SIST EN ISO 18541-5:2018

SLOVENSKI STANDARD
01-november-2018
Cestna vozila - Standardizirani dostop do informacij o popravilih in vzdrževanju
avtomobilov (RMI) - 5. del: Posebne zahteve za težka tovorna vozila (ISO 18541-
5:2018)
Road vehicles - Standardized access to automotive repair and maintenance information
(RMI) - Part 5: Heavy duty specific provision (ISO 18541-5:2018)
Straßenfahrzeuge - Standardisierter Zugang zur Reparatur und Wartungsinformationen
(RMI) - Spezifische Anforderungen an den Schwerlastverkehr (ISO 18541-5:2018)
Véhicules routiers - Normalisation de l'accès aux informations relatives à la réparation et
à la maintenance pour l'automobile (RMI) - Partie 5: Titre manque (ISO 18541-5:2018)
Ta slovenski standard je istoveten z: EN ISO 18541-5:2018
ICS:
43.040.15 $YWRPRELOVNDLQIRUPDWLND Car informatics. On board
9JUDMHQLUDþXQDOQLãNLVLVWHPL computer systems
43.180 'LDJQRVWLþQDYGUåHYDOQDLQ Diagnostic, maintenance and
SUHVNXVQDRSUHPD test equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 18541-5
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2018
EUROPÄISCHE NORM
ICS 43.040.15; 43.180
English Version
Road vehicles - Standardized access to automotive repair
and maintenance information (RMI) - Part 5: Heavy duty
specific provision (ISO 18541-5:2018)
Véhicules routiers - Normalisation de l'accès aux Straßenfahrzeuge - Standardisierter Zugang zur
informations relatives à la réparation et à la Reparatur und Wartungsinformationen (RMI) - Teil 5:
maintenance pour l'automobile (RMI) - Partie 5: Spezifische Anforderungen an den Schwerlastverkehr
Dispositions particulières pour les véhicules utilitaires (ISO 18541-5:2018)
lourds (ISO 18541-5:2018)
This European Standard was approved by CEN on 8 June 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18541-5:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 18541-5:2018) has been prepared by Technical Committee ISO/TC 22 "Road
vehicles" in collaboration with Technical Committee CEN/TC 301 “Road vehicles” the secretariat of
which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2019, and conflicting national standards shall
be withdrawn at the latest by March 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 18541-5:2018 has been approved by CEN as EN ISO 18541-5:2018 without any
modification.
INTERNATIONAL ISO
STANDARD 18541-5
First edition
2018-08
Road vehicles — Standardized access
to automotive repair and maintenance
information (RMI) —
Part 5:
Heavy duty specific provision
Véhicules routiers — Normalisation de l'accès aux informations
relatives à la réparation et à la maintenance pour l'automobile
(RMI) —
Partie 5: Dispositions particulières pour les véhicules utilitaires lourds
Reference number
ISO 18541-5:2018(E)
©
ISO 2018
ISO 18541-5:2018(E)
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

ISO 18541-5:2018(E)
Contents Page
Foreword .viii
Introduction .
................................................................................................................................................................................................................................................ix
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and abbreviated terms . 2
4 Document overview and structure . 4
5 General information . 4
5.1 Overview . 4
5.2 Multi stage and RMI . 5
6 Basic principles, use case and requirement overview . 6
6.1 Basic principles. 6
6.2 Basic principles for use case definition . 6
6.3 Basic principles for requirements definition . 7
6.4 Basic principles for functional user interface requirements definition . 7
6.5 Basic principles for conformance test case definition . 7
6.6 Use case clusters . 8
6.7 Requirements clusters .12
6.8 Functional user interface requirements clusters .16
6.9 Main conformance test case clusters .17
7 Use cases .20
7.1 UC 1 User authentication, authorization and administration .20
7.1.1 UC 1.1 Register IO for use of the VM RMI system .20
7.1.2 UC 1.2 Register IO employee for use of the VM RMI system .20
7.1.3 UC 1.3 Maintain IO status .21
7.1.4 UC 1.4 Maintain user status .21
7.1.5 UC 1.5 Request to de-register IO employee .21
7.1.6 UC 1.6 Login to VM RMI system .21
7.1.7 UC 1.7 Grant access to security-related RMI .21
7.2 UC 2 Payment for RMI .21
7.3 UC 3 Vehicle identification .21
7.3.1 UC 3.1 Vehicle identification through use of the VIN .21
7.3.2 UC 3.2 Vehicle type identification via product features .21
7.3.3 UC 3.3 Vehicle identification through product identifier .21
7.3.4 UC 3.4 Unequivocal engine identification .22
7.3.5 UC 3.5 Engine type identification via engine features .22
7.4 UC 4 Provide selection methods for RMI .24
7.4.1 UC 4.1 Select information type .24
7.4.2 UC 4.2 Search by standardized terms .25
7.4.3 UC 4.3 Navigate using product structure .25
7.4.4 UC 4.4 Select by document identifier .25
7.5 UC 5 Retrieve information packages .25
7.5.1 UC 5.1 Workshop procedures .25
7.5.2 UC 5.2 Wiring diagrams .25
7.5.3 UC 5.3 Technical service bulletin .25
7.5.4 UC 5.4 Recall information .26
7.5.5 UC 5.5 Maintenance schedule .26
7.5.6 UC 5.6 Spare parts .26
7.5.7 UC 5.7 Accessories .26
7.5.8 UC 5.8 Labour times .26
7.5.9 UC 5.9 Converted vehicles .27
7.5.10 UC 5.10 Special tools .27
ISO 18541-5:2018(E)
7.5.11 UC 5.11 Type-approval related information .27
7.6 UC 6 Vehicle diagnostics .27
7.6.1 UC 6.1 DTC resolution .27
7.6.2 UC 6.2 VM symptom resolution .27
7.6.3 UC 6.3 Integrated diagnostics .28
7.7 UC 7 Updating, replacing and tuning of modules (ECUs) .28
7.7.1 UC 7.1 Updating and replacing modules .28
7.7.2 UC 7.2 Tuning kit .28
7.8 UC 8 Electronic maintenance history .28
7.9 UC 9 Repair assistance technical support .28
7.10 UC 10 Request contact for specific RMI .28
7.10.1 UC 10.1 Electronic tool information (Diagnostic, Reprogramming, VCI) .28
7.10.2 UC 10.2 Test equipment and diagnostic tool manufacturers.28
7.10.3 UC 10.3 Training material (delegate information) .28
7.10.4 UC 10.4 Redistributors .28
7.10.5 UC 10.5 Republishers .29
7.10.6 UC 10.6 Inspection and testing services .29
7.10.7 UC 10.7 Alternative fuels retrofit systems .29
7.10.8 UC 10.8 Engine and components remanufacturing .29
7.10.9 UC 10.9 Component and parts manufacturers .29
7.10.10  UC 10.10 Validation of independently developed non-proprietary VCIs .29
7.11 UC 11 Courses and training information .29
8 Technical requirements .29
8.1 Requirements cluster — Access-related data administration .29
8.1.1 [TREQ-1] General access-related data administration .29
8.1.2 [TREQ-2] Administration of IO data by the VM .29
8.1.3 [TREQ-3] Administration of IO employee data by the VM .29
8.1.4 [TREQ-4] Administration of payment data by the VM .29
8.1.5 [TREQ-5] Administration of access event data by the VM .29
8.1.6 [TREQ-6] Administration of access event data to security-related RMI by
the VM .30
8.2 Requirements cluster — IT architecture .30
8.2.1 [TREQ-7] Conceptual architecture .30
8.2.2 [TREQ-8] Implementation principles .30
8.3 Requirements cluster — External interfaces .30
8.3.1 [TREQ- 9] Vehicle communication interface (VCI) .30
8.3.2 [TREQ-10] Trust centre (certificate management).30
8.3.3 [TREQ-11] Parts ordering for security-related features .30
8.3.4 [TREQ-12] Partnered accessory provider systems .30
8.4 Requirements cluster — Technical infrastructure .30
8.4.1 [TREQ-13] Type of device .30
8.4.2 [TREQ-14] Hardware features .30
8.4.3 [TREQ-15] Operating systems.30
8.4.4 [TREQ-16] Web browsers .30
8.4.5 [TREQ-17] Presentation formats for information packages .31
8.4.6 [TREQ-18] Internet connection .31
8.4.7 [TREQ-19] Performance of the VM RMI system .31
8.5 Requirements cluster — Co-existence of VM software installed on IO client .31
8.5.1 [TREQ-20] Requirements for installing VM-specific software on the IO client .31
8.5.2 [TREQ-21] Requirements for updating of installed VM data and
applications on the IO client .31
8.5.3 [TREQ-22] Requirements for the operation of VM-specific software on the
IO client .31
8.5.4 [TREQ-23] Requirements for the uninstalling of VM-specific software on
the IO client .31
8.5.5 [TREQ-24] Requirements for restoring in case of an abnormal
termination of the VM-specific software on the IO client .31
8.6 Requirements cluster — Operations .31
iv © ISO 2018 – All rights reserved

ISO 18541-5:2018(E)
8.6.1 [TREQ-25] VM RMI system availability time .31
8.6.2 [TREQ-26] Support for the usage of the VM RMI system .31
8.6.3 [TREQ-27] Operation of the IO PC .31
8.6.4 [TREQ-28] Requirements cluster "functional user interface" .31
8.7 ISO 18541-2:2014, Annex A .32
9 Functional user interface requirements .32
9.1 Requirements cluster 1 — Standardized access mode .32
9.1.1 VM RMI system standardized navigation .32
9.1.2 [FREQ-1] RMI access mode . .32
9.1.3 [FREQ-2] Registration and login support .32
9.2 Requirements cluster 2 — Use cases map .32
9.2.1 [FREQ-3] VM RMI system implemented use cases map .32
9.2.2 [FREQ-4] Download area .33
9.3 Requirements cluster 3 — Navigational pathway .33
9.3.1 [FREQ-5] Navigational pathway .33
10 Conformance test cases .34
10.1 CT cluster 1 — Test technical infrastructure .34
10.1.1 [RMI-CT_TREQ-13, 14, 15, 16, 18, Annex A] Test client configuration .34
10.1.2 [RMI-CT_TREQ-17] Test presentation formats for information packages .34
10.2 CT cluster 2 — Test client's external interfaces .34
10.2.1 [RMI-CT_TREQ-9] Test vehicle communication interface .34
10.2.2 [RMI-CT_TREQ-11] Test parts ordering for security-related features .34
10.2.3 [RMI-CT_TREQ-12] Test partnered accessory provider systems .34
10.3 CT cluster 3 — Test user authentication, authorization and administration .34
10.3.1 [RMI-CT_UC1.1] Test to register IO for use of the VM RMI system .34
10.3.2 [RMI-CT_UC1.2_A] Test to register IO employee for use of the VM RMI
system — Scenario A .34
10.3.3 [RMI-CT_UC1.2_B] Test to register IO employee for use of the VM RMI
system — Scenario B .34
10.3.4 [RMI-CT_UC1.3] Test to maintain IO status .34
10.3.5 [RMI-CT_UC1.4] Test to maintain user status .34
10.3.6 [RMI-CT_UC1.5] Test to de-register an IO employee .34
10.3.7 [RMI-CT_UC1.6] Test login to VM RMI system .34
10.3.8 [RMI-CT_UC1.7] Test for granting access to security-related RMI .35
10.4 CT cluster 4 – Test functional user interface implementation .35
10.4.1 [RMI-CT_FREQ-1] Test for RMI access mode .35
10.4.2 [RMI-CT_FREQ-2] Test for registration and login support .35
10.4.3 [RMI-CT_FREQ-3] Test for implemented use cases map .35
10.4.4 [RMI-CT_FREQ-4] Test for download area .35
10.4.5 [RMI-CT_FREQ-5] Test for navigational pathway .35
10.5 CT cluster 5 – Test payment for RMI .35
10.5.1 [RMI-CT_UC2] Test payment for RMI .35
10.6 CT cluster 6 –Test for vehicle identification .35
10.6.1 [RMI-CT_UC3.1] Test vehicle identification through use of VIN .35
10.6.2 [RMI-CT_UC3.2] Test vehicle identification via product features .35
10.6.3 [RMI-CT_UC3.3] Test vehicle identification through product identifier .35
10.6.4 [RMI-CT_UC3.4] Test unequivocal engine identification .36
10.6.5 [RMI-CT_UC3.5] Test engine type identification via engine features .37
10.7 CT cluster 7 — Test selection methods for RMI .38
10.7.1 [RMI-CT_UC4.1] Test selection of information type .38
10.7.2 [RMI-CT_UC4.2] Test search by standardized terms .38
10.7.3 [RMI-CT_UC4.3] Test navigation using product structure .38
10.7.4 [RMI-CT_UC4.4] Test selection by document identifier .38
10.8 CT cluster 8 – Test retrieval of information packages .38
10.8.1 [RMI-CT_UC5.1.1] Test retrieval of general workshop procedures .38
10.8.2 [RMI-CT_UC5.1.2] Test retrieval of body repair procedures .38
10.8.3 [RMI-CT_UC5.1.3] Test retrieval of temporary repair procedures .38
ISO 18541-5:2018(E)
10.8.4 [RMI-CT_UC5.1.4] Test retrieval of preparation for PTI .38
10.8.5 [RMI-CT_UC5.2] Test retrieval of wiring diagrams .39
10.8.6 [RMI-CT_UC5.3] Test retrieval of technical service bulletin .39
10.8.7 [RMI-CT_UC5.4] Test retrieval of recall information .39
10.8.8 [RMI-CT_UC5.5] Test retrieval of maintenance schedule .39
10.8.9 [RMI-CT_UC5.6.1] Test retrieval of spare parts (identification) .39
10.8.10  [RMI-CT_UC5.6.2] Test retrieval of spare parts (access) .39
10.8.11  [RMI-CT_UC5.7.1] Test retrieval of accessory information factory fitted
(included in general RMI) .39
10.8.12  [RMI-CT_UC5.7.2] Test retrieval of accessory information partnered
with a VM part number .39
10.8.13 [RMI-CT_UC5.7.3] Test retrieval of fitting information for accessories with
no VM part number .39
10.8.14  [RMI-CT_UC5.8] Test retrieval of labour times .39
10.8.15  [RMI-CT_UC5.9] Test retrieval of converted vehicle information .39
10.8.16  [RMI-CT_UC5.10] Test retrieval of special tool information .40
10.8.17  [RMI-CT_UC5.11] Test type-approval related information .40
10.9 CT cluster 9 — Test vehicle diagnostics .40
10.9.1 [RMI-CT_UC6.1] Test DTC resolution .40
10.9.2 [RMI-CT_UC6.2] Test VM symptom resolution .41
10.9.3 [RMI-CT_UC6.3] Test integrated diagnostics .41
10.10 CT cluster 10 — Test updating, replacing and tuning of modules (ECUs).41
10.10.1  [RMI-CT_UC7.1] Test updating and replacing modules information .41
10.10.2  [RMI-CT_UC7.2] Test tuning kit .41
10.11 CT cluster 11 — Test electronic maintenance history .41
10.11.1  [RMI-CT_UC8] Test electronic maintenance history information .41
10.12 CT cluster 12 — Test repair assistance, technical support .41
10.12.1  [RMI-CT_UC9] Test repair assistance technical support information.41
10.13 CT cluster 13 — Test request for contact information .41
10.13.1  [RMI-CT_UC10.1] Test for retrieval of electronic tool information
(Diagnostic, Reprogramming, VCI) .41
10.13.2  [RMI-CT_UC10.2] Test for retrieval of test equipment and diagnostic tool
manufacturers information .41
10.13.3  [RMI-CT_UC10.3] Test for retrieval of training material (delegate
information).41
10.13.4  [RMI-CT_UC10.4] Test for retrieval of redistributor contact information .41
10.13.5  [RMI-CT_UC10.5] Test for retrieval of republisher contact information .42
10.13.6  [RMI-CT_UC10.6] Test for retrieval of inspection and testing services
information .42
10.13.7  [RMI-CT_UC10.7] Test for retrieval of alternative fuels retrofit system
information .42
10.13.8  [RMI-CT_UC10.8] Test for retrieval of engine and components
remanufacturing information .42
10.13.9  [RMI-CT_UC10.9] Test for retrieval of component and parts
manufacturer information .42
10.13.10 .
[RMI-CT_UC10.10] Test for retrieval of validation of independently
developed non-proprietary VCI information.42
10.14 CT cluster 14 — Test courses and training information .42
10.14.1  [RMI-CT_UC11] Test for courses and training information .42
10.15 CT cluster 15 — Test data administration requirements .42
10.15.1  [RMI-CT_TREQ-1] Test general access-related data administration .42
10.15.2  [RMI-CT_TREQ-2] Test administration of IO data by the VM .42
10.15.3  [RMI-CT_TREQ-3] Test administration of IO employee data by the VM .42
10.15.4  [RMI-CT_TREQ-4] Test administration of payment data by VM .42
10.15.5  [RMI-CT_TREQ-5] Test administration of access event data by VM .43
10.15.6  [RMI-CT_TREQ-6] Test administration of access event data to security-
related RMI by VM .43
vi © ISO 2018 – All rights reserved

ISO 18541-5:2018(E)
10.16 CT cluster 16— Test VM software installation on the IO client .43
10.16.1 [RMI-CT_TREQ-20] Test for requirements for installing VM-specific
software on the IO client .43
10.16.2  [RMI-CT_TREQ-21] Test for requirements for updating of installed VM
data and applications on the IO client .43
10.16.3  [RMI-CT_TREQ-22] Test for requirements for the operation of VM-
specific software on the IO client.43
10.16.4  [RMI-CT_TREQ-23] Test for requirements for the uninstalling of VM-
specific software on the IO client.43
10.16.5  [RMI-CT_TREQ-24] Test for requirements for restoring in case of an
abnormal termination of the VM specific software on the IO client .43
10.17 CT cluster 17 — Test VM RMI operations .43
10.17.1  [RMI-CT_TREQ-25] Test for VM RMI system availability time .43
10.17.2  [RMI-CT_TREQ-26] Test for support for the usage of the VM RMI system .43
10.18 CT cluster 18 — Test trust centre (certificate management) .43
10.18.1  [RMI-CT_TREQ-10] Test for trust centre (certificate management) .43
Bibliography .44
ISO 18541-5:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/iso/foreword .html.
This document was prepared by the European Committee for Standardization (CEN) Technical
Committee CEN/TC 301, Road vehicles in collaboration with ISO/TC 22, Road vehicles, Subcommittee
SC 31, Data communication, in accordance with the Agreement on technical cooperation between ISO
and CEN (Vienna Agreement).
A list of all parts in the ISO 18541 series can be found on the ISO website.
viii © ISO 2018 – All rights reserved

ISO 18541-5:2018(E)
Introduction
This set of standards includes the requirements to be fulfilled by Repair and Maintenance Information
(RMI) systems as applied by the
EUROPEAN COMMISSION - ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL, Consumer goods
[1]
— Automotive industry EC mandate M/421
"MANDATE TO THE EUROPEAN STANDARDIZATION ORGANISATIONS FOR STANDARDIZATION IN
THE FIELD OF VEHICLE OBD, REPAIR AND MAINTENANCE INFORMATION"
dated Brussels, 21 January 2008.
This mandate relates to the EC type-approval system for vehicles falling into the scopes of Directives
[4] [2] [3]
2007/46/EC , 2002/24/EC , 2003/37/EC and, in particular, to requirements for access to vehicle
repair and maintenance information by independent operators.
The ISO 18541 series covers the access to automotive repair and maintenance information for light
1) 2)
[4]
passenger and commercial vehicles and heavy duty vehicles based on D
...