ISO 18927:2013
(Main)Imaging materials — Recordable compact disc systems — Method for estimating the life expectancy based on the effects of temperature and relative humidity
Imaging materials — Recordable compact disc systems — Method for estimating the life expectancy based on the effects of temperature and relative humidity
ISO 18927:2013 specifies a test method for estimating the life expectancy of information stored on recordable compact disc systems. Only the effects of temperature and relative humidity on the media are considered.
Matériaux pour image — Systèmes de CD enregistrables — Méthode d'estimation de l'espérance de vie basée sur les effets de la température et de l'humidité relative
Upodobitveni materiali - Snemalni kompaktni diski - Metode za določanje pričakovane življenjske dobe na podlagi učinkov zaradi temperature in relativne vlage
General Information
Relations
Buy Standard
Standards Content (Sample)
SLOVENSKI STANDARD
SIST ISO 18927:2014
01-marec-2014
1DGRPHãþD
SIST ISO 18927:2011
8SRGRELWYHQLPDWHULDOL6QHPDOQLNRPSDNWQLGLVNL0HWRGH]DGRORþDQMH
SULþDNRYDQHåLYOMHQMVNHGREHQDSRGODJLXþLQNRY]DUDGLWHPSHUDWXUHLQUHODWLYQH
YODJH
Imaging materials - Recordable compact disc systems - Method for estimating the life
expectancy based on the effects of temperature and relative humidity
Matériaux pour image - Systèmes de CD enregistrables - Méthode d'estimation de
l'espérance de vie basée sur les effets de la température et de l'humidité relative
Ta slovenski standard je istoveten z: ISO 18927:2013
ICS:
35.220.30 2SWLþQHVKUDQMHYDOQH Optical storage devices
QDSUDYH
37.040.99 Drugi standardi v zvezi s Other standards related to
fotografijo photography
SIST ISO 18927:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ISO 18927:2014
---------------------- Page: 2 ----------------------
SIST ISO 18927:2014
INTERNATIONAL ISO
STANDARD 18920
Second edition
2011-10-01
Imaging materials — Reflection prints —
Storage practices
Matériaux pour l’image — Tirages par réflexion — Directives pour
l’archivage
Reference number
ISO 18920:2011(E)
©
ISO 2011
---------------------- Page: 3 ----------------------
SIST ISO 18927:2014
ISO 18920:2011(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2011 – All rights reserved
---------------------- Page: 4 ----------------------
SIST ISO 18927:2014
ISO 18920:2011(E)
Contents Page
Foreword .iv
Introduction . v
1 Scope . 1
2 Normative references . 2
3 Terms and definitions . 2
4 Enclosures and containers . 3
5 Storage housings . 3
6 Storage rooms . 4
6.1 Medium-term storage rooms . 4
6.2 Extended-term storage rooms . 4
7 Environmental conditions . 4
7.1 Temperature and humidity specifications for storage . 4
7.2 Environmental conditioning requirements . 7
7.3 Air purity . 8
7.4 Light, use, and display . 8
8 Fire-protective storage . 9
9 Print identification, handling and inspection . 9
9.1 Identification .
...
INTERNATIONAL ISO
STANDARD 18927
Third edition
2013-03-01
Imaging materials — Recordable
compact disc systems — Method for
estimating the life expectancy based
on the effects of temperature and
relative humidity
Matériaux pour image — Systèmes de CD enregistrables —
Méthode d’estimation de l’espérance de vie basée sur les effets de la
température et de l’humidité relative
Reference number
ISO 18927:2013(E)
©
ISO 2013
---------------------- Page: 1 ----------------------
ISO 18927:2013(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 18927:2013(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Purpose and assumptions . 4
4.1 Purpose . 4
4.2 Assumptions . 4
5 Measurements . 4
5.1 Summary . 4
5.2 Block error rate (BLER). 4
5.3 Test equipment . 5
5.4 Test specimen . 5
6 Accelerated stress test plan . 6
6.1 General . 6
6.2 Stress conditions . 7
6.3 Accelerated test cell sample population . 9
6.4 Time intervals .10
6.5 Test plan .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.