iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 10137:2007

(Main)

Bases for design of structures - Serviceability of buildings and walkways against vibrations

Bases for design of structures - Serviceability of buildings and walkways against vibrations

ISO 10137:2007 gives recommendations on the evaluation of serviceability against vibrations of buildings, and walkways within buildings or connecting them or outside of buildings. It covers three recipients of vibrations: human occupancy in buildings and on walkways; the contents of the building; the structure of the building. It does not include bridges that carry vehicular traffic, even in conjunction with pedestrian traffic, nor the design of foundations or supporting structures of machinery.

Bases du calcul des constructions — Aptitude au service des bâtiments et des passerelles sous vibrations

General Information

Status
Published
Publication Date
06-Nov-2007
ICS
91.080.01 - Structures of buildings in general
91.120.25 - Seismic and vibration protection
Technical Committee
ISO/TC 98/SC 2 - Reliability of structures
Drafting Committee
ISO/TC 98/SC 2 - Reliability of structures
Current Stage
9093 - International Standard confirmed
Completion Date
15-Feb-2024
Ref Project

Relations

Revises
ISO 10137:1992 - Bases for design of structures — Serviceability of buildings against vibration
Effective Date
15-Apr-2008

Buy Standard

ISO 10137:2007 - Bases for design of structures - Serviceability of buildings and walkways against vibrationsISO 10137:2007 - Bases for design of structures - Serviceability of buildings and walkways against vibrations
PreviousNext
Standard
ISO 10137:2007 - Bases for design of structures - Serviceability of buildings and walkways against vibrations
English language
44 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 10137
Second edition
2007-11-15


Bases for design of structures —
Serviceability of buildings and walkways
against vibrations
Bases du calcul des constructions — Aptitude au service des bâtiments
et des passerelles sous vibrations




Reference number
ISO 10137:2007(E)
©
ISO 2007

---------------------- Page: 1 ----------------------
ISO 10137:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2007
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2007 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 10137:2007(E)
Contents Page
Foreword. v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions. 2
4 Description of the vibration problem. 4
4.1 General remarks. 4
4.2 Vibration source. 4
4.2.1 Vibration sources inside a building. 5
4.2.2 Vibration sources outside a building. 5
4.3 Transmission path. 5
4.4 Receiver . 5
5 Dynamic actions . 5
5.1 General remarks. 5
5.2 Machinery . 6
5.2.1 Rotating machinery . 6
5.2.2 Reciprocating machinery. 6
5.2.3 Impacting machinery. 6
5.2.4 Other machinery . 6
5.3 Vehicular traffic (road and rail).
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 23618:2022(Main)
Bases for design of structures — General principles on seismically isolated structures

This document specifies the principles regarding the design of seismically isolated structures under earthquake effects. This document also describes the principles of construction management and maintenance, since proper construction management and maintenance are important for realizing high quality seismic isolation structures. This document is not applicable to bridges and LNG tanks, although some of the principles can be referred to for the seismic isolation of those structures. This document is not applicable to seismic isolation structures that reduce the vertical response to earthquake ground motions, since this document mainly specifies seismic isolation structures that attenuate the horizontal response to horizontal earthquake ground motions. This document is not a legally binding and enforceable code. It can be viewed as a source document that is utilized in the development of codes of practice by the competent authority responsible for issuing structural design regulations. NOTE This document has been prepared mainly for the seismically isolated structures which have the seismic isolation interface applied between a superstructure and a substructure to reduce the effect of the earthquake ground motion onto the superstructure. In most cases, the substructure refers to the foundation of the structure. However, the substructure in this document consists of a structural system below the isolation interface that has been designed with sufficient rigidity and strength. Examples include locating the isolation interface in a mid-storey of the building or above the bridge piers (see Annex E).

  • Standard
    46 pages
    English language
    sale 15% off
ISO
ISO 23618:2022(Main)
Bases for design of structures — General principles on seismically isolated structures

This document specifies the principles regarding the design of seismically isolated structures under earthquake effects. This document also describes the principles of construction management and maintenance, since proper construction management and maintenance are important for realizing high quality seismic isolation structures. This document is not applicable to bridges and LNG tanks, although some of the principles can be referred to for the seismic isolation of those structures. This document is not applicable to seismic isolation structures that reduce the vertical response to earthquake ground motions, since this document mainly specifies seismic isolation structures that attenuate the horizontal response to horizontal earthquake ground motions. This document is not a legally binding and enforceable code. It can be viewed as a source document that is utilized in the development of codes of practice by the competent authority responsible for issuing structural design regulations. NOTE This document has been prepared mainly for the seismically isolated structures which have the seismic isolation interface applied between a superstructure and a substructure to reduce the effect of the earthquake ground motion onto the superstructure. In most cases, the substructure refers to the foundation of the structure. However, the substructure in this document consists of a structural system below the isolation interface that has been designed with sufficient rigidity and strength. Examples include locating the isolation interface in a mid-storey of the building or above the bridge piers (see Annex E).

  • Standard
    46 pages
    English language
    sale 15% off
ISO
ISO 3010:2017(Main)
Bases for design of structures — Seismic actions on structures

ISO 3010:2017 (including both the super structure and foundation) and other structures. ISO 3010:2017 is not applicable to certain structures, such as bridges, dams, geotechnical works and tunnels, although some of the principles can be referred to for the seismic design of those structures. ISO 3010:2017 is not applicable to nuclear power plants, since these are dealt with separately in other International Standards. In regions where the seismic hazard is low, methods of design for structural integrity can be used in lieu of methods based on a consideration of seismic actions. ISO 3010:2017 is not a legally binding and enforceable code. It can be viewed as a source document that is utilized in the development of codes of practice by the competent authority responsible for issuing structural design regulations. NOTE 1 This document has been prepared mainly for new engineered structures. The principles are, however, applicable to developing appropriate prescriptive rules for non-engineered structures (see Annex N). The principles could also be applied to evaluating seismic actions on existing structures. NOTE 2 Other structures include self-supporting structures other than buildings that carry gravity loads and are required to resist seismic actions. These structures include seismic force-resisting systems similar to those in buildings, such as a trussed tower or a pipe rack, or systems very different from those in buildings, such as a liquid storage tank or a chimney. Additional examples include structures found at chemical plants, mines, power plants, harbours, amusement parks and civil infrastructure facilities. NOTE 3 The level of seismic hazard that would be considered low depends not only on the seismicity of the region but also on other factors, including types of construction, traditional practices, etc. Methods of design for structural integrity include nominal design horizontal forces (such as an equivalent static loading determined from a simplified equivalent static analysis) which provide a measure of protection against seismic actions.

  • Standard
    60 pages
    English language
    sale 15% off
ISO
ISO 13033:2013(Main)
Bases for design of structures — Loads, forces and other actions — Seismic actions on nonstructural components for building applications

ISO 13033:2013 establishes the means to derive seismic actions on nonstructural components and systems (NSCS) supported by or attached to new or existing buildings. It also provides procedures for the verification of NSCS seismic capacities. NSCS include architectural elements, mechanical and electrical systems, and building contents. ISO 13033:2013 is not a legally binding and enforceable code. It is a source document that is utilized in the development of codes of practice by the competent authority responsible for issuing structural design regulations. It is intended for application by regional and national standards committees when preparing standards for the seismic performance of NSCS. ISO 13033:2013 does not specifically cover industrial facilities, including nuclear power plants, since these are dealt with separately in other International Standards. However, the principles in ISO 13033:2013 can be appropriate for the derivation of seismic actions for NSCS in such facilities.

  • Standard
    43 pages
    English language
    sale 15% off
ISO
ISO/IEC 29100:2024(Main)
Information technology — Security techniques — Privacy framework

This document provides a privacy framework which: — specifies a common privacy terminology; — defines the actors and their roles in processing personally identifiable information (PII); — describes privacy safeguarding considerations; — provides references to known privacy principles for information technology. This document is applicable to natural persons and organizations involved in specifying, procuring, architecting, designing, developing, testing, maintaining, administering, and operating information and communication technology systems or services where privacy controls are required for the processing of PII.

  • Draft
    22 pages
    English language
    sale 15% off
ISO
ISO/IEC 5927:2024(Main)
Computer graphics, image processing and environmental data representation — Augmented and virtual reality safety — Guidance on safe immersion, set up and usage

This document specifies how augmented reality (AR) and virtual reality (VR) devices are to be set up and used in the enterprise workplace in a manner that ensures health and safety (H&S) is maintained, H&S consequences are understood, and additional risks are not introduced. Within this concept of safe usage, there is particular focus on guidance around safe immersion (time) and safety in the workplace. This document defines the concepts of AR, VR, the virtuality continuum and other associated terms such as augmented virtuality and mixed reality. This document provides guidance on: a) setting up AR systems; b) setting up VR systems; c) safe usage and immersion in AR systems both in the consumer and enterprise domains; d) safe usage and immersion in VR systems both in the consumer and enterprise domains. This document focuses on visual aspects of AR and VR. Other modes such as haptics and olfactory are not addressed within this document. This document covers both the hardware (the physical AR/VR head mounted displays) and areas of visual stimulus (the environments and graphics displayed in those headsets). This document does not cover all possible visual stimulus scenarios; focus is directed toward those areas that are known to have implications on safe use. This specifically includes the source vection (visual illusion of self-motion in physically stationary AR/VR users) and/or motion (physical movement of AR/VR users) and associated safe use considerations. NOTE AR/VR have some shared safety concerns, but many are distinct to AR or VR and a consumer or enterprise environment. As such all of these are in scope, and this document is structured to account for these differences.

  • Draft
    27 pages
    English language
    sale 15% off
  • Draft
    27 pages
    English language
    sale 15% off
ISO
ISO/TR 18986:2024(Main)
Traditional Chinese medicine — Report on the global industry and standardization development of Panax ginseng

This document reports on the global industry and standardization development of Panax ginseng. It includes its origin and application history, medicinal value, geographical distribution, cultivation and processing methods, industry development, international trade, current status and development demands for standardization.

  • Draft
    32 pages
    English language
    sale 15% off
  • Draft
    32 pages
    English language
    sale 15% off
ISO
ISO 23217:2024(Main)
Injection systems for self-administration by paediatric patients — Requirements and guidelines for design

This document provides requirements and guidelines on the development of drug delivery systems intended for self-administration of medicinal products by the specific demographic group of paediatric patients who are performing some or all use steps required for their intended use. Use steps include any handling action performed after the patient has received the product; these can include but are not limited to: — transport – carrying the product while travelling (e.g. by walking, train, airplane, automobile, bus); — storage – storage by the patient in their home, school, office or in temporary storage cases before or between uses; — preparation – steps necessary to place the product in a state where it is ready to be administered; — operation – steps necessary to initiate, adjust, pause, stop, or otherwise manage the delivery of medication using the product; — maintenance – steps necessary to keep the product in good working order; — disposal – steps to ensure safe disposal of the product after use (e.g. placement of the product in a suitable receptacle). This document is applicable to injectable drug delivery systems for administration of medicinal products. Furthermore, this document can be useful for the development of other drug delivery devices or systems if they are intended for use by the paediatric population. Devices not in the scope of this document include catheters, for example those in the scope of ISO 10555 series, and infusion pump systems, e.g. IEC 60601-2-24 and aerosol delivery devices (ISO 20072).

  • Draft
    40 pages
    English language
    sale 15% off
  • Draft
    40 pages
    English language
    sale 15% off
ISO
ISO 24596:2024(Main)
Drinking water, wastewater and stormwater systems and services — Guidelines for the planning and implementation of infrastructure hardening for water and wastewater systems

This document provides guidelines for the planning and implementation of hardening of different water and wastewater infrastructures aiming to improve the resilience of water and wastewater services provided by water utilities through security measures. It applies to the determination of measures for the protection of water supply systems and sewer collection systems from unwanted or unplanned access, as part of risk management. This document is applicable to all water and/or wastewater utilities. This document does not include guidelines for the protection of large water sources such as lakes or rivers.

  • Draft
    33 pages
    English language
    sale 15% off
  • Draft
    33 pages
    English language
    sale 15% off
ISO
ISO/TS 22499:2024(Main)
Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene butt fusion joints using phased array ultrasonic testing

This document describes the phased array ultrasonic testing (PAUT) of polyethylene butt fusion (BF) joints, including pipe-to-pipe, pipe-to-fitting and fitting-to-fitting joints, used for the conveyance of fluids. This document provides a test, whereby the presence of imperfections such as voids, inclusions, lack of fusions, misalignment and particulate contamination in the BF joints can be detected. The document is only applicable to polyethylene pipes and fittings without a barrier to ultrasonic waves. This document also provides requirements for procedure qualification and guidance for personnel qualifications, which are essential for the application of this test technique. This document also covers the equipment, the preparation and performance of the test, the indication assessment and the reporting for polyethylene BF joints. Acceptance criteria are not covered in this document.

  • Draft
    22 pages
    English language
    sale 15% off
  • Draft
    22 pages
    English language
    sale 15% off