SIST EN 3375-003:2009

SLOVENSKI STANDARD
01-maj-2009
$HURQDYWLND(OHNWULþQLNDEOL]DGLJLWDOQLSUHQRVSRGDWNRYGHO(QRMQLRSOHW
RKPRY7LS.*6WDQGDUG]DSURL]YRG
Aerospace series - Cable, electrical, for digital data transmission - Part 003: Single braid
- 77 Ohms - Type KG - Product standard
Luft- und Raumfahrt - Elektrische Leitungen für Digitaldatenübertragungen - Teil 003:
Einfach geschirmt - 77 Ohm - Typ KG - Produktnorm
Série aérospatiale - Câbles électriques pour transmission de données numériques -
Partie 003 : Simple tresse - 77 Ohms - Type KG - Norme de produit
Ta slovenski standard je istoveten z: EN 3375-003:2007
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 3375-003
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2007
ICS 49.060
English Version
Aerospace series - Cable, electrical, for digital data transmission
- Part 003: Single braid - 77 Ohms - Type KG - Product standard
Série aérospatiale - Câbles électriques pour transmission Luft- und Raumfahrt - Elektrische Leitungen für
de données numériques - Partie 003 : Simple tresse - 77 Digitaldatenübertragungen - Teil 003: Einfach geschirmt -
Ohms - Type KG - Norme de produit 77 Ohm - Type KG - Produktnorm
This European Standard was approved by CEN on 23 May 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3375-003:2007: E
worldwide for CEN national Members.

Contents Page
Foreword.3
1 Scope.4
2 Normative references.4
3 Terms and definitions .4
4 Required characteristics.5
4.1 Dimensions and mass.5
4.2 General characteristics.6
4.3 Electrical characteristics.6
5 Tests.6
6 Quality assurance.9
7 Identification and marking (according to EN 3375-002 and TR 6058) .10
7.1 Designation.10
7.2 Short designation.10
7.3 Marking.10
7.4 Colour of the marking on the jacket .10
7.5 Colour of components .10
8 Packaging.11
9 Technical specification.11

Foreword
This document (EN 3375-003:2007) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2008, and conflicting national standards shall be withdrawn at the
latest by May 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

1 Scope
This standard specifies the required characteristics of single braid, 77 Ohms, size 24 electrical cable type KG,
intended for digital data transmissions.
General characteristics are given in 4.2.
Main electrical characteristics are given in 4.3.
It shall be used together with EN 3375-001 and EN 3375-002.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
EN 2083, Aerospace series — Copper or copper alloy conductors for electrical cables — Product standard.
EN 2084, Aerospace series — Cables, electric, single-core, general purpose, with conductors in copper or
copper alloy — Technical specification.
EN 3375-001, Aerospace series — Cable, electrical, for digital data transmission — Part 001: Technical
1)
specification.
1)
EN 3375-002, Aerospace series — Cable, electrical, for digital data transmission — Part 002: General.
*
EN 3475-100 , Aerospace series — Cables, electrical, aircraft use — Test methods — Part 100: General.
EN 9133, Aerospace series — Quality management systems — Qualification Procedure for aerospace

standard parts.
2)
TR 6058, Aerospace series — Cable code identification list.
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 3475-100 apply.

*
All part
...