Transport information and control systems — Data interfaces between centres for transport information and control systems — Part 3: Data interfaces between centres for intelligent transport sytems (ITS) using XML (Profile A)

This document is applicable to data exchange between different systems. This document defines the message rules and procedures for communication between transport information and control systems using XML. This document clarifies how to package end-application messages and relevant data. This document defines the mechanism to request end-application data from the client and to deliver the requested data from the supplier. Several profiles are defined, however only Profile A is defined in this document. Other profiles will be defined in future parts of the ISO 14827 series of standards. A system can be both a client and a supplier of another system simultaneously, using multiple sessions.

Systèmes de commande et d'information des transports — Interfaces de données entre les centres pour systèmes de commande et d'information des transports — Partie 3: Interfaces de données entre centres pour systèmes intelligents de transport (ITS) utilisant XML

General Information

Status
Published
Publication Date
06-Jan-2019
Current Stage
9060 - Close of review
Start Date
02-Sep-2029
Ref Project

Buy Standard

Standard
ISO 14827-3:2019 - Transport information and control systems -- Data interfaces between centres for transport information and control systems
English language
27 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 14827-3
First edition
2019-01
Transport information and control
systems — Data interfaces between
centres for transport information and
control systems —
Part 3:
Data interfaces between centres for
intelligent transport sytems (ITS)
using XML (Profile A)
Systèmes de commande et d'information des transports — Interfaces
de données entre les centres pour systèmes de commande et
d'information des transports —
Partie 3: Interfaces de données entre centres pour systèmes
intelligents de transport (ITS) utilisant XML
Reference number
ISO 14827-3:2019(E)
©
ISO 2019

---------------------- Page: 1 ----------------------
ISO 14827-3:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 14827-3:2019(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 3
3 Terms and definitions . 3
4 Symbols and abbreviated terms . 4
5 Conformance . 5
6 Messaging rules . 5
6.1 General . 5
6.2 Push . 5
6.2.1 General. 5
6.2.2 General message structure . 6
6.2.3 Subscription message structure . 7
6.2.4 Publication message structure . 7
6.2.5 Receipt message structure . 8
6.3 Pull with SOAP . 8
6.3.1 General. 8
6.3.2 General message structure .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.