SIST EN 13016-1:2018
(Main)Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
This European Standard specifies a method for the determination of the air saturated vapour pressure (ASVP) (total vapour pressure), exerted in vacuo, by volatile, low viscosity petroleum products, components, ethanol blends up to 85 % (V/V), and feedstocks containing air. A dry vapour pressure equivalent (DVPE) can be calculated from the air containing vapour pressure (ASVP) measurement.
The conditions used in the test described in this standard are a vapour-to-liquid ratio of 4:1 and a test temperature of 37,8 °C.
The equipment is not wetted with water during the test, and the method described is therefore suitable for testing samples with or without oxygenates; no account is taken of dissolved water in the sample.
This method described is suitable for testing air saturated samples with a DVPE between 15,5 kPa and 106,0 kPa; vapour pressures outside this range can be measured but the precision has not been determined.
This document is applicable to fuels containing oxygenated compounds up to the limits stated in the relevant Council Directive 85/536/EEC [10], and for ethanol-fuel blends up to 85 % (V/V) ethanol.
NOTE For the purposes of this European Standard, the terms "% (m/m)" and "% (V/V)" are used to represent the mass and volume fractions respectively.
WARNING - The use of this standard can involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of users of this standard to take appropriate measures to ensure the safety and health of personnel prior to application of the standard, and fulfil statutory and regulatory requirements for this purpose.
Flüssige Mineralölerzeugnisse - Dampfdruck - Teil 1: Bestimmung des luftgesättigten Dampfdruckes (LGDD) und des berechneten Trockendampfdruckes (BTDD)
Diese Europäische Norm legt ein Verfahren zur Bestimmung des luftgesättigten Dampfdruckes (en: air saturated vapour pressure, ASVP) (absoluter Dampfdruck) fest, der im Vakuum von flüchtigen, niedrigviskosen Mineralölerzeugnissen, Komponenten, Ethanol-Blends bis zu 85 % (V/V) und Einsatz-produkten, die Luft enthalten, ausgeübt wird. Der dem trockenen Dampfdruck entsprechende Druck (en: dry vapour pressure equivalent, DVPE) kann anhand des Messwertes für den luftgesättigten Dampfdruck berechnet werden.
Die in der in dieser Norm beschriebenen Prüfung verwendeten Bedingungen sind ein Dampf Flüssigkeits-verhältnis von 4 : 1 und eine Prüftemperatur von 37,8 °C.
Das Prüfgerät wird während der Prüfung nicht mit Wasser benetzt, das beschriebene Verfahren ist daher für Proben sowohl mit als auch ohne sauerstoffhaltige Komponenten geeignet; in der Probe gelöstes Wasser wird nicht berücksichtigt.
Dieses beschriebene Verfahren ist für die Prüfung luftgesättigter Proben mit einem DVPE zwischen 15,5 kPa und 106,0 kPa geeignet; Dampfdrücke außerhalb dieses Bereiches können gemessen werden, die Präzision wurde jedoch nicht ermittelt.
Dieses Dokument ist anwendbar auf Kraftstoffe, die sauerstoffhaltige Komponenten bis hin zu den in der maßgebenden Richtlinie des Rates 85/536/EWG [10] angegebenen Grenzen enthalten, sowie für Ethanol-Kraftstoff-Gemische mit einem Ethanolanteil von bis zu 85 % (V/V).
ANMERKUNG Für die Zwecke dieser Europäischen Norm werden die Bezeichnungen "% (m/m)" und " (V/V)" zur Angabe des Massenanteils bzw. des Volumenanteils verwendet.
WARNUNG - Die Anwendung dieser Norm kann die Anwendung gefährlicher Stoffe, Arbeitsgänge und Geräte mit sich bringen. Diese Norm beansprucht nicht, alle damit verbundenen Sicherheits¬probleme zu behandeln. Es liegt in der Verantwortung des Anwenders dieser Norm, vor ihrer Anwendung geeignete Maßnahmen für die Sicherheit und den Gesundheitsschutz des Personals zu ergreifen, und dafür Sorge zu tragen, dass behördliche und gesetzliche Maßnahmen eingehalten werden.
Produits pétroliers liquides - Pression de vapeur - Partie 1 : Détermination de la pression de vapeur saturée en air (PVSA) et de la pression de vapeur séche calculée (PVSC)
Tekoči naftni proizvodi - Parni tlak - 1. del: Določevanje z zrakom nasičenega parnega tlaka (ASVP) in enakovrednega parnega tlaka suhega zraka (DVPE)
Ta evropski standard določa metodo za določevanje skupnega tlaka, ki ga v vakuumu proizvedejo hlapni nizkoviskozni naftni proizvodi, komponente in vhodne surovine, ki vsebujejo zrak, vključno z oksigeniranimi gorivi z največ 3,7-odstotnim deležem kisika in etanolom (E85) za motorna goriva. Enakovredni parni tlak suhega zraka (DVPE) je mogoče izračunati z meritvijo z zrakom nasičenega parnega tlaka (ASVP). Pogoji, uporabljeni v preskusu, ki je opisan v tem standardu, so: razmerje pare in tekočine 4:1, vzorec v velikosti od 700 ml do 800 ml in preskusna temperatura 37,8 °C.
Opisana metoda je ustrezna za preskušanje z zrakom nasičenih vzorcev, ki proizvedejo z zrakom nasičeni parni tlak med 9 kPa in 150 kPa pri 37,8 °C.
General Information
- Status
- Withdrawn
- Public Enquiry End Date
- 06-Dec-2016
- Publication Date
- 07-May-2018
- Withdrawal Date
- 17-Jul-2024
- Technical Committee
- NAD - Petroleum products, lubricants and related products
- Current Stage
- 9900 - Withdrawal (Adopted Project)
- Start Date
- 17-Jul-2024
- Due Date
- 09-Aug-2024
- Completion Date
- 18-Jul-2024
Relations
- Effective Date
- 01-Jun-2018
- Effective Date
- 01-Sep-2024
Frequently Asked Questions
SIST EN 13016-1:2018 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)". This standard covers: This European Standard specifies a method for the determination of the air saturated vapour pressure (ASVP) (total vapour pressure), exerted in vacuo, by volatile, low viscosity petroleum products, components, ethanol blends up to 85 % (V/V), and feedstocks containing air. A dry vapour pressure equivalent (DVPE) can be calculated from the air containing vapour pressure (ASVP) measurement. The conditions used in the test described in this standard are a vapour-to-liquid ratio of 4:1 and a test temperature of 37,8 °C. The equipment is not wetted with water during the test, and the method described is therefore suitable for testing samples with or without oxygenates; no account is taken of dissolved water in the sample. This method described is suitable for testing air saturated samples with a DVPE between 15,5 kPa and 106,0 kPa; vapour pressures outside this range can be measured but the precision has not been determined. This document is applicable to fuels containing oxygenated compounds up to the limits stated in the relevant Council Directive 85/536/EEC [10], and for ethanol-fuel blends up to 85 % (V/V) ethanol. NOTE For the purposes of this European Standard, the terms "% (m/m)" and "% (V/V)" are used to represent the mass and volume fractions respectively. WARNING - The use of this standard can involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of users of this standard to take appropriate measures to ensure the safety and health of personnel prior to application of the standard, and fulfil statutory and regulatory requirements for this purpose.
This European Standard specifies a method for the determination of the air saturated vapour pressure (ASVP) (total vapour pressure), exerted in vacuo, by volatile, low viscosity petroleum products, components, ethanol blends up to 85 % (V/V), and feedstocks containing air. A dry vapour pressure equivalent (DVPE) can be calculated from the air containing vapour pressure (ASVP) measurement. The conditions used in the test described in this standard are a vapour-to-liquid ratio of 4:1 and a test temperature of 37,8 °C. The equipment is not wetted with water during the test, and the method described is therefore suitable for testing samples with or without oxygenates; no account is taken of dissolved water in the sample. This method described is suitable for testing air saturated samples with a DVPE between 15,5 kPa and 106,0 kPa; vapour pressures outside this range can be measured but the precision has not been determined. This document is applicable to fuels containing oxygenated compounds up to the limits stated in the relevant Council Directive 85/536/EEC [10], and for ethanol-fuel blends up to 85 % (V/V) ethanol. NOTE For the purposes of this European Standard, the terms "% (m/m)" and "% (V/V)" are used to represent the mass and volume fractions respectively. WARNING - The use of this standard can involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of users of this standard to take appropriate measures to ensure the safety and health of personnel prior to application of the standard, and fulfil statutory and regulatory requirements for this purpose.
SIST EN 13016-1:2018 is classified under the following ICS (International Classification for Standards) categories: 17.100 - Measurement of force, weight and pressure; 75.160.20 - Liquid fuels. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 13016-1:2018 has the following relationships with other standards: It is inter standard links to SIST EN 13016-1:2007, SIST EN 13016-1:2024. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase SIST EN 13016-1:2018 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.'93(Flüssige Mineralölerzeugnisse - Dampfdruck - Teil 1: Bestimmung des luftgesättigten Dampfdruckes (LGDD) und des berechneten Trockendampfdruckes (BTDD)Produits pétroliers liquides - Pression de vapeur - Partie 1 : Détermination de la pression de vapeur saturée en air (PVSA) et de la pression de vapeur séche calculée (PVSC)Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)75.160.20Liquid fuels17.100Merjenje sile, teže in tlakaMeasurement of force, weight and pressureICS:Ta slovenski standard je istoveten z:EN 13016-1:2018SIST EN 13016-1:2018en,fr,de01-junij-2018SIST EN 13016-1:2018SLOVENSKI
STANDARDSIST EN 13016-1:20071DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13016-1
April
t r s z ICS
y wä s x rä t r Supersedes EN
s u r s xæ sã t r r yEnglish Version
Liquid petroleum products æ Vapour pressure æ Part
sã Produits pétroliers liquides æ Pression de vapeur æ Partie
s ã Détermination de la pression de vapeur
Flüssige Mineralölerzeugnisse æ Dampfdruck æ Teil
sã und des berechneten dem trockenen Dampfdruck This European Standard was approved by CEN on
t y November
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s u r s xæ sã t r s z ESIST EN 13016-1:2018
Precision for elevated temperature and smaller sample containers . 13 Annex B (normative)
Accepted reference values . 14 Bibliography . 16
0,8 kPa and a resolution of
0,1 kPa with calibration/verification traceable to national measurement standards. 6.1.5 If a vacuum pump is required for use with the instrument, it shall be capable of reducing the pressure in the test chamber to less than 0,01 kPa absolute. 6.1.6 If a vacuum-tight syringe or similar equipment is required for measuring or injecting the required volume of sample into the test chamber, it shall be sized appropriately to the required sample size with an accuracy of at least 1 %. 6.2 Cooling equipment, iced-water bath or refrigerator, capable of cooling the samples and any syringes (6.1.6) used, to a temperature of between 0 °C and 1 °C, where a suitably safe refrigerator should be used with highly volatile petroleum products. 6.3 Barometer, capable of measuring atmospheric pressure within an accuracy of 0,1 kPa or better and with calibration/verification traceable to national measurement standards. 6.4 Vacuum gauge, covering at least the range 0,01 kPa to 0,67 kPa, with an accuracy and resolution of ± 0,1 kPa with calibration/verification traceable to national measurement standards. 7 Sampling 7.1 Due to the extreme sensitivity of vapour pressure measurements to losses through evaporation and the resulting changes in composition, the utmost precaution and the most meticulous care shall be taken in the drawing and handling of samples. 7.2 Samples shall be drawn in accordance with EN ISO 3170 and/or in accordance with the requirements of National Standards for the sampling of the product under test. However, the water displacement technique shall not be used. The drawing of samples using automatic techniques, such as those described in EN ISO 3171 [2], is not recommended unless the technique has been proven not to lose light ends from the product or component being sampled. Loss of light ends can affect the vapour pressure measurement. 7.3 For routine testing, the sample shall be supplied in a sealed container, constructed of suitable material, of at least 250 ml capacity. The container shall be a minimum of 70 % (V/V) full of sample at the time of receipt. See also 15.1. 7.4 Protect samples from excessive temperatures, as soon as possible, prior to testing. This can be accomplished by storage in the cooling equipment (6.2). 7.5 Samples in leaking containers shall not be considered for testing, but shall be discarded and new samples obtained. SIST EN 13016-1:2018
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...