iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 25110:2017

(Main)

Electronic fee collection — Interface definition for on-board account using integrated circuit card (ICC)

Electronic fee collection — Interface definition for on-board account using integrated circuit card (ICC)

ISO 25110:2017 defines the data transfer models between roadside equipment (RSE) and integrated circuit card (ICC) and the interface descriptions between the RSE and on-board equipment (OBE) for on-board accounts using the ICC. It also provides examples of interface definitions and transactions deployed in several countries.

Perception du télépéage — Définition d'interface pour compte de bord utilisant une carte à circuit intégré (ICC)

ISO 25110:2017 définit les modèles de transfert de données entre les équipements routiers (RSE) et les cartes à circuit intégré (ICC), et décrit les interfaces entre les RSE et l'équipement embarqué (OBE) pour le compte de bord s'appuyant sur l'ICC. Il fournit également des exemples de définitions d'interfaces et de transactions déployées dans plusieurs pays. ISO 25110:2017 couvre les aspects suivants: - modèles de transfert de données entre les RSE et les ICC correspondant aux exigences opérationnelles catégorisées, et le mécanisme de transfert des données pour chaque modèle, - définition d'interface entre RSE et OBE en fonction de chaque modèle de transfert de données, - définition d'interface pour chaque modèle, - configuration fonctionnelle, - définition des commandes RSE pour l'accès à l'ICC, - format des données et définition des éléments de données pour les commandes RSE, et - un exemple de transaction pour chaque modèle en Annexe B.

General Information

Status
Published
Publication Date
23-Oct-2017
ICS
03.220.01 - Transport in general
35.240.60 - IT applications in transport
Technical Committee
ISO/TC 204 - Intelligent transport systems
Drafting Committee
ISO/TC 204/WG 5 - Fee and toll collection
Current Stage
9092 - International Standard to be revised
Completion Date
04-Jun-2024
Ref Project

Relations

Consolidates
ISO 29783-2:2015 - Prosthetics and orthotics — Vocabulary — Part 2: Prosthetic gait
Effective Date
06-Jun-2022
Revises
ISO/TS 25110:2013 - Electronic fee collection — Interface definition for on-board account using integrated circuit card (ICC)
Effective Date
10-Dec-2016

Buy Standard

ISO 25110:2017 - Electronic fee collection -- Interface definition for on-board account using integrated circuit card (ICC)ISO 25110:2017 - Electronic fee collection -- Interface definition for on-board account using integrated circuit card (ICC)
PreviousNext
Standard
ISO 25110:2017 - Electronic fee collection -- Interface definition for on-board account using integrated circuit card (ICC)
English language
34 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 25110:2017 - Perception du télépéage -- Définition d'interface pour compte de bord utilisant une carte a circuit intégré (ICC)ISO 25110:2017 - Perception du télépéage -- Définition d'interface pour compte de bord utilisant une carte a circuit intégré (ICC)
PreviousNext
Standard
ISO 25110:2017 - Perception du télépéage -- Définition d'interface pour compte de bord utilisant une carte a circuit intégré (ICC)
French language
35 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 25110
First edition
2017-11
Electronic fee collection — Interface
definition for on-board account using
integrated circuit card (ICC)
Perception du télépéage — Définition d'interface pour compte de
bord utilisant une carte à circuit intégré (ICC)
Reference number
ISO 25110:2017(E)
©
ISO 2017

---------------------- Page: 1 ----------------------
ISO 25110:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 25110:2017(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 2
3 Terms and definitions . 2
4 Abbreviated terms . 4
5 Data transfer models. 5
5.1 General . 5
5.1.1 Transparent type . 5
5.1.2 Caching type. 5
5.1.3 Buffering type . 5
5.2 Symbols . 6
5.3 Transparent type . 6
5.3.1 General. 6
5.3.2 Data transfer process . 6
5.4 Caching type . 7
5.4.1 General. 7
5.4.2 Data transfer process . 7
5.5 Buffering type .
...

NORME ISO
INTERNATIONALE 25110
Première édition
2017-11
Perception du télépéage —
Définition d'interface pour compte
de bord utilisant une carte à circuit
intégré (ICC)
Electronic fee collection — Interface definition for on-board account
using integrated circuit card (ICC)
Numéro de référence
ISO 25110:2017(F)
©
ISO 2017

---------------------- Page: 1 ----------------------
ISO 25110:2017(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2017, Publié en Suisse
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée
sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie, l’affichage sur
l’internet ou sur un Intranet, sans autorisation écrite préalable. Les demandes d’autorisation peuvent être adressées à l’ISO à
l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 25110:2017(F)

Sommaire Page
Avant-propos .iv
Introduction .v
1 Domaine d’application . 1
2 Références normatives . 2
3 Termes et définitions . 2
4 Abréviations . 4
5 Modèles de transfert de données . 5
5.1 Généralités . 5
5.1.1 Type transparent . 5
5.1.2 Type «mise en mémoire cache» . 5
5.1.3 Type «mise en mémoire tampon» . 5
5.2 Symboles . 5
5.3 Type transparent . 6
5.3.1 Généralité . 6
5.3.2 Processus de transfert de données . 6
5.4 Type «mise en mémoire cache» . 7
5.4.1 Généralité . 7
5.4.2 Processus de transfert de données . 7
5.5 Type «mise en mémoire tampon» . 7
5.5.1 Généralité .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO/TR 17783:2024(Main)
Intelligent transport systems — Mobility integration — Role and functional model for mobility services using low Earth orbit (LEO) satellite systems

This document describes a basic role and functional model for mobility services using low Earth orbit (LEO) satellite systems for ITS services. This document provides: a) a role and functional model using a LEO satellite system for mobility services; b) a description of the concept of operations (CONOPS), and the relevant role models; c) a conceptual architecture between actors involved; d) references for the key documents on which the architecture is based; e) a mobility service use case summary. In-vehicle control systems are not within the scope of this document. This document scope is limited to mobility services using physical and digital infrastructure. NOTE Physical infrastructure facilities include for example, battery charging facilities, dynamic charging facilities for battery electric vehicles, physical infrastructure markings, physical traffic regulation signs, mobility monitoring facilities, emergency response service support facilities, traffic operation control centre facilities, fee collection service facilities (e.g. road usage fee), battery electric vehicle charging facilities, online reservation and online mobility usage fee payment facilities, and other infrastructure platform facilities that support ITS mobility services.

  • Technical report
    17 pages
    English language
    sale 15% off
  • Draft
    18 pages
    English language
    sale 15% off
  • Draft
    18 pages
    English language
    sale 15% off
ISO
ISO 21177:2024(Main)
Intelligent transport systems — ITS station security services for secure session establishment and authentication between trusted devices

This document contains specifications for a set of ITS station security services required to ensure the authenticity of the source and integrity of information exchanged between trusted entities, i.e.: — between devices operated as bounded secured managed entities, i.e. "ITS Station Communication Units" (ITS-SCU) and "ITS station units" (ITS-SU) as specified in ISO 21217; and — between ITS-SUs (composed of one or several ITS-SCUs) and external trusted entities such as sensor and control networks. These services include the authentication and secure session establishment which are required to exchange information in a trusted and secure manner. These services are essential for many intelligent transport system (ITS) applications and services, including time-critical safety applications, automated driving, remote management of ITS stations (ISO 24102-2), and roadside/infrastructure-related services.

  • Standard
    99 pages
    English language
    sale 15% off
  • Standard
    104 pages
    French language
    sale 15% off
ISO
ISO/TR 17732:2024(Main)
Intelligent transport systems (ITS) — Communications — ITS communication role and functional model

This document describes a basic role model of communications as a common platform for ITS services including cooperative service in smart city areas: a) a framework for the provision of a communication service; b) a description of the concept of operations and the role models; c) a conceptual architecture between actors involved in the provision/receipt of communication; d) references for the key documents on which the architecture is based; e) a taxonomy of the organization of generic procedures, with a focus on the basic role and functional model of service for the introduction of communications including infrastructure facilities to support mobility in urban and rural areas. In-vehicle control system is not within the scope of this document. The scope of this document is limited to the communications using physical and digital infrastructure.

  • Technical report
    8 pages
    English language
    sale 15% off
ISO
ISO/TR 24317:2023(Main)
Intelligent transport systems — Mobility integration — Mobility integration needs for vulnerable users and light modes of transport

This document provides a review of mobility integration standardization efforts supporting all travellers using active and light transport modes and identifies gaps where additional standardization is potentially required. The gap analysis is focused on cooperative intelligent transportation systems (C-ITS) for all users, including people with disabilities, as they plan, manage and carry out their “complete trip”, including all connections and transfers, from end-to-end. The term “light mode conveyances" covers C-ITS for light power and active modes such as micromobililty vehicles (e.g. e-scooters), power or power-assisted vehicles (e.g. e-bikes, power wheelchairs), and full powered vehicles (e.g. motorcycles, mopeds). This document identifies areas where standardization is potentially required to resolve problems and challenges, or to create opportunities, particularly with respect to enhancing safety and the provision of end-to-end multimodal journeys and support.

  • Technical report
    25 pages
    English language
    sale 15% off
ISO
ISO/TR 12770:2023(Main)
Intelligent transport systems — Mobility integration — ITS data aggregation role and functional model

This document describes a basic role and functional model of the intelligent transport systems (ITS) data aggregation role, which is a basic role of ISO/TR 4445. It provides a paradigm describing: a) a framework for the provision of ITS data aggregation for cooperative ITS service application; b) a description of the concept of a role and functional model for such roles; c) a conceptual architecture between actors involved in the provision/receipt of ITS data aggregation; d) references for the key documents on which the architecture is based; e) a taxonomy of the organization of generic procedures.

  • Technical report
    11 pages
    English language
    sale 15% off
ISO
ISO 21219-19:2023(Main)
Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 19: Weather information (TPEG2-WEA)

This document defines the TPEG Weather (WEA) application for reporting weather information for travellers. It provides general weather-related information to all travellers and is not limited to a specific mode of transportation. This application does not provide specific weather-related safety warnings to drivers; these are provided as safety related messages as part of the TPEG2-TEC application (ISO 21219-15). The WEA application provides weather-related forecasts and status information over multiple time periods and for multiple, possibly linked, geographical areas. NOTE The presentation of the information is dependent on the specific human-machine interface (HMI) of the receiving device. Therefore, this document does not define any prerequisites for the HMI of the device. This document contains examples to help explain how some typical weather reports can be signalled (see Annex C) and suggested translations between WEA table codes and WMO SYNOP weather observation codes (see Annex D).

  • Standard
    61 pages
    English language
    sale 15% off
ISO
ISO 21219-17:2023(Main)
Intelligent transport systems — Traffic and travel information via transport protocol experts group, generation 2 (TPEG2) — Part 17: Speed information (TPEG2-SPI)

This document defines the TPEG Speed information (SPI) application for reporting speed information for travellers. Speed limits are usually indicated to the driver through roadside signs. Drivers who are aware of the speed limit at all times are more likely to drive safely, which improves road safety. Most speed limit signs are static and remain unchanged for years and are thus available through navigation system map databases. However, there is an increasing number of variable message signs, temporary signing (e.g. for road works) and also changed speed limits which are not yet reflected in the map databases. With the TPEG-SPI application, speed limit information is offered in an accurate way so that different lanes and different vehicle types can be differentiated. TPEG-SPI also allows the drivers to be aware of the current allowed (maximum) speed, by delivering timely information about the current position and values of speed limits to the navigation or driver assistance systems. These data are seen as informational and are intended to be encoded in a compact way to minimize bandwidth consumption. TPEG2-SPI supports direct and indirect speed limits. Direct speed limits are used for signs showing a maximum speed at which a vehicle is allowed to travel. Such speed limit signs can be static or dynamic. Indirect speed limits refer to the speed of other road users. It is primarily the vehicle in front of the own vehicle that is used as a reference.

  • Standard
    35 pages
    English language
    sale 15% off
ISO
ISO 21219-15:2023(Main)
Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 15: Traffic event compact (TPEG2-TEC)

This document specifies the "traffic event compact" (TEC) TPEG application. The TEC application has been specifically designed to support information about traffic events (e.g. road works, traffic jams). A specific form of traffic event is local hazard warnings which, being safety-related messages, are sent with high priority to warn a driver of unexpected dangerous situations (e.g. black-ice, accident beyond curves, obstacles on road, etc.). Generally, the TEC application is designed to allow receivers to: — ensure travel safety for the driver; — enable the calculation of alternative routes; — avoid delays (e.g. traffic jams); — warn the driver of obstructions on route; and — provide the driver with information on infrastructural problems (e.g. closed petrol stations, non-functioning emergency telephones).

  • Standard
    80 pages
    English language
    sale 15% off
ISO
ISO 21219-9:2023(Main)
Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 9: Service and network information (TPEG2-SNI)

This document specifies the method for delivering service and network information within a TPEG service. The TPEG-SNI application is designed to allow the efficient, language-independent delivery of information about the availability of the same service on another bearer channel, or similar service data from another service provider, directly from service provider to end-users. A number of tables of information are described in this document which provide comprehensive options for describing services, their timing, content, geographical coverage, etc. In all TPEG streams, it is mandatory to deliver the so-called guide to the service table (GST). Additionally, it is possible to signal linkage of content between different bearers and services.

  • Standard
    60 pages
    English language
    sale 15% off
ISO
ISO 21219-16:2023(Main)
Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 16: Fuel price information and availability (TPEG2-FPI)

This document specifies the TPEG fuel price information and availability (FPI) application. The FPI application has been specifically designed to support information from fuel stations, such as their location, fuel types offered and fuel pricing and availability information. The standardized delivery, via TPEG technology, of fuel price information has the following benefits for end users of a TPEG service: a) cost savings to the driver through improved ease of access to price information; b) potentially significant cost savings for fleet operators through improved ease of access to price information; c) environmental benefits from drivers not having to drive around to find the cheapest fuel prices; d) safety improvements for highways authorities, as drivers are less likely to run out of fuel if they are well-informed of local availability and prices; e) as availability of new fuels becomes more common, and more vehicles begin to use them (e.g. biofuels, hydrogen, etc.), drivers will be better informed about availability of fuelling stations. The TPEG FPI application (as an add-on service component next to traffic information, for example) is laid out to support large numbers of fuel stations and fuel prices with only modest bandwidth requirements The application described in this document (TPEG2-FPI) is not appropriate for cases where the objective is to inform electric vehicles of the location of charging stations and the availability of charging points. In such cases, the TPEG application TPEG2-EMI (electro mobility information) is chosen. This is because while TPEG2-FPI (the application described in this document) contains rudimentary support for electric charging stations, a TISA investigation revealed that a simple extension/differentiation of TPEG2-FPI is insufficient for addressing the evolving market needs of the electric vehicle market. Hence, a separate TPEG application has been created to serve the information needs of electric vehicles and their operators: TPEG2-EMI, specified in ISO/TS 21219-25.

  • Standard
    64 pages
    English language
    sale 15% off