SIST EN 2573:2022

SLOVENSKI STANDARD
SIST EN 2573:2022
01-december-2022
Nadomešča:
SIST EN 2573:2007
Aeronavtika - Jeklo X6CrNiTi18-10 (1.4541) - Taljeno na zraku - Popuščano - Žice -
0,25 mm ≤ De ≤ 3 mm - Rm ≤ 780 MPa
Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Wires - 0,25
mm ≤ De ≤ 3 mm - Rm ≤ 780 MPa
Luft- und Raumfahrt - Stahl X6CrNiTi18-10 (1.4541) - Lufterschmolzen - Weichgeglüht -
Drähte - 0,25 mm ≤ De ≤ 3 mm - Rm ≤ 780 MPa
Série aérospatiale - Acier X6CrNiTi18-10 (1.4541) - Élaboré à l'air - Adouci - Fils - 0,25
mm ≤ De ≤ 3 mm - Rm ≤ 780 MPa
Ta slovenski standard je istoveten z: EN 2573:2022
ICS:
49.025.10 Jekla Steels
77.140.65 Jeklene žice, jeklene vrvi in Steel wire, wire ropes and
verige link chains
SIST EN 2573:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 2573:2022

---------------------- Page: 2 ----------------------
SIST EN 2573:2022


EN 2573
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2022
EUROPÄISCHE NORM
ICS 49.025.10 Supersedes EN 2573:2007
English Version

Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air
melted - Softened - Wires - 0,25 mm  D  3 mm - R 
e m
780 MPa
Série aérospatiale - Acier X6CrNiTi18-10 (1.4541) - Luft- und Raumfahrt - Stahl X6CrNiTi18-10 (1.4541) -
Élaboré à l'air - Adouci - Fils - 0,25 mm  D  3 mm - Lufterschmolzen - Weichgeglüht - Drähte - 0,25 mm 
e
R  780 MPa D  3 mm - R  780 MPa
m e m
This European Standard was approved by CEN on 8 May 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
C O M I T É E U R O P É E N D E N O R M A L I S A T I O N

E U R O P Ä I S C H E S K O M I T E E F Ü R N O R M U N G

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2573:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 2573:2022
EN 2573:2022 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9

2

---------------------- Page: 4 ----------------------
SIST EN 2573:2022
EN 2573:2022 (E)
European foreword
This document has been prepared by the Aerospace and Defence Industries Association of Europe —
Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document shall be given the status of a national standard, eith
...