Traceability of finfish products — Specification on the information to be recorded in farmed finfish distribution chains

ISO 12877:2011 specifies the information to be recorded in farmed finfish supply chains in order to establish the traceability of products originating from farmed finfish. It specifies how traded fishery products are to be identified, and the information to be generated and held on those products by each of the food businesses that physically trade them through the distribution chains. It is specific to the distribution for human consumption of farmed finfish and their products, from finfish meal, breeding and finfish farming through to retailers or caterers.

Traçabilité des produits de la pêche — Spécifications relatives aux informations à enregistrer dans les chaînes de distribution des poissons d'élevage

General Information

Status
Published
Publication Date
07-Aug-2011
Current Stage
9093 - International Standard confirmed
Start Date
10-Jun-2025
Completion Date
13-Dec-2025
Ref Project
Standard
ISO 12877:2011 - Traceability of finfish products -- Specification on the information to be recorded in farmed finfish distribution chains
English language
41 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


INTERNATIONAL ISO
STANDARD 12877
First edition
2011-08-15
Traceability of finfish products —
Specification on the information to be
recorded in farmed finfish distribution
chains
Traçabilité des produits de la pêche — Spécifications relatives aux
informations à enregistrer dans les chaînes de distribution des poissons
d'élevage
Reference number
©
ISO 2011
©  ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2011 – All rights reserved

Contents Page
Foreword .iv
Introduction.v
1 Scope.1
2 Normative references.1
3 Terms and definitions .1
4 Abbreviations.2
5 Principle.3
6 Requirements.4
6.1 Identification of the units traded.4
6.2 Recording of information.4
6.3 Fish feed production .6
6.4 Breeders .10
6.5 Hatcheries .12
6.6 Fish farms.16
6.7 Live fish transporters.20
6.8 Processors .23
6.9 Transporters and storers.28
6.10 Traders and wholesalers .31
6.11 Retailers and caterers.34
6.12 Bringing in supplies from outside the domain.36
Bibliography.40

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 12877 was prepared by Technical Committee ISO/TC 234, Fisheries and aquaculture.
iv © ISO 2011 – All rights reserved

Introduction
There are increasing demands for detailed information on the nature and origin of food products. Traceability
is becoming a legal and commercial necessity.
The ISO definition of traceability concerns the ability to trace the history, application and location of that which
is under consideration, and for products this can include the origin of materials and parts, the processing
history and the distribution and location of the product after delivery. Traceability includes not only the
principal requirement to be able to physically trace products through the distribution chain, from origin to
destination and vice versa, but also to be able to provide information on what they are made of and what has
happened to them. These further aspects of traceability are important in relation to food safety, quality and
labelling.
The scheme specified in this International Standard does not demand perfect traceability, i.e. that a particular
retail product should be traceable back to a single farm and batch of origin, or vice versa from origin to
destination. Pragmatically, it is recognized that mixing of units is likely to occur at a number of stages in the
distribution chains, e.g. in grading at auction markets prior to sale and in the processing of raw materials into
products. Where such mixing occurs, the food business is transforming the trade units. The requirement for
traceability is that the business records the IDs of the received trade units that may be input to each created
trade unit, and vice versa. The particular product is then traceable back to a finite number of farms and
batches of origin, and vice versa.
Given the enormous variety of fish products and of their distribution chains that operate within and between
different countries, and varying legal requirements, the information specifications cannot itemize all the
information that may possibly be required in every situation. This International Standard provides a generic
basis for traceability. Flexibility is allowed for businesses to record further information, in their own
non-standardized files, but keyed to the same unit IDs.
The information remains in the ownership of the food business that generated it, but is available when
required by law for the purposes of traceability (in the event of a food safety problem) or by commercial
agreement between businesses. The structure, names and content of the information is standardized so that it
can be readily communicated from business to business through the distribution chains, ensuring common
understanding of terms and meanings.
Commercial arrangements for businesses to communicate information through the distribution chains are to
be encouraged, particularly for the information desired by the trade to be visible at the various transaction
points in the chains, but that is not the subject of this International Standard.
This International Standard is designed with electronic representation and communication of data in mind, but
this is not a requirement when using this International Standard. The specifications can be met by paper
systems, although the obvious benefits of business efficiency, including rapid communication, will be lost.

INTERNATIONAL STANDARD ISO 12877:2011(E)

Traceability of finfish products — Specification on the
information to be recorded in farmed finfish distribution chains
1 Scope
This International Standard specifies the information to be recorded in farmed finfish supply chains in order to
establish the traceability of products originating from farmed finfish. It specifies how traded fishery products
are to be identified, and the information to be generated and held on those products by each of the food
businesses that physically trade them through the distribution chains. It is specific to the distribution for human
consumption of farmed finfish and their products, from finfish meal, breeding and finfish farming through to
retailers or caterers.
NOTE Together with ISO 12875 for captured finfish, this International Standard provides a basis for implementing
chain traceability of finfish.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 8601, Data elements and interchange formats — Information interchange — Representation of dates and
times
ISO 3166-1, Codes for the representation of names of countries and their subdivisions — Part 1: Country
codes
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
traceability
ability to trace the history, application or location of that which is under consideration
NOTE 1 When considering a product, traceability can relate to
⎯ the origin of materials and parts,
⎯ the processing history, and
⎯ the distribution and location of the product after delivery.
NOTE 2 Adapted from ISO 9000:2005, definition 3.5.4.
3.2
Unique Logistic Unit Identifier
ULUI
any composition established for transport and/or storage that needs to be identified and managed through the
supply chain
3.3
Unique Trade Unit Identifier
UTUI
smallest unit which is guaranteed to retain its integrity as it moves from one link of the chain to the next
NOTE UTUI is the smallest unit that is kept whole and undivided with no change in content or label/identification.
4 Abbreviations
In this document, the following abbreviations apply.
EFSIS European Food Safety Inspection Service
ACC Aquaculture Certification Council
EPC Electronic Product Code, a unique number provided by GS1 used to identify instances of trade
items (individual trade units) particularly suited for representation in an RFID chip
FAO Food and Agriculture Organization of the United Nations
FBO Food Business Operator, generic term for someone in the supply chain who processes, sends or
receives relevant trade units or logistic units
GLN Global Location Number, a 13 digit globally unique number provided by GS1 used to identify
parties and physical locations
GMO Genetically Modified Organism
GMP Good Manufacturing Practice
GS1 Global non-profit organization dedicated to the design and implementation of global standards and
solutions to improve the efficiency and visibility of supply and demand chains globally and across
sectors. Previously EAN/UCC
GTIN Global Trade Item Number, a 8-14 digit globally unique number provided by GS1 used to identify
types of trade items (product types)
HACCP Hazard Analysis Critical Control Points
HS Harmonized Commodity Description and Coding System
ID Identifier
LU Logistic Unit
RFID Radio-Frequency Identification, the use of an object (typically referred to as an RFID tag) applied
to or incorporated into a product for the purpose of identification and tracking using radio waves
RFMO Regional Fisheries Management Organization
SGTIN Serialized Global Trade Item Number, a unique number provided by GS1 used to identify
instances of trade items (individual trade units) by extending the GTIN
2 © ISO 2011 – All rights reserved

SSCC Serial Shipping Container Code, an 18 digit globally unique number provided by GS1 used to
identify logistics units
TU Trade Unit
5 Principle
The fundamental principle of chain traceability is that Trade Units (TU) shall be identified by unique codes (UI).
This code may be globally unique in itself (for instance the GS1 SGTIN or EPC numbers) or it could be unique
in that particular scope only, which means that there should be no other TUs in that part of the chain that may
have the same number. If the scope (the company, the chain, the sector, the country, the product type, or
similar) is assigned a globally unique number, the combination of the globally unique scope number and the
locally unique TU number shall constitute a globally unique identifier for the TU.
NOTE 1 The UTUI term is introduced to indicate a TU identifier which is, or can be made, globally unique.
TUs may be grouped together to make Logistic Units (LUs) or LUs may be grouped together to make higher
level LUs. A fundamental principle of chain traceability is that logistic units shall be identified by a unique code.
This code may be globally unique in itself (for instance the GS1 SSCC code) or it could be unique in that
particular scope only, which means that there should be no other LUs in that part of the chain that may have
the same number. If the scope (the company, the chain, the sector, the country, the product type, or similar) is
assigned a globally unique number, the combination of the globally unique scope number and the locally
unique LU number shall constitute a globally unique identifier for the LU.
NOTE 2 The ULUI term is introduced to indicate a LU identifier which is, or can be made, globally unique.
The key to the operation of this traceability scheme is the labelling of each unit of goods traded, whether of
raw materials or finished products, with a unique ID. This shall be done by the food business that creates each
unit. Businesses that transform units, such as processors who convert the units of raw materials received into
the products dispatched, shall create new units and shall give them new IDs.
As indicated above, the simplest way of implementing UTUIs and ULUIs is to use the GS1 SGTIN/EPC and
SSCC codes. This practice is recommended, but is not mandatory. The central principle behind this
International Standard is that businesses which create TUs or LUs should assign unique numbers to them.
Each of the food businesses that create or physically trade in those units, throughout the distribution chains
from catcher through to retailer or caterer, shall generate and hold the information necessary for traceability.
The information is to be held on paper or electronically, keyed to the unit IDs.
The types of businesses identified in this International Standard for farmed finfish distribution chains are as
follows:
⎯ fish feed production, see 6.3;
⎯ breeders, see 6.4;
⎯ hatcheries, see 6.5;
⎯ fish farms, see 6.6;
⎯ live fish transporters, see 6.7;
⎯ processors, see 6.8;
⎯ transporters and storers, see 6.9;
⎯ traders and wholesalers, see 6.10;
⎯ retailers and caterers, see 6.11.
Any given farmed finfish distribution chain may be made up of some or all of these components but not
necessarily in the sequence listed.
6 Requirements
6.1 Identification of the units traded
Businesses that bring in supplies of fishery products from outside of the domain of the specifications and trade
them onwards shall identify each unit traded and record associated information elements as indicated in
Table 3 to Table 12.
6.2 Recording of information
To distinguish between the different categories of information, all information elements are classified as either
“shall”, “should” or “may”; for definitions, see Table 1.
Table 1 — Classification of informative elements
Definition Explanation
“shall” This category contains recordings related to “Shall” elements are data elements that it is deemed
identifiers and transformations that are necessary in necessary to record to ensure that traceability is
order to trace the history, application or location of an possible. Data elements relating to product
entity. This means the unique identity of trade and properties are not in this category, even if these
logistic units, as well as the dependencies between properties are essential for other purposes like
the identifiers of inputs and outputs in a process. product documentation or food safety.
“should” This category contains parameters that describe and This includes parameters like “species”, “ID of food
provide supporting information on the units being business”, “production date”, etc. If certification
traced. Common parameters required by law, according to this International Standard is to happen
commercial requirements or good manufacturing in the future, the “should” parameters are to be
practises are recorded, but only where an considered.
established international format or data list for the
value exists.
“may” This category contains parameters that describe and The “may” category is informative only, and it is
provide supporting information on the units being included to enable use and uptake of this
traced. It contains parameters that are not part of the International Standard. If certification according to
“should” category, but that may still be useful or this International Standard is to happen in the future,
relevant to record. It also contains parameters that the recording of “may” parameters are not to be
may be deemed important, but where no established considered when evaluating adherence. The list of
international format or data list exists. “may” elements is not definitive or exclusive, it is by
design extendible, and the threshold for including
new elements in this category is low.

Businesses that physically trade in fishery products shall generate and hold the required information,
appropriate to the type of business, for each of the units traded.
The detailed information requirements are tabulated in Table 2.
4 © ISO 2011 – All rights reserved

Table 2 — Information requirements to be recorded by the different businesses
Data
Create/
Food Business Operator (FBO) type Table Receive Transform Dispatch
a
Produce
prefix
Fish feed producers 3 FFE TU/LU Yes TU/LU TU/LU
Breeders 4 FBR  TU/LU TU/LU
Hatcheries 5 FHA TU/LU Yes TU/LU TU/LU
Fish farms 6 FFF TU/LU Yes TU/LU TU/LU
Live fish transporters 7 FTR TU/LU No LU TU/LU
Processors 8 FPR TU/LU Yes TU/LU TU/LU
Transporters and storers 9 FTS TU/LU No LU TU/LU
Traders and wholesalers 10 FTW TU/LU No TU/LU TU/LU
Retailers and caterers 11 FRC TU/LU
Bringing in materials from outside the 12 FOT TU/LU
domain
a
For the purposes of unique identification to establish an extendable framework for data element identification, each table has been

identified with a three letter alphanumeric code. This code plus three digits is used to give a unique number to each data element.

The information specifications separately tabulate the information to be recorded by each of these types of
business. Some businesses may carry out the functions of more than one of the types listed, for example
distribution businesses may act as wholesalers and as transporters, in which case those businesses shall
record the relevant information requirements for each of the functions carried out.
NOTE 1 This International Standard is limited in scope to the distribution for human consumption of farmed finfish and
their products. The captured and farmed finfish information specifications are substantially the same from processing
onward.
Pragmatically, it is recognized that some supplies of fish products and supplies of ingredients, etc., will come
from outside of the domain and may lack the required IDs and information records. To accommodate this, a
business that brings in fish and materials from outside of the domain is required to generate and hold the key
information necessary for the traceability of the units brought in, and if they are to be traded on, to label those
units with the required IDs.
NOTE 2 These specifications are designed with electronic representation and communication of data in mind, but this
is not a requirement when using this International Standard. The specifications can be met by paper systems, although the
obvious benefits of business efficiency, including rapid communication, will be lost.
Note that the specification is for data to be generated, recorded and stored at the respective link. For all links
except “Breeders”, relevant data shall be generated in a previous link in the supply chain and passed along
with the trade unit/logistic unit.
NOTE 3 In these tabulations, there is no repetition of the information originally recorded to describe the units created
and their history, although businesses receiving those units later in the distribution chain will often need some of that
information. The information is keyed to the unit IDs and can be supplied by commercial agreement between the
businesses without having to re-input the data.
Codes (country prefix) for the names of countries, dependent territories and special areas of geographical
interest shall be given in accordance with ISO 3166-1.
Date and time should be given in the formats specified in ISO 8601.
May
Should
Shall
6.3 Fish feed production
For the purposes of this International Standard, fish feed producers are considered to be businesses that
produce fish feed based on an indefinite range of ingredients. They may be considered as an equivalent to the
processors but will be presented as a separate link in this International Standard. Fish feed producers create
new trade units that can range from one feed bag to bulk units of several hundreds of tons passed into the
hands of the next food business.
Table 3 — Detailed information for fish feed production
Categorization
Data element Description Examples
FISH FEED
Country prefix plus unique national
NO - 123467890
identification number for the
Uni Fishfeed
FFE101 Food business ID organization, as well as the name x
1234 Narvik
and address of the food business
Norway
that operates the feed company
Country prefix plus unique national
NO - 123467890
identification number for the
Feed producer Uni Fishfeed dep. 02 1234 Narvik
FFE102 organization, as well as the name x
establishment ID Norway
and address or GLN of the feed
NO02F1234B
plant establishment
Feed producer GMP
FFE103 Names of certification schemes SGS  x
certification
Further information elements that
FFE150- (unassigned) describe the organization, linked to  x
feed producer establishment ID
FOR EACH UNIT RECEIVED
Identities
ULUI (if received as a logistic unit)
(00) 100653005555555558
FFE201 Unit ID or UTUI (if received as a separate x
978817525.0766.000010272
trade unit)
978817525.0766.000010123
If received as a logistic unit, the IDs
FFE202 Trade unit IDs of the trade units within the logistic 978817525.0766.000010131 x
unit
978817525.0766.000010272
Source
Country prefix plus unique national
identification number for the NO - 123467890
Previous Food Fishmeal A/S, Florø
organization, as well as the name
FFE203 x
Business ID
and address or GLN of food NO SF 123
business that operates fish meal/oil Norway
etc., producer establishment
Date and time of
FFE204 ISO 8601 format 2010-06-20T14:15 x
reception
6 © ISO 2011 – All rights reserved

May
Should
Shall
Table 3 (continued)
Categorization
Data element Description Examples
Control checks (either on logistic or separate trade units)
Type of checks and measured
results (organoleptic, physical,
Quality control chemical and microbiological, etc.)
FFE205 Yes, electronic form  x
checks or indication if records are available
in electronic form, on paper or are
not available
Production history
Temperature/time log of the Series of temperature (°C)/date
FFE206 Temperature record product holding area for the period and time points in ISO 8601 x
between reception and processing format
Transformation information
978817525.0766.000010123
List of IDs of created trade units
Related created trade
FFE207 that may incorporate part of this 978817525.0766.000010131 x
unit IDs
received trade unit
978817525.0766.000010272
UTUI-1 33 %, 7 250 kg
Fraction (%, kilos) of the received
FFE208 Fractions trade unit that goes into each UTUI-2 33 %, 7 250 kg  x
created unit
UTUI-3 33 %, 7 250 kg
Additional data
Further information elements that
FFE250- (unassigned) describe the received trade/logistic  x
unit, linked to UTUI/ULUI
FOR EACH NEW TRADE UNIT CREATED
Identity
FFE301 Unit ID UTUI 978817525.0766.000010123 x
Description
Net weight of created trade unit
FFE302 Net weight 10 kg x
(kg)
FFE303 Type of unit Bags, bulk, etc. Bulk  x
FFE304 Name/type of product Smolt feed (commercial name) Dynamic blue  x
Time of packing/labelling at end of
FFE305 Production date 2010-06-15 x
line, ISO 8601 format
FFE306 Product form Meal, pellets, pellets size, etc. Pellets, 2,5 – 7,0 mm x
List of ingredient names and % by Fat 37 %
FFE307 Composition x
weight Protein 55 %
Any use of GMO or products from
FFE308 GMO GMO in product or raw material; No x
Yes or No
May
Should
Shall
Table 3 (continued)
Categorization
Data element Description Examples
Best before or sell by date, as
FFE309 Date of durability Best before 2010-06-30 x
appropriate, ISO 8601 format
Records of further details of
product specification are available
FFE310 Product specification Paper  x
in electronic form, on paper or are
not available
SCI - followed by scientific name,
or
FAO - followed by FAO 3alpha
SCI - Mallotus villosus
code, or
Marine species that
FFE311 FAO - CAP x
went into fish meal
TSN - followed by Taxonomic
TSN - 162035
Serial Number
(may be repeated if several
species)
FAO area/RFMO area for captured
marine fish, or country of origin for
captured fish from inland waters
FFE312 Area/country of origin Spain x
and for farmed fish, or more
specific location (may be several
areas)
Production history
Records of process specification
FFE313 Process specification are available in electronic form, on Paper  x
paper or are not available
The business's own IDs of the
FFE314 Production lines IDs A3, B4  x
particular production lines used
Records of HACCP analysis and
critical control point checks are
FFE315 HACCP Paper  x
available in electronic form, on
paper or are not available
Type of checks and measured
results (swab tests, etc.) or
FFE316 Hygiene checks indication if records are available in Paper  x
electronic form, on paper or are not
available
Temperature/time record or
indication if records are available in
FFE317 Temperature records Electronic  x
electronic form, on paper or are not
available
Type of checks and measured
results (organoleptic, physical,
Product quality chemical and microbiological, etc.)
FFE318 Total bacterial count, 106/g  x
control checks or indication if records are available
in electronic form, on paper or are
are not available
8 © ISO 2011 – All rights reserved

May
Should
Shall
Table 3 (continued)
Categorization
Data element Description Examples
Transformation information
978817525.0766.000010123
Related received List of IDs of received trade units
FFE319 978817525.0766.000010131 x
trade unit IDs that make up this created trade unit
978817525.0766.000010272
UTUI-1 Fraction (25 % 50 kg)
Fraction (%, kilos) of the created
UTUI-2 Fraction (25 % 50 kg)
FFE320 Fractions unit that was made up by each x
UTUI-3 Fraction (25 % 50 kg)
received trade unit
UTUI-4 Fraction (25 % 50 kg)
Additional data
Further information elements that
FFE350- (unassigned) describe the created trade unit,  x
linked to UTUI
FOR EACH LOGISTIC UNIT CREATED
Identities
FFE401 Unit ID UTUI (00) 235467985462312345 x
978817525.0766.000010123
The IDs of the trade units within the
FFE402 Trade unit IDs 978817525.0766.000010131 x
logistic unit
978817525.0766.000010272
Additional data
Further information elements that
FFE450- (unassigned) describe the created logistic unit,  x
linked to ULUI
FOR EACH UNIT DISPATCHED (either as a logistic unit or a separate trade unit)
Identity
ULUI (if dispatched as a logistic
(00) 100653005555555558
FFE501 Unit ID unit) or UTUI (if dispatched as a x
978817525.0766.000010272
separate trade unit)
Production history
Temperature/time log of the Series of temperature (°C)/date
FFE502 Temperature record product holding area for the period and time points in ISO 8601 x
between processing and dispatch format
Destination
Country prefix plus unique national
identification number for the
NO - 123467890
organization, as well as the name
Next Food Business Hill Fishfarm
FFE503 and address of the food business x
ID 1234 Hitra
to whom the unit is dispatched
Norway
(transporter hatchery or fish farm,
etc.)
Date and time of Date and time of transfer to next
FFE504 2010-06-20T14:15 x
dispatch food business, ISO 8601 format
May May
Should Should
Shall Shall
Table 3 (continued)
Categorization
Data element Description Examples
Additional data
Further information elements that
describe the dispatched
FFE550- (unassigned)  x
trade/logistic unit, linked to
UTUI/ULUI
6.4 Breeders
For the purposes of this International Standard, breeders are considered to be establishments that produce
fish roe/eggs from broodstocks, often based on selection for special characteristics. They may carry out basic
operations on the roe/eggs and broodstock such as temperature and light manipulation, and chemical
treatments.
Prior to dispatch breeders may carry out their own operations, including quality grading and packing.
The trade units created by breeders can range from a few thousand to several millions of eggs passed into the
hands of the next food business.
Table 4 — Detailed information requirements for breeders
Categorization
Data element Description Examples
BREEDERS
Country prefix plus unique national
identification number for the organization, NO - 123467890
Food business
FBR101 Salmogen Ltd. x
as well as the name and address of the
ID
food business that operates the breeding 4321 Trondheim Norway
establishment
NO - 123467890
Country prefix plus unique national
Breeding
Salmogen Breeding Station 1
identification number for the organization,
FBR102 establishment x
1234 Trondheim
as well as the name and address of the
ID
Norway
breeding establishment
NTFS0001 NO
Breeder GMP Names of fish quality or food safety GMP
FBR103 Debio  x
certification schemes by which breeder is certified
Further information elements that describe
FBR150- (unassigned) the breeder, linked to breeder  x
establishment ID
10 © ISO 2011 – All rights reserved

May
Should
Shall
Table 4 (continued)
Categorization
Data element Description Examples
FOR EACH TRADE UNIT CREATED
Identity
FBR201 Unit ID UTUI 978817525.0766.000010123 x
Description
SCI - followed by scientific name, or
SCI - Salmo salar
FAO - followed by FAO 3alpha code, or
FBR202 Species FAO - SAS x
TSN - followed by Taxonomic Serial
Number
TSN - 161996
(may be repeated if several species)
Sum of average temperature per day in
FBR203 Day degrees 490 x
degrees Celsius (°C)
Percentage of eggs, from original batch,
FBR204 Viability 98 %  x
that survives until dispatched
Spawning
FBR205 Date of fertilization, ISO 8601 format 2010-09-25 x
date
Genetic Description of batch. All females, mixed
FBR206 Triploids  x
characteristics sex, triploids, etc.
FBR207 Genetic ID Stock name and year class MOWI 2000  x
Use of GMO in production or in feeding of
FBR208 GMO No  x
broodstock Yes/No
Production history
FBR209 Farm unit ID Internal number of rearing unit (tank ) 15 x
Temperature/time log of the product
Temperature (°C)/date and time points in
FBR210 holding area for the period between x
record ISO 8601 format
reception and dispatch
FBR211 Salinity record ‰ 0 ‰  x
Water flow
FBR212 Average use – litres/minute 10 l/min  x
record
Records of names and period of diseases
Disease or indication if records are available in Fungus infection
FBR213 x
record electronic form, on paper or are not 2009-03-02/2010-04-02
available
Weight of Weight of parental fish of created trade unit
FBR214 16, 15, 18, 14, 16 (kg)  x
parental fish (kg)
Age of Age of parental fish of created trade unit 3,12 – 3,05 – 3,05 – 3,05
FBR215  x
parental fish (years and months) (years)
Treatment Product name and batch number of Pyceze, B321123,
FBR216  x
record medicine or vaccine and period of use 2010-10-01/2010-10-01
Product name and batch number of fish
Feeding
FBR217 feed and (calculated) amount of feed that SupraFeed, B543345, 50 kg  x
record
went into this trade unit (kg)
May
Should
Shall
Table 4 (continued)
Categorization
Data element Description Examples
Additional data
Further information elements that describe
FBR250- (unassigned)  x
the created trade unit, linked to UTUI
FOR EACH LOGISTIC UNIT CREATED
Identities
FBR301 Unit ID ULUI (00) 100653005555555558 x
978817525.0766.000010123
The IDs of the trade units within the logistic
FBR302 Trade unit IDs 978817525.0766.000010131 x
unit
978817525.0766.000010272
Additional data
Further information elements that describe
FBR350- (unassigned)  x
the created logistic unit, linked to ULUI
FOR EACH UNIT DISPATCHED (either as a logistic unit or a separate trade unit)
Identity
ULUI (if dispatched as a logistic unit) or
(00) 100653005555555558
FBR401 Unit ID UTUI (if dispatched as a separate trade x
978817525.0766.000010272
unit)
Destination
Country prefix plus unique national
NO - 123467890
identification number for the organization,
Next Food
Fjord Harvest South Smolt
FBR402 as well as the name and address of the x
Business ID
3456 Bergen
food business to whom the unit is
Norway
dispatched (transporter or hatchery, etc.)
Date and time Date and time of transfer to next food
FBR403 2010-09-25T12:15 x
of dispatch business, ISO 8601 format
Additional data
Further information elements that describe
FBR450- (unassigned) the dispatched trade/logistic unit, linked to  x
UTUI/ULUI
6.5 Hatcheries
For the purposes of this International Standard, hatcheries are considered to be businesses that receive
roe/eggs and keep it/them during the hatching stage and start of the feeding stage, and dispatch fish to the
fish farms.
The hatcheries may change the nature of fishery products, by carrying out operations such as feeding,
grading, treatments, etc.
Hatcheries create new trade units that can range from a few thousand to several hundred thousand fishes
passed into the hands of the next food business.
12 © ISO 2011 – All rights reserved

May
Should
Shall
Table 5 — Detailed information requirements for hatcheries
Categorization
Data element Description Examples
HATCHERY
Country prefix plus unique national
NO - 123467890
identification number for the
Food business Fjord Harvest Ltd.
FHA101 organization, as well as the name and x
ID 1234 Trondheim
address of the food business that
Norway
operates hatchery establishment
Country prefix plus unique national NO - 123467890
identification number for the Fjord Harvest South Smolt,
Hatchery
FHA102 organization, as well as the name and 3456 Bergen x
establishment ID
address or GLN of hatchery Norway
establishment NTFS0002 NO
Names of fish quality or food safety
Hatchery GMP
FHA103 GMP schemes by which hatchery is Debio  x
certification
certified
Further information elements that
FHA150- (unassigned)  x
describe the organization, linked to
hatchery establishment ID
FOR EACH UNIT RECEIVED
Identities
ULUI (if received as a logistic unit) or
(00) 100653005555555558
FHA201 Unit ID UTUI (if received as a separate trade x
978817525.0766.000010272
unit)
978817525.0766.000010123
If received as a logistic unit, the IDs of
FHA202 Trade unit IDs 978817525.0766.000010131 x
the trade units within the logistic unit
978817525.0766.000010272
Source
Country prefix plus unique national
identification number for the NO - 123467890
Previous Food organization, as well as the name and Salmogen Breeding station 1
HA203 x
Business ID address of the food business that 1234 Trondheim
operates breeding company or Norway
transporter
Date and time of
FHA204 ISO 8601 format 2010-09-25T06:20 x
reception
Control checks (either on logistic or separate trade units)
Temperature
FHA205 Temperature (°C), i.e. in received unit 4,0 °C x
check
If recording device is affixed to batch,
Temperature (°C)/date and time points in ISO
FHA206 temperature/time record product  x
record 8601 format
holding area
Type of checks and measured results,
Quality control or indication if records are available in
FHA207 Paper  x
checks electronic form, on paper or are not
available
May
Should
Shall
Table 5 (continued)
Categorization
Data element Description Examples
Transformation information
978817525.0766.000010123
List of IDs of created trade units that
Related created
FHA208 may incorporate part of this received 978817525.0766.000010131 x
trade unit IDs
trade unit
978817525.0766.000010272
UTUI-1 Fraction (33 %, 150 kg)
Fraction (percentages, kilos) of the
FHA209 Fractions received trade unit that go into each UTUI-2 (Fraction (33 %, 150 kg) x
created unit
UTUI-3 Fraction (33 %, 150 kg)
Additional data
Further information elements that
FHA250- (unassigned) describe the received trade/logistic unit,  x
linked to UTUI/ULUI
FOR EACH NEW TRADE UNIT CREATED
Identity
ULUI (if dispatched as a logistic unit) or
(00) 100653005555555558
FHA301 Unit ID UTUI (if dispatched as a separate trade x
978817525.0766.000010272
unit)
Description
Average
FHA302 Average weight/size of created unit 75 g, 2.5 cm x
weight/size
Sum of average temperature per day in
FHA303 Day degrees 2984  x
degrees Celsius (°C)
FHA304 Hatching date Date of hatching, ISO 8601 format 2010-11-01  x
Figures for Plasma Cl or ATPase.
Smoltification
FHA305 Mean and standard deviation, previous 144 ± 6  x
status
to dispatch (salmon)
Records of malformation types and
percentage of total in original batch, or
FHA306 Malformation indication if records are available in Not available  x
electronic form, on paper or are not
available
Production history
FHA307 Farm unit ID Internal number of rearing unit (tank) 15 x
Records of names and period of
diseases, or indication if records are
FHA308 Disease record Paper x
available in electronic form, on paper or
are not available
Number of days with no feeding prior to
FHA309 Starving period 3 days x
transport
Temperature/time log of the product
Temperature (°C)/date and time points in
FHA310 holding area for the period between x
record ISO 8601 format
reception and dispatch
14 © ISO 2011 – All rights reserved

May
Should
Shall
Table 5 (continued)
Categorization
Data element Description Examples
Records of oxygen saturation in fish
rearing tank, or indication if records are
FHA311 Oxygen record List of O data x
available in electronic form, on paper or
are not available
Records of fish density in fish rearing
Fish density tank, or indication if records are
FHA312 Electronic  x
record available in electronic form, on paper or
are not available
Medicine, vaccine or chemical names
Treatment Pyceze, 2010-10-01 –
and period of use, or indication if
FHA313  x
record records are available in electronic form, 2010-10-01
on paper or are not available
Product name and batch number of fish
FHA314 Feeding record feed and (calculated) amount of feed SupraFeed, B543345, 50 kg  x
that went into this trade unit (kg)
Aquaculture
Name of scheme by which hatchery is ACC, GlobalGAP, Friend of the
FHA315 certification  x
certified Sea, etc.
scheme
Certification Identifier within the scheme that refers
FHA316 scheme to this trade unit (chain of custody 1122334455  x
identifier identifier for this trade unit)
Transformation information
978817525.0766.000010123
Related received List of IDs of received trade units that
FHA317 978817525.0766.000010131 x
trade unit IDs make up this created trade unit
978817525.0766.000010272
UTUI-1 Fraction (50 %
Fraction (percentages, kilos) of the
5 000 kg)
FHA318 Fractions created unit that was made up by each x
UTUI-2 Fraction (50 %
received trade unit
5 000 kg)
Additional data
Further information elements that
FHA350- (unassigned) describe the created trade unit, linked  x
to UTUI
FOR EACH LOGISTIC UNIT CREATED
Identities
FHA401 Unit ID ULUI (00) 100653005555555558 x
978817525.0766.000010123
The IDs of the trade units within the
FHA402 Trade unit IDs 978817525.0766.000010131 x
logistic unit
978817525.0766.000010272
May
Should
Shall
Table 5 (continued)
Categorization
Data element Description Examples
Additional data
Further information elements that
FHA450- (unassigned) describe the created logistic unit, linked  x
to ULUI
FOR EACH UNIT DISPATCHED
Identity
FHA501 Unit ID UTUI 978817525.0766.000010123 x
Destination
Country prefix plus unique national
NO - 123467890
identification number for the
Cargonor
Next Food organization, as well as the name and
FHA502 7890 Florø x
Business ID address of the food business to where
Norway
the unit is dispatched (transporter or
SF 123
fish farm, etc.)
Date and time of Date and time of transfer to next food
FHA503 2010-09-25T10:30 x
dispatch business, ISO 8601 format
Additional data
Further information elements that
FHA550- (unassigned) describe the dispatched trade/logistic  x
unit, linked to UTUI/ULUI
6.6 Fish farms
For the purposes of this International Standard, fish farms are
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...