iTeh Standards logo
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60947-5-1:2018/AC:2020

(Corrigendum)

Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices (IEC 60947-5-1:2016/COR2:2020)

Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices (IEC 60947-5-1:2016/COR2:2020)

TAN - // IEC Corrigendum

Niederspannungsschaltgeräte - Teil 5-1: Steuergeräte und Schaltelemente – Elektromechanische Steuergeräte (IEC 60947-5-1:2016/COR2:2020)

Appareillage à basse tension - Partie 5-1: Appareils et éléments de commutation pour circuits de commande - Appareils électromécaniques pour circuits de commande (IEC 60947-5-1:2016/COR2:2020)

Nizkonapetostne stikalne in krmilne naprave - 5-1. del: Krmilne naprave in stikalni elementi - Elektromehanske krmilne naprave - Popravek AC (IEC 60947-5-1:2016/COR2:2020)

General Information

Status
Published
Publication Date
27-May-2020
ICS
29.120.40 - Switches
29.130.20 - Low voltage switchgear and controlgear
Technical Committee
SKA - Switchgear and control gear
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
27-May-2020
Due Date
01-Aug-2020
Completion Date
28-May-2020
Directive
2014/30/EU - Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
Mandate
M/511 - Mandate to CEN, CENELEC and ETSI relating to harmonised standards in the field of the Low Voltage Directive
M/552 - [C(2016) 7641 final] Standardisation request as regards harmonised standards in support of Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility
Ref Project
EN 60947-5-1:2017/AC:2020-05 - Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices

Relations

Replaced By
SIST EN IEC 60947-5-1:2025 - Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices (IEC 60947-5-1:2024)
Effective Date
01-Jun-2025
Corrects
SIST EN 60947-5-1:2018 - Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices (IEC 60947-5-1:2016)
Effective Date
12-May-2020
SIST EN 60947-5-1:2018/AC:2020SIST EN 60947-5-1:2018/AC:2020
PreviousNext
Corrigendum
SIST EN 60947-5-1:2018/AC:2020
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2020
Nizkonapetostne stikalne in krmilne naprave - 5-1. del: Krmilne naprave in stikalni
elementi - Elektromehanske krmilne naprave - Popravek AC (IEC 60947-5-
1:2016/COR2:2020)
Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching
elements - Electromechanical control circuit devices (IEC 60947-5-1:2016/COR2:2020)
Niederspannungsschaltgeräte - Teil 5-1: Steuergeräte und Schaltelemente –
Elektromechanische Steuergeräte (IEC 60947-5-1:2016/COR2:2020)
Appareillage à basse tension - Partie 5-1: Appareils et éléments de commutation pour
circuits de commande - Appareils électromécaniques pour circuits de commande (IEC
60947-5-1:2016/COR2:2020)
Ta slovenski standard je istoveten z: EN 60947-5-1:2017/AC:2020-05
ICS:
29.130.20 Nizkonapetostne stikalne in Low voltage switchgear and
krmilne naprave controlgear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60947-5-1:2017/AC:2020-
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2020
ICS 29.120.40; 29.130.20
English Version
Low-voltage switchgear and controlgear - Part 5-1: Control
circuit devices and switching elements - Electromechanical
control circuit devices
(IEC 60947-5-1:2016/COR2:2020)
Appareillage à basse tension - Partie 5-1: Appareils et Niederspannungsschaltgeräte - Teil 5-1: Steuergeräte und
éléments de commutation pour circuits de commande - Schaltelemente - Elektromechanische Steuergeräte
Appareils électromécaniques pour circuits de commande (IEC 60947-5-1:2016/COR2:2020)
(IEC 60947-5-1:2016/COR2:2020)
This corrigendum becomes effective on 15 M
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

Frequently Asked Questions

SIST EN 60947-5-1:2018/AC:2020 is a corrigendum published by the Slovenian Institute for Standardization (SIST). Its full title is "Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices (IEC 60947-5-1:2016/COR2:2020)". This standard covers: TAN - // IEC Corrigendum

TAN - // IEC Corrigendum

SIST EN 60947-5-1:2018/AC:2020 is classified under the following ICS (International Classification for Standards) categories: 29.120.40 - Switches; 29.130.20 - Low voltage switchgear and controlgear. The ICS classification helps identify the subject area and facilitates finding related standards.

SIST EN 60947-5-1:2018/AC:2020 has the following relationships with other standards: It is inter standard links to SIST EN IEC 60947-5-1:2025, SIST EN 60947-5-1:2018. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

SIST EN 60947-5-1:2018/AC:2020 is associated with the following European legislation: EU Directives/Regulations: 2014/30/EU, 2014/35/EU; Standardization Mandates: M/511, M/552. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

You can purchase SIST EN 60947-5-1:2018/AC:2020 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.

記事のタイトル：SIST EN 60947-5-1：2018/AC：2020 - 低電圧スイッチギアおよび制御機器 - 部品5-1：制御回路装置およびスイッチング要素 - 電磁制御回路装置（IEC 60947-5-1：2016/COR2：2020） 記事の内容：この記事では、SIST EN 60947-5-1：2018/AC：2020規格について説明しています。この規格は低電圧スイッチギアおよび制御機器に関連しており、特に制御回路装置およびスイッチング要素、特に電磁制御回路装置に焦点を当てています。同時に、IEC 60947-5-1：2016/COR2：2020規格についても言及されています。

기사 제목: SIST EN 60947-5-1:2018/AC:2020 - 저압 스위치기어 및 제어기어 - 제5-1부: 제어 회로 기기 및 스위칭 요소 - 전기기계 제어 회로 기기 (IEC 60947-5-1:2016/COR2:2020) 기사 내용: TAN - // IEC Corrigendum 해당 기사는 SIST EN 60947-5-1:2018/AC:2020 표준을 다루고 있는데, 이는 저압 스위치기어 및 제어기어에 관련되어 있습니다. 특히, 제어 회로 기기 및 스위칭 요소, 특히 전기기계 제어 회로 기기에 초점을 맞추고 있습니다. 이 표준은 IEC 60947-5-1:2016 표준의 수정 사항 (corrigendum)입니다.

기사 제목: SIST EN 60947-5-1:2018/AC:2020 - 저압 스위치기어 및 제어기어 - 파트 5-1: 제어 회로 장치와 스위칭 요소 - 전기기계 제어 회로 장치 (IEC 60947-5-1:2016/COR2:2020) 기사 내용: 이 기사는 SIST EN 60947-5-1:2018/AC:2020 규격에 대해 다루고 있으며, 이는 저압 스위치기어 및 제어기어에 관련된 것입니다. 이 규격은 특히 제어 회로 장치와 스위칭 요소, 특히 전기기계 제어 회로 장치에 중점을 둡니다. 동시에 IEC 60947-5-1:2016/COR2:2020 규격에 대해서도 언급하고 있습니다.

記事のタイトル：SIST EN 60947-5-1:2018/AC:2020 - 低電圧スイッチギアおよび制御ギア - 第5-1部：制御回路装置およびスイッチング要素 - 電気機械制御回路装置（IEC 60947-5-1:2016/COR2:2020） 記事の内容：TAN - // IEC Corrigendum この記事では、SIST EN 60947-5-1:2018/AC:2020規格について取り上げています。この規格は、低電圧スイッチギアおよび制御ギアに関連しており、具体的には制御回路装置およびスイッチング要素、特に電気機械制御回路装置に焦点を当てています。この規格は、IEC 60947-5-1:2016規格の修正（corrigendum）となります。

The article discusses the SIST EN 60947-5-1:2018/AC:2020 standard, which relates to low-voltage switchgear and controlgear. It specifically focuses on control circuit devices and switching elements, particularly electromechanical control circuit devices. The IEC 60947-5-1:2016/COR2:2020 is also mentioned in relation to this standard.

The article discusses the SIST EN 60947-5-1:2018/AC:2020 standard, which pertains to low-voltage switchgear and controlgear. Specifically, it focuses on control circuit devices and switching elements, specifically electromechanical control circuit devices. The standard is an amendment (corrigendum) to the IEC 60947-5-1:2016 standard.

This May Also Interest You

SIST
SIST EN IEC 62626-1:2025(Main)
Low-voltage switchgear and controlgear enclosed equipment - Part 1: Additional requirements for enclosed switch-disconnectors in accordance with IEC 60947-3 - Isolation of electrical equipment during repair and maintenance work in specific applications (IEC 62626-1:2023)
EN IEC 62626-1:2025

IEC 62626-1:2023 is available as IEC 62626-1:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 62626-1:2023 applies to enclosed switches-disconnectors with rated voltages up to 1 000 V AC for repair and maintenance work or cleaning work in load circuits. Devices within the scope of this document are switch-disconnectors in accordance with IEC 60947-3 with specific additional requirements. Enclosed switch-disconnectors in this document are suitable for isolation in accordance with the IEC 60947 series and are not equipped with means for remote control or automatic switching to avoid unexpected or accidental start. These devices are not used for operational switching, for example quick start and stop, jogging. This second edition cancels and replaces the first edition published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) update of this document based on IEC 60947-1:2020.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60947-9-2:2025(Main)
Low-voltage switchgear and controlgear - Part 9-2: Active arc-fault mitigation systems - Optical-based internal arc-detection and mitigation devices (IEC 60947-9-2:2021)
EN IEC 60947-9-2:2025

This document covers internal arc-fault control devices, hereinafter referred to as IACD, which
are intended to:
- detect internal arc-faults in low-voltage switchgear and controlgear assemblies, by
processing (at a minimum) the optical effect of an internal arc-fault, and
- operate mitigation device (either external or combined)
in order to minimize the effects of the internal arc-fault (see Figure 1).
For the purpose of this document the terms "light" or "optical" covers more than visible spectra.
They may cover also, for example, infrared or ultraviolet electromagnetic radiations (see
Annex D).
For combined-type IACD, this document is considered in addition to the relevant product
standard for internal arc-fault mitigation devices (IARD per IEC TS 63107:2020). Compliance
to the relevant product standard is mandatory and cannot be claimed by testing to this document
alone.
NOTE 1 Low-voltage switchgear and controlgear assemblies are usually described by IEC 61439 series.
[Figure 1]
Therefore, this document covers the following:
- internal arc-fault control device (stand-alone, multifunction or combined);
- one or more associated sensor(s) used to detect optical effect of the internal arc-fault;
- sensor(s), sensing another physical effect, to confirm the fault;
- associated or combined mitigation device.
An IACD is not intended to trigger under normal operation of low-voltage switchgear and
controlgear (i.e. absence of internal arc-fault), including normal arcing associated with
operation of disconnecting and switching devices.
This document only covers the following methods:
- optical detection of the light caused by an internal arc-fault;
- optional confirmation of internal arc-fault by line current measurement.
Many different conductive materials could be used in LV assemblies (e.g. steel, copper,
aluminium). Nevertheless, tests specified in this document are deemed to represent the most
critical and challenging conditions for arc-detection and cover all combinations of conductive
materials.
NOTE 2 Compared to other materials (e.g. steel, aluminium), copper leads to a lower optical radiation energy.
The rated voltage of the assembly in which an IACD is installed does not exceed 1 000 V AC.
Such devices are designed to be operated and maintained by skilled persons only.
This document does not cover:
- DC internal arc-fault detection and control;
- overcurrent relays;
- AFDD (arc-fault detection devices) as defined by IEC 62606;
- guidance on installation within assemblies;
NOTE 3 The integration of an IACD into an assembly is described in IEC TS 63107.
- use with additional measures needed for installation and operation within explosive
atmospheres. These are given in IEC 60079 series documents;
- requirements for embedded software and firmware design rules; for this subject, the
manufacturer is responsible for taking additional safety measures;
NOTE 4 IEC TR 63201 describes rules for firmware and embedded software development preventing errors in
software.
- cybersecurity aspects; for this subject, the manufacturer is responsible for taking additional
safety measures;
NOTE 5 See IEC TS 63208.
- mobile applications.
NOTE 6 Even when addressing internal arc-fault mitigation devices, this document does not supersede any other
relevant product standard (e.g. IEC 60947-2 or IEC 60947-9-1).
NOTE 7 DC arcing fault phenomena are under consideration. Further investigation is needed to comprehend DC
arcing phenomena and required sensing.

  • Standard
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60947-3:2021/A1:2025(Amendment)
Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units (IEC 60947-3:2020/AMD1:2025)
EN IEC 60947-3:2021/A1:2025
  • Amendment
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60947-5-1:2025(Main)
Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices (IEC 60947-5-1:2024)
EN IEC 60947-5-1:2025

IEC 60947-5-1:2024 applies to control circuit devices and switching elements intended for controlling, signalling, interlocking, etc., of switchgear and controlgear.
It applies to control circuit devices having a rated voltage not exceeding 1 000 V AC (at a frequency not exceeding 1 000 Hz) or 600 V DC.
This fifth edition cancels and replaces the fourth edition published in 2016. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) update of the scope structure and exclusions;
b) requirements for control circuits;
c) update of the normal service conditions (e.g. shock and vibration);
d) update of information and marking requirements including environmental information requirements referencing IEC TS 63058:2021;
e) update of the constructional requirements and the corresponding tests considering safety aspects (e.g. artificial optical radiation, security aspects, limited energy source, stored charge energy circuit);
f) update of the EMC requirements according to the generic documents;
g) new requirements for reed contact magnetic switches in Annex D;
h) requirements for class II circuit devices achieved by double or reinforced insulation in Annex F;
i) update of pull-out tests in Annex G;
j) information requirements for audible signalling device in Annex J;
k) insertion of new Annex O.

  • Standard
    136 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60947-6-2:2023/AC:2023(Corrigendum)
Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS) (IEC 60947-6-2:2020/COR2:2023)
EN IEC 60947-6-2:2023/AC:2023-07
  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60947-6-1:2023(Main)
Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment (IEC 60947-6-1:2021)
EN IEC 60947-6-1:2023

This part of EN 60947applies to transfer switching equipment (TSE) to be used in power systems with interruption of the supply to the load during transfer, the rated voltage of which does not exceed 1 000 V a.c. or 1 500 V d.c.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60947-5-2:2020/A11:2022(Amendment)
Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches
EN IEC 60947-5-2:2020/A11:2022

EN-IEC 60947-5-2 applies to inductive and capacitive proximity switches that sense the presence of metallic and/or non-metallic objects, ultrasonic proximity switches that sense the presence of sound reflecting objects, photoelectric proximity switches that sense the presence of objects and non-mechanical magnetic proximity switches that sense the presence of objects with a magnetic field. Products covered by the scope of this document are not subjected to defined behaviours under fault conditions. Proximity switches with defined behaviour are covered by IEC 60947-5-3 and have to fulfil additional requirements. These proximity switches are self-contained, have semiconductor switching element(s) and are intended to be connected to circuits, the rated voltage of which does not exceed 250 V 50 Hz/60 Hz AC RMS or 300 V DC. Examples of typical applications for in-scope products: - factory automation and machinery industry; - logistic and packaging industry; - conveyor belts, lifts; - process industry; - power plants. Special applications (e.g. corrosive atmosphere) can cause additional requirements. This document is not intended to cover proximity switches with analogue outputs. The object of this document is to state for proximity switches: - definitions; - classification; - characteristics; - product information; - normal service, mounting and transport conditions; - constructional and performance requirements; - tests to verify rated characteristics. Products covered by the scope of this document are expected to be selected, installed, and maintained by skilled personnel only.

  • Amendment
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60947-3:2021/AC:2022(Corrigendum)
Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units (IEC 60947-3:2020/COR1:2021)
EN IEC 60947-3:2021/AC:2021-11

IEC corrected version

  • Corrigendum
    3 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60947-3:2021(Main)
Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units (IEC 60947-3:2020)
EN IEC 60947-3:2021

IEC 60947-3:2020 applies to switches, disconnectors, switch-disconnectors and fuse-combination units and their dedicated accessories to be used in distribution circuits and motor circuits of which the rated voltage does not exceed 1 000 V AC or 1 500 V DC.
This fourth edition cancels and replaces the third edition published in 2008, Amendment 1:2012 and Amendment 2:2015. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:


       
  • addition of critical load current tests for DC switches (see 9.3.9);

    •    
  • addition of requirements for a conditional short-circuit rating for disconnectors, switches, and switch-disconnectors protected by circuit-breakers (see 9.3.7.2);

    •    
  • addition of new categories for high-efficiency motors switching (see Annex A);

    •    
  • addition of new Annex E for connection to aluminium conductors;

    •    
  • addition of new Annex F for power losses measurement.

  • Standard
    99 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    99 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
kSIST FprEN IEC 60947-6-1:2026(Main)
Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment
FprEN IEC 60947-6-1:2025
  • Draft
    100 pages
    English language
    sale 10% off
    e-Library read for
    1 day