2025 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Coaxial cable — Method A . 4
4.1 Preparation of specimens . 4
4.1.1 Required parts/samples . 4
4.1.2 Initial measurement . 4
4.1.3 Preparation of samples . 5
4.2 Test method . 5
4.2.1 First test . 5
4.2.2 Second test. 5
4.3 Requirement . 5
5 Coaxial cable — Method B . 5
5.1 Preparation of specimens . 5
5.1.1 Required parts/samples . 5
5.1.2 Preparation of samples . 5
5.2 Test method . 6
5.2.1 General. 6
5.2.2 Initial measurement . 6
5.2.3 Sample conditioning . 6
5.2.4 Intermediate measurements . 7
5.2.5 Sample conditioning after tying . 7
5.2.6 Final measurements . 7
5.3 Requirement . 7
6 Quadrax cable. 7
6.1 Preparation of specimens . 7
6.1.1 Required parts/samples . 7
6.1.2 Preparation of samples . 7
6.2 Test method . 7
6.2.1 General. 7
6.2.2 Initial measurement . 7
6.2.3 Sample conditioning . 8
6.2.4 Final measurement . 8
6.3 Requirement . 8
7 Databus cable . 8
7.1 Preparation of specimens . 8
7.1.1 Required parts/samples . 8
7.1.2 Preparation of samples . 8
7.2 Test method . 9
7.2.1 General. 9
7.2.2 Initial measurement . 9
7.2.3 Sample conditioning . 10
7.2.4 Test sequence . 10
7.3 Requirement . 11
Bibliography . 12
European foreword
This document (EN 3475-513:2025) has been prepared by ASD-STAN.
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical text
or by endorsement, at the latest by November 2025, and conflicting national standards shall be
withdrawn at the latest by November 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 3475-513:2020.
...