SIST EN 13082:2009+A1:2012
(Main)Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve
Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve
This European Standard covers the vapour transfer valve, used for the transfer of vapour between the tank compartment and the pipework connecting to the vapour collection adaptor.
This European Standard specifies the performance requirements and the critical dimensions of the vapour transfer valve. It also specifies the tests necessary to verify the compliance of the equipment with this European Standard. The equipment specified by this standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR [2] which have a vapour pressure not exceeding 110 kPa at 50 °C and petrol, and which have no sub-classification as toxic or corrosive.
Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - Gaspendelventil
Diese Europäische Norm behandelt das Gaspendelventil, das zur Weiterleitung von Gas zwischen dem
Tankabteil und der Verbindungsleitung zur VKG-Kupplung dient.
In dieser Europäischen Norm sind die Leistungsanforderungen und die wesentlichen Maße des
Gaspendelventils festgelegt. Weiterhin sind die Prüfungen festgelegt, mit denen nachgewiesen werden kann,
ob die Ausrüstung den Anforderungen dieser Europäischen Norm entspricht. Die in dieser Norm beschriebene
Ausrüstung ist zum Umfüllen flüssiger Erdölerzeugnisse und anderer gefährlicher Güter der Klasse 3 des
ADR [2] geeignet, deren Dampfdruck bei 50 °C max. 110 kPa beträgt (einschließlich Ottokraftstoff) und die
nicht als giftig oder ätzend eingestuft sind.
Citernes de transport de matières dangereuses - Équipement de service pour citernes - Évent de transfert des vapeurs récupérées
La présente Norme européenne traite de l’évent de transfert des vapeurs récupérées utilisé pour le transfert des vapeurs entre la citerne et la tuyauterie de raccordement à l’adaptateur pour la récupération des vapeurs.
La présente Norme européenne spécifie les caractéristiques de performance et les dimensions essentielles de l’évent de transfert des vapeurs récupérées. Elle spécifie également les essais à réaliser pour vérifier la conformité des équipements à la présente Norme européenne. Les équipements spécifiés par la présente norme conviennent à une utilisation avec des produits pétroliers liquides et autres matières dangereuses de la classe 3 de l’ADR [2], dont la tension de vapeur ne dépasse pas 110 kPa à 50 °C (y compris l’essence), et qui n’appartiennent à aucune sous-classe de produits toxiques ou corrosifs.
Cisterne za prevoz nevarnega blaga - Oprema za obratovanje cistern - Ventil za izenačitev parnega tlaka (vključno z dopolnilom A1)
Ta evropski standard zajema ventil za izenačitev parnega tlaka, ki se uporablja za prenos pare med oddelkom s cisterno in cevovodom, ki je povezan s spojko za zbiralnik pare. Ta evropski standard določa zahteve za učinkovitost in kritične mere ventila za izenačitev parnega tlaka. Določa tudi preskuse, potrebne za preverjanje skladnosti opreme s tem evropskim standardom. Oprema, ki jo določa ta standard, je primerna za uporabo s tekočimi naftnimi proizvodi in drugimi nevarnimi snovmi kategorije 3 ADR, katerih parni tlak ne presega 110 kPa pri 50 °C, ter z motornim bencinom, pri čemer niso dodatno opredeljeni kot strupeni ali korozivni.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - GaspendelventilCiternes de transport de matières dangereuses - Équipement de service pour citernes - Évent de transfert des vapeurs récupéréesTanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve23.060.20Zapirni ventili (kroglasti in pipe)Ball and plug valves23.020.20Posode in vsebniki, montirani na vozilaVessels and containers mounted on vehicles13.300Varstvo pred nevarnimi izdelkiProtection against dangerous goodsICS:Ta slovenski standard je istoveten z:EN 13082:2008+A1:2012SIST EN 13082:2009+A1:2012en,fr,de01-junij-2012SIST EN 13082:2009+A1:2012SLOVENSKI
STANDARDSIST EN 13082:20091DGRPHãþD
SIST EN 13082:2009+A1:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13082:2008+A1
February 2012 ICS 13.300; 23.020.20; 23.060.20 Supersedes EN 13082:2008English Version
Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve
Citernes de transport de matières dangereuses - Équipement de service pour citernes - Évent de transfert des vapeurs récupérées
Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - Gaspendelventil This European Standard was approved by CEN on 13 September 2008 and includes Amendment 1 approved by CEN on 24 December 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13082:2008+A1:2012: ESIST EN 13082:2009+A1:2012
EN 13082:2008+A1:2012 (E) 2 Contents Page Foreword .3Introduction .51Scope .62Normative references .63Terms and definitions .64Functions .75Design characteristics .75.1General .75.2Performance characteristics .75.3Temperature range .75.4Actuation .75.5Materials of construction .75.6Dimensional characteristics .85.6.1Maximum height.85.6.2Flanged connection type .85.6.3Through hole connection type .86Tests .86.1General .86.2Production tests.86.2.1General .86.2.2Shell tightness test .96.2.3Internal seat tightness test .96.2.4Operability test .96.2.5Test results .96.3Type tests .96.3.1General .96.3.2Shell strength test. 106.3.3Shell tightness test . 106.3.4Internal seat tightness test . 106.3.5Mechanical endurance test . 106.3.6Drop test . 116.3.7Test results . 127Marking . 128Installation, operation and maintenance instructions . 12Annex A (normative)
Drop test apparatus . 13Annex B (normative)
Maximum height - Installation requirement . 14Bibliography . 15 SIST EN 13082:2009+A1:2012
EN 13082:2008+A1:2012 (E) 3 Foreword This document (EN 13082:2008+A1:2012) has been prepared by Technical Committee CEN/TC 296 “Tanks for transport of dangerous goods”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2012, and conflicting national standards shall be withdrawn at the latest by August 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes !EN 13082:2008". This document includes Amendment 1 approved by CEN on 2011-12-24. The start and finish of text introduced or altered by amendment is indicated in the text by tags !". This European Standard has been submitted for reference into the RID and/or in the technical annexes of the ADR [2]. !deleted text" This European Standard forms part of a coherent standards programme comprising the following standards,, under the general title "Tanks for transport of dangerous goods - Service equipment for tanks": EN 13081, Vapour collection adaptor and coupler EN 13082, Vapour transfer valve EN 13083, Adaptor for bottom loading and unloading EN 13308, Non-pressure balanced footvalve EN 13314, Fill hole cover EN 13315, Gravity discharge coupler EN 13316, Pressure balanced footvalve EN 13317, Manhole cover assembly EN 13922, Overfill prevention systems for liquid fuels EN 14595, Pressure and Vacuum Breather Vent EN 14596, Emergency pressure relief valve EN 15208, Sealed parcel delivery systems – Working principles and interface specifications The standards programme also includes the following Technical Report: CEN/TR 15120, Guidance and recommendations for loading, transport and unloading. !Compared to EN 13082:2008 the following changes have been made: a) in the Foreword, the second sentence of the fifth paragraph has been deleted; SIST EN 13082:2009+A1:2012
EN 13082:2008+A1:2012 (E) 4 b) in Clause 4, it has been added that the vapour transfer valve shall be provided with a means to indicate that it is open." According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 13082:2009+A1:2012
EN 13082:2008+A1:2012 (E) 5 Introduction The vapour transfer valve is part of the vapour collection system that is required to comply with the European Directive 94/63/EC on Volatile Organic Compounds (VOC) [1]. The vapour transfer valve, subject of this European Standard, governs the transfer of vapour between the vehicle compartment, the gantry equipment and the service-station tank storage during loading and unloading operations. SIST EN 13082:2009+A1:2012
EN 13082:2008+A1:2012 (E) 6 1 Scope This European Standard covers the vapour transfer valve, used for the transfer of vapour between the tank compartment and the pipework connecting to the vapour collection adaptor. This European Standard specifies the performance requirements and the critical dimensions of the vapour transfer valve. It also specifies the tests necessary to verify the compliance of the equipment with this European Standard. The equipment specified by this standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR [2] which have a vapour pressure not
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.