SIST EN 14366:2005+A1:2019
(Main)Laboratory measurement of noise from waste water installations
Laboratory measurement of noise from waste water installations
This document:
- specifies methods for the measurement of airborne and structure-borne sound produced in waste water and rain water installations under laboratory conditions;
- defines the expression of the results.
It is applicable to waste water piping systems and parts thereof, but not to the actual sources of the wastewater, e.g. lavatories, toilets and bathtubs or any active units. It applies to pipes with natural ventilation and made of any common material in commonly used diameters (up to 150 mm).
The results obtained can be used for the comparison of products and materials. It may serve in estimating the behaviour of waste water systems in a building under certain conditions. Nevertheless, this standard does not provide a normalized procedure for calculating the acoustical properties of such installations in a building.
Messung der Geräusche von Abwasserinstallationen im Prüfstand
Der vorliegende europäische Norm-Entwurf
¾ legt Verfahren fest, mit denen in Abwasser- und Regenwasserinstallationen entstandener Luft- und Körper-schall unter Laborbedingungen gemessen werden kann;
¾ legt die Angabe der Ergebnisse fest.
Er ist auf Abwasser-Rohrleitungssysteme und deren Teile, jedoch nicht auf die eigentlichen Abwasserquellen, z. B. Waschräume, Toiletten und Badewannen, anwendbar. Er ist auf Rohre mit natürlicher Lüftung anwendbar, die aus jedem üblichen Material bestehen können und die üblichen Durchmesser haben.
Die erhaltenen Ergebnisse können für den Vergleich von Produkten und Werkstoffen verwendet werden. Er kann zur Einschätzung des Verhaltens von Abwassersystemen in einem Gebäude unter bestimmten Bedingungen dienen. Diese Norm liefert jedoch kein normiertes Verfahren zur Berechnung der akustischen Eigenschaften solcher Installationen in einem Gebäude.
Mesurage en laboratoire du bruit émis par les installations d'évacuation des eaux usées
Le présent projet de Norme européenne :
¾ spécifie des méthodes permettant de mesurer le bruit aérien et le bruit structural générés par des installations d'évacuation des eaux usées et des eaux de pluie dans des conditions de laboratoire ;
¾ définit l'expression des résultats.
Il s'applique aux systèmes de canalisations d'évacuation des eaux usées et aux éléments associés, à l'exclusion des véritables sources des eaux usées, par exemple les cuvettes de WC, les toilettes et les baignoires ou tout équipement actif. Il s'applique aux canalisations avec aération naturelle, réalisées en un matériau courant quelconque dans des diamètres couramment utilisés (jusqu'à 150 mm).
Les résultats obtenus peuvent être utilisés pour comparer les produits et les matériaux. Cela peut servir à apprécier le comportement des systèmes d'évacuation des eaux usées dans un bâtiment dans certaines conditions. Néanmoins, la présente norme ne fournit pas de mode opératoire normalisé pour le calcul des propriétés acoustiques de telles installations dans un bâtiment.
Laboratorijsko merjenje hrupa pri napeljavah za odpadno vodo
Ta dokument:
– določa metode za merjenje strukturnega zvoka in zvoka v zraku, ki nastaja v napeljavah za odpadno vodo in deževnico pri laboratorijskih pogojih;
– določa izražanje rezultatov.
Uporablja se za cevne sisteme za odpadno vodo in njihove dele, vendar ne za dejanske vire odpadne vode, npr. umivalnike, stranišča in kopalne kadi ali katere koli dejavne enote. Uporablja se za cevi z naravnim prezračevanjem, ki so izdelane iz običajnih materialov in imajo najpogosteje uporabljene premere (do 150 mm).
Pridobljene rezultate je mogoče uporabiti za primerjavo izdelkov in materialov. Uporablja se lahko pri ocenjevanju obnašanja sistemov za odpadno vodo v stavbi pod določenimi pogoji. Kljub temu ta standard ne podaja normiranega postopka za izračun akustičnih lastnosti takšnih napeljav v stavbi.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 14366:2005+A1:2019
01-december-2019
Laboratorijsko merjenje hrupa pri napeljavah za odpadno vodo
Laboratory measurement of noise from waste water installations
Messung der Geräusche von Abwasserinstallationen im Prüfstand
Mesurage en laboratoire du bruit émis par les installations d'évacuation des eaux usées
Ta slovenski standard je istoveten z: EN 14366:2004+A1:2019
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
91.140.80 Drenažni sistemi Drainage systems
SIST EN 14366:2005+A1:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 14366:2005+A1:2019
---------------------- Page: 2 ----------------------
SIST EN 14366:2005+A1:2019
EN 14366:2004+A1
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2019
EUROPÄISCHE NORM
ICS 17.140.20; 91.140.80 Supersedes EN 14366:2004
English Version
Laboratory measurement of noise from waste water
installations
Mesurage en laboratoire du bruit émis par les Messung der Geräusche von Abwasserinstallationen im
installations d'évacuation des eaux usées Prüfstand
This European Standard was approved by CEN on 23 September 2004 and includes Amendment 1 approved by CEN on 28 July
2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14366:2004+A1:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 14366:2005+A1:2019
EN 14366:2004+A1:2019 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Notations . 7
5 Principle of the test method . 8
5.1 Structure-borne sound measurements (index s) . 8
5.2 Airborne sound measurement (index a) . 8
6 Equipment . 8
6.1 Requirements for the frequency range of measurement . 8
6.2 Requirements for the acoustic equipment . 8
6.3 Requirements for the hydraulic equipment . 8
6.4 Requirements for the wall structural sensitivity measuring equipment .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.